0
RESEARCH PAPERS

An Experimental Performance Evaluation of a Disk and Doughnut Type Heat Exchanger

[+] Author and Article Information
K. P. Goyal, B. K. Gupta

Mechanical Engineering Department, M.N.R. Engineering College, Allahabad, India

J. Heat Transfer 106(4), 759-765 (Nov 01, 1984) (7 pages) doi:10.1115/1.3246749 History: Received January 21, 1982; Online October 20, 2009

Abstract

This paper reports the results of an experimental study in which 158-mm-dia disk and doughnut type 1-2 oil coolers were tested for various combinations of flow rates and clearances between the doughnut baffle and the shell. Oil coolers of 45 L per minute capacity were tested at the diametral clearances of 0.6 mm, 0.87 mm, and 1.25 mm between the doughnut baffle and shell for various flow rates of oil and water. It is found that the decrease in overall heat transfer coefficient with increasing clearance is not significant for most practical purposes. In another series of tests, oil coolers of 90 L per minute capacity with shell surface roughnesses of 4 and 19 microns and diametral clearances of 0.07 mm, 0.33 mm, and 0.59 mm were tested. The experimental results indicate that in this range of low clearances, the overall heat transfer coefficient increases with increasing clearance and surface roughness.

Copyright © 1984 by ASME
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In