0
TECHNICAL PAPERS: Boiling and Condensation

Pool Boiling Heat Transfer in Aqueous Solutions of an Anionic Surfactant

[+] Author and Article Information
V. M. Wasekar, R. M. Manglik

Thermal-Fluids and Thermal Processing Laboratory, Department of Mechanical, Industrial and Nuclear Engineering, University of Cincinnati, Cincinnati, OH 45221-0072

J. Heat Transfer 122(4), 708-715 (May 18, 2000) (8 pages) doi:10.1115/1.1316785 History: Received August 16, 1999; Revised May 18, 2000
Copyright © 2000 by ASME
Your Session has timed out. Please sign back in to continue.

References

Bergles,  A. E., 1997, “Enhancement of Pool Boiling,” Int. J. Refrig., 20, pp. 545–551.
Webb, R. L., 1994, Principles of Enhanced Heat Transfer, John Wiley and Sons, New York.
Thome, J. R., 1990, Enhanced Boiling Heat Transfer, Hemisphere, New York.
Wasekar,  V. M., and Manglik,  R. M., 1999, “A Review of Enhanced Heat Transfer in Nucleate Pool Boiling of Aqueous Surfactant and Polymeric Solutions,” J. Enhanced Heat Transf., 6, pp. 135–150.
Ammerman,  C. N., and You,  S. M., 1996, “Determination of Boiling Enhancement Mechanism Caused by Surfactant Addition to Water,” ASME J. Heat Transfer, 118, pp. 429–435.
Wu,  W.-T., Yang,  Y.-M., and Maa,  J.-R., 1998, “Nucleate Pool Boiling Enhancement by Means of Surfactant Additives,” Exp. Therm. Fluid Sci., 18, pp. 195–209.
Westwater, J. W., 1956, “Boiling of Liquids,” Advances in Chemical Engineering, Vol. I, T. A. Drew and J. W. Hoopes, Jr., eds., Academic, New York, pp. 1–76.
Hahne, E., and Ribeiro, R., 1998, “Single Bubble Heat Transfer in Nucleate Pool Boiling,” Heat Transfer 1998, Vol. 2, KSME, Seoul, pp. 503–508.
Dushkin,  C. D., and Iliev,  Tz. H., 1994, “Dynamic Surface Tension of Micellar Solutions Studied by the Maximum Bubble Pressure Method: 2. Theory of the Solutions below CMC,” Colloid Polym. Sci., 272, pp. 1157–1165.
Jontz,  P. D., and Myers,  J. E., 1960, “The Effect of Dynamic Surface Tension on Nucleate Boiling Coefficients,” AIChE J., 6, No. 1, pp. 34–38.
Morgan,  A. I., Bromley,  L. A., and Wilke,  C. R., 1949, “Effect of Surface Tension on Heat Transfer in Boiling,” Ind. Eng. Chem., 41, pp. 2767–2769.
Iliev,  Tz. H., and Dushkin,  C. D., 1992, “Dynamic Surface Tension of Micellar Solutions Studied by the Maximum Bubble Pressure Method,” Colloid Polym. Sci., 270, pp. 370–376.
Wasekar, V. M., and Manglik, R. M., 2000, “Pool Boiling Heat Transfer in Aqueous Anionic Surfactant Solutions: Effect of Additive Molecular Weight,” Heat and Mass Transfer 2000, M. S. Loknath et al., eds., Tata McGraw-Hill, New Delhi, pp. 783–788.
Adamson, A. W., 1982, Physical Chemistry of Surfaces, 4th Ed., John Wiley and Sons, New York.
Rosen, M. J., 1989, Surfactants and Interfacial Phenomena, 2nd Ed., John Wiley and Sons, New York.
Podsushnyy,  A. M., Minayev,  A. N., Statsenko,  V. N., and Yakubovskiy,  Yu. V., 1980, “Effect of Surfactants and of Scale Formation on Boiling Heat Transfer to Sea Water,” Heat Transfer—Sov. Res., 12, No. 2, pp. 113–114.
Filippov, G. A. and Saltanov, G. A., 1982, “Steam-Liquid Media Heat-Mass Transfer and Hydrodynamics With Surface-Active Substance Additives,” Heat Transfer 1982, Vol. 4, Hemisphere, Washington DC, pp. 443–447.
Saltanov, G. A., Kukushkin, A. N., Solodov, A. P., Sotskov, S. A., Jakusheva, E. V., and Chempik, E., 1986, “Surfactant Influence on Heat Transfer at Boiling and Condensation,” Heat Transfer 1986, Vol. 5, Hemisphere, Washington DC, pp. 2245–2250.
Liu, T., Cai, Z., and Lin, J., 1990, “Enhancement of Nucleate Boiling Heat Transfer With Additives,” Heat Transfer Enhancement and Energy Conservation, T. N. Veziroglu et al., eds., Hemisphere, New York, pp. 417–424.
Edwards, D. A., Brenner, H., and Wasan, D. T., 1991, Interfacial Transport Processes and Rheology, Butterworth-Heinemann, Boston, Chapter 6.
CRC Press, 1986, CRC Handbook of Chemistry and Physics, 67th Ed., CRC Press, Boca Raton, FL.
Barry,  B. W., and Wilson,  R., 1978, “C. M. C., Counterion Binding and Thermodynamics of Ethoxylated Anionic and Cationic Surfactants,” Colloid Polym. Sci., 256, pp. 251–260.
Porter, M. R., 1994, Handbook of Surfactants, 2nd Ed., Blackie, London, Chapter 6.
Wang, T. A. A., 1993, “Influence of Surfactants on Nucleate Pool Boiling of Aqueous Polyacrylamide Solutions,” Ph.D. thesis, University of Illinois, Chicago, IL.
Chyu,  M.-C., and Bergles,  A. E., 1988, “Thermal Analysis of the Electrically Heated Cylindrical Test Section for Heat Transfer Experiments,” Exp. Therm. Fluid Sci., 1, pp. 19–27.
Moffatt,  R. J., 1988, “Describing the Uncertainties in Experimental Results,” Exp. Therm. Fluid Sci., 1, pp. 3–17.
Gaertner,  R. F., 1965, “Photographic Study of Nucleate Pool Boiling on a Horizontal Surface,” ASME J. Heat Transfer, 87, pp. 17–29.
Miaw, C. B., 1978, “A Study of Heat Transfer to Dilute Polymer Solutions in Nucleate Pool Boiling,” Ph.D. thesis, University of Michigan, Ann Arbor, MI.
Shakir, S., Thome, J. R., and Lloyd, J. R., 1985, “Boiling of Methanol-Water Mixtures on Smooth and Enhanced Surfaces,” Multiphase Flow and Heat Transfer, ASME, New York, pp. 1–6.
Nicol,  A. A., and Mclean,  J. T., 1968, “Boiling Heat Transfer From a Rotating Horizontal Cylinder,” Can. J. Chem. Eng., 46, pp. 304–308.
Ayub,  Z. H., and Bergles,  A. E., 1987, “Pool Boiling From GEWA Surfaces in Water and R-113,” Waerme-und Stoffuebertrag., 21, pp. 209–219.
Hsieh,  S.-S., and Weng,  C.-J., 1997, “Nucleate Pool Boiling Heat Transfer Coefficients of Distilled Water (H2O) and R-134a/Oil Mixtures From Rib-Roughened Surfaces,” ASME J. Heat Transfer, 119, pp. 142–151.
Borishanskii, V. M., 1969, “Correlation of the Effect of Pressure on the Critical Heat Flux and Heat Transfer Rates Using the Theory of Thermodynamic Similarity,” Problems of Heat Transfer and Hydraulics of Two-Phase Media, S. S. Kutateladze, ed., Pergamon Press, New York, pp. 16–37.
Cornwell,  K., and Houston,  S. D., 1994, “Nucleate Pool Boiling on Horizontal Tubes: A Convection-Based Correlation,” Int. J. Heat Mass Transf., 37, Suppl. 1, pp. 303–309.
Griffith,  P., and Wallis,  J. D., 1960, “The Role of Surface Conditions in Nucleate Boiling,” Chem. Eng. Prog., Symp. Ser., 56, pp. 47–62.
Tsujii, K., 1998, Surface Activity: Principles, Phenomena, and Applications, Academic, San Diego.
Jung, C., and Bergles, A. E., 1989, “Evaluation of Commercial Enhanced Tubes in Pool Boiling,” Heat Transfer Laboratory Report No. HTL-2, Rensselaer Polytechnic Institute, Troy, NY.
Bar-Cohen, A., 1992, “Hysteresis Phenomena at the Onset of Nucleate Boiling,” Pool and External Flow Boiling, ASME, New York, pp. 1–14.
Fritz,  W., 1935, “Berechnung des Maximalvolume von Dampfblasen,” Phys. Z., 36, pp. 379–388.
Caery, V. P., 1992, Liquid-Vapor Phase-Change Phenomena, Hemisphere, Washington DC.
Jensen, M. K., and Memmel, G. J., 1986, “Evaluation of Bubble Departure Diameter Correlations,” Heat Transfer 1986, Vol. 4, C. L. Tien et al., eds., Hemisphere, Washington, DC, pp. 1907–1912.
Yan,  Y., Kenning,  D., and Cornwell,  K., 1997, “Sliding and Sticking Vapor Bubbles Under Inclined Plane and Curved Surfaces,” Int. J. Refrig., 20, pp. 583–591.
Cornwell,  K., and Grant,  I. A., 1998, “Heat Transfer to Bubbles Under a Horizontal Tube,” Int. J. Heat Mass Transf., 41, pp. 1189–1197.
Gorenflo, D., Luke, A., and Danger, E., 1998, “Interactions Between Heat Transfer and Bubble Formation in Nucleate Boiling,” Heat Transfer 1998, Vol. 1, KSME, Seoul, pp. 149–174.
Tokiwa,  F., and Ohki,  K., 1967, “Micellar Properties of a Series of Sodium Dodecylpolyoxyethylene Sulfates From Hydrodynamic Data,” J. Phys. Chem., 71, pp. 1343–1348.
Manglik, R. M., 1998, “Pool Boiling Characteristics of High Concentration Aqueous Surfactant Emulsions,” Heat Transfer 1998, Vol. 2, KSME, Seoul, pp. 449–453.
Tzan,  Y. L., and Yang,  Y. M., 1990, “Experimental Study of Surfactant Effects on Pool Boiling Heat Transfer,” ASME J. Heat Transfer, 112, pp. 207–212.

Figures

Grahic Jump Location
Surface tension measurements for aqueous SDS solutions: (a) dynamic σ at room temperature, and (b) effect of temperature on the dynamic and equilibrium σ (values in ms refer to surface age)
Grahic Jump Location
(a) Schematic of experimental facility, and (b) cross-sectional view of cylindrical heater assembly
Grahic Jump Location
Roughness characteristic of heater surface: (a) three-dimensional roughness profiles using AFM, and (b) optical microscope images
Grahic Jump Location
Nucleate pool boiling data for distilled water
Grahic Jump Location
Pool boiling data for aqueous SDS solutions; arrows indicate incipience, and, except for 10,000 wppm, all data are for increasing heat flux
Grahic Jump Location
Effect of heater diameter and heat flux on the nucleate pool boiling performance of aqueous SDS solutions
Grahic Jump Location
Relative heat transfer performance of aqueous SDS solutions and its variation with heat flux and surfactant concentration
Grahic Jump Location
Boiling history for distilled water, and aqueous SDS solutions of 1000 and 2500 wppm

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In