TECHNICAL PAPERS: Gas Turbine Heat Transfer

Energy and Exergy Balance in the Process of Spray Combustion in a Gas Turbine Combustor

[+] Author and Article Information
S. K. Som, N. Y. Sharma

Department of Mechanical Engineering, Indian Institute of Technology, Kharagpur 721 302, India

J. Heat Transfer 124(5), 828-836 (Sep 11, 2002) (9 pages) doi:10.1115/1.1484393 History: Received May 09, 2001; Revised April 11, 2002; Online September 11, 2002
Copyright © 2002 by ASME
Your Session has timed out. Please sign back in to continue.


Faeth,  G. M., 1983, “Evaporation and Combustion of Sprays,” Prog. Energy Combust. Sci., 9, pp. 1–76.
Faeth,  G. M., 1987, “Mixing, Transport and Combustion in Sprays,” Prog. Energy Combust. Sci., 13, pp. 293.
Sirignano,  W. A., 1983, “Fuel Droplet Vaporization and Spray Combustion Theory,” Prog. Energy Combust. Sci., 9, pp. 291.
Sirignano,  W. A., 1986, “The Formulation of Spray Combustion Models: Resolutions Compared to Droplet Spacing,” ASME J. Heat Transfer , 108, pp. 633.
Sirignano,  W. A., 1988, “An Integrated Approach to Spray Combustion Model Development,” Combust. Sci. Technol., 58, pp. 231.
Dash,  S. K., Sengupta,  S. P., and Som,  S. K., 1991, “Transport Processes and Associated Irreversibilities in Droplet Evaporation,” Am. Inst. Aeronaut. Astronaut. J. Thermo Physics and heat Transfer, 5(3), pp. 366–371.
Dash,  S. K., and Som,  S. K., 1991, “Transport Processes and Associated Irreversibilities in Droplet Combustion in a Convective Medium,” Int. J. Energy Res., 15, pp. 603.
Puri,  I. K., 1992, “Second Law Analysis of Convective Droplet Burning,” Int. J. Heat Mass Transf., 35, pp. 2571.
Hiwase,  S. D., Datta,  A., and Som,  S. K., 1998, “Entropy Balance and Exergy Analysis in the Process of Droplet Combustion,” J. Phys. D, 31, pp. 1601.
Dash,  S. K., and Som,  S. K., 1993, “Thermodynamics of Spray Evaporation,” J. Phys. D, 26, pp. 574.
Dunbar,  W. R., and Lior,  N., 1994, “Sources of Combustion Irreversibility,” Combust. Sci. Technol., 103, pp. 41.
Westbrook,  C. K., and Dryer,  F. L., 1981, “Simplified Reaction Mechanisms for the Oxidation of Hydrocarbon Fuels in Flames,” Combust. Sci. Technol., 27, pp. 31–45.
Magnussen, B. F., Hjertager, B. H., 1977, “On Mathematical Modeling of Turbulent Combustion With Special Emphasis on Soot Formation and Combustion,” Sixteenth Symposium (International) on Combustion, The Combustion Institute, pp. 719–727.
Ozisik, M. N., 1973, Radiative Heat Transfer, Wiley, New York.
Sparrow, E. M., Cess, R. D., 1978, Radiation Heat Transfer, Hemisphere, Washington DC.
Clift, R., Grace, J. R., and Weber, M. E., 1978, Bubbles, Drops and Particles, Academic Press, New York.
Ranz,  W. E., and Marshall,  W. R., 1952, “Evaporation From Drops: Part II,” Chem. Eng. Prog., 48, pp. 173–180.
Mugele,  R. A., and Evans,  H. D., 1951, “Droplet Size Distribution in Sprays,” Ind. Eng. Chem., 43, 1317–1324.
Hirt,  C. W., and Cook,  J. L., 1972, “Calculating Three Dimensional Flows Around Structures and over Rough Terrain,” J. Comput. Phys., 10, pp. 324–341.
Harlow,  F. H., and Welch,  J. E., 1965, “Numerical Computation of Time Dependent Viscous Incompressible Flow of Fluid with a Free Surface,” Phys. Fluids, 8(12), pp. 2182–2190.
Cameron,  C. D., Brouwer,  J., Wood,  C. P., and Samuelson,  G. S., 1989, “A Detailed Characterization of Velocity and Thermal Fields in a Model Can Combustor With Wall Jet Injection,” ASME J. Eng. Gas Turbines Power, 3, pp. 31–40.
Chang,  K. C., and Chen,  C. S., 1993, “Development of a Hybrid k-ε Turbulence Model for Swirling Recirculating Flows Under Moderate to Strong Swirl Intensities,” Int. J. Numer. Methods Fluids, 16, pp. 421.
Dallenback, P. A., 1986, “Heat Transfer and Velocity Measurements in Turbulent Swirling Flow Through an Abrupt Axi-symmetric Expansion,” Ph.D thesis, Arizona State University, Tempe, A2.
Khalil, K. H., El Mahallawy, F. M., and Moneib, H. A., 1977, “Effect of Combustion Air Swirl on the Flow Pattern in a Cylindrical Oil Fired Furnace,” Sixteenth Symposium (International) on Combustion, The Combustion Institute., pp. 135–141.
Moran, M. J., and Shapiro, H. N., 1988, Fundamentals of Engineering Thermodynamics, John Wiley, New York.
Hirschfelder, J. C., Curtiss, C. F., and Bird, R. B., 1954, Molecular Theory of Gases and Liquids, John Wiley, New York.


Grahic Jump Location
Comparisons of predicted axial and tangential velocity distributions, with Chang and Chen 22 and Dellenback 23 (—Present computation, ○ Chang and Chen, and × Dallenback) (a) z/D=0.75; (b) z/D=4.0; (c) z/D=0.75; and (d) z/D=4.0.
Grahic Jump Location
Comparisons of predicted axial velocity and temperature distributions with experimental results of Khalil et al. 24 (—present computation, ○ Khalil et al.): (a) z/D=0.55; (b) z/D=0.55; (c) z/D=3.6; and (d) z/D=3.6.



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In