0
TECHNICAL PAPERS: Evaporation, Boiling, and Condensation

Prediction of Critical Heat Flux for Convective Boiling of Saturated Water Jet Impinging on the Stagnation Zone

[+] Author and Article Information
Zhen-Hua Liu, Qun-Zhi Zhu

School of Power and Energy Engineering, Shanghai Jiaotong University, Shanghai, 200030, P.R. China

J. Heat Transfer 124(6), 1125-1130 (Dec 03, 2002) (6 pages) doi:10.1115/1.1518497 History: Received February 14, 2001; Revised July 15, 2002; Online December 03, 2002
Copyright © 2002 by ASME
Your Session has timed out. Please sign back in to continue.

References

Monde,  M., and Kotto,  Y., 1978, “Burnout in a High Heat-Flux Boiling System with an Impinging Jet,” Int. J. Heat Mass Transf., 21, pp. 295–305.
Katto,  Y., and Shimizu,  M., 1979, “Upper Limit of CHF in the Saturated Forced Convection Boiling on a Heated Disk with a Small Impinging Jet,” ASME Heat Transfer , 101, pp. 265–269.
Monde,  M., 1980, “Burnout Heat Flux in Saturated Forced Convection Boiling with an Impinging Jet,” Heat Transfer-Jpn. Res., 9, pp. 31–41.
Monde,  M., and Okuma,  Y., 1985, “Critical Heat Flux of Saturated Forced Convection Boiling on a Heated Disk with an Impinging Jet-CHF in L-regime,” Int. J. Heat Mass Transf., 28, pp. 547–552.
Monde,  M., 1987, “Critical Heat Flux of Saturated Forced Convection Boiling on a Heated Disk with an Impinging Jet,” ASME J. Heat Transfer , 109, pp. 991–996.
Katto, Y. 1985, “Critical Heat Flux,” Advances in Heat Transfer, J. P. Harnett and T. F. Irvine, Jr., eds., 17 , Orland, pp. 20–35.
Sharan,  A., and Lienhard,  J. H., 1985, “On Predicting Boiling Burnout in the Jet-Disk Configuration,” ASME J. Heat Transfer , 107, pp. 398–401.
Katto,  Y., and Yokoya,  S., 1988, “Critical Heat Flux on a Disk Heater Cooling by a Circular Jet of Saturated Liquid Impinging at the Center,” Int. J. Heat Mass Transf. 31, pp. 219–227.
Monde,  M., and Inoue,  T., 1991, “Critical Heat Flux in Saturated Forced Convection Boiling on a Heated Disk with Multiple Impinging Jets,” ASME J. Heat Transfer , 113, pp. 722–727.
Monde,  M., 1991, “Critical Heat Flux in Saturated Forced Convection Boiling on a Heated Disk with One or Multiple Impinging Jets,” Trends in Heat Mass and Momentum Transfer,1, pp. 33–44.
Monde,  M., Kitajima,  K., Inoue,  T., and Mitsutaka,  Y., 1994, “Critical Heat Flux in a Convection Subcooled Boiling with an Impinging Jet,” ASME J. Heat Transfer , 7, pp. 512–518.
Monde,  M., and Mitsutake,  Y., 1996, “Critical Heat Flux in a Convection Subcooled Boiling with Multiple Impinging Jets,” ASME J. Heat Transfer , 117, pp. 241–243.
Zuber, N., 1959, “Hydrodynamic Aspects of Boiling Heat Transfer,” AEC Report No. AECU-4439.
Haramura,  Y., and Katto,  Y., 1983, “A New Hydrodynamic Model of Critical Heat Flux, Applicable Widely to Both Pool and Forced Convection Boiling on Submerged Bodies in Saturated Liquids,” Int. J. Heat Mass Transf., 26, pp. 389–399.
Mudawar,  I. A., Incroea,  T. A., and Incropera,  F. P., 1987, “Boiling Heat Transfer and Critical Heat Flux in Liquid Films Falling on Vertically-Mounted Heat Sources,” Int. J. Heat Mass Transf., 30, pp. 2083–2095.
Ueda,  T., Inoue,  M., and Nagatome,  S., 1981, “Critical Heat Flux and Droplet Entrapment Rate in Boiling of Falling Liquid Films,” Int. J. Heat Mass Transf., 24, pp. 1257–1266.
Baines,  R. P., El-Masri,  M. A., and Rohsenow,  W. M., 1984, “Critical Heat Flux in Flowing Liquid Films,” Int. J. Heat Mass Transf., 27, pp. 1623–1629.
Katto,  Y., Yokoya,  S., Miake,  S., and Taniguchi,  M., 1987, “Critical Heat Flux on a Uniformly Heated Cylinder in a Cross Flow of Saturated Liquid Over a Very Wide Range of Vapor to Liquid Density Ratio,” Int. J. Heat Mass Transf., 30, pp. 1971–1977.
Liu,  W., Nariai,  H., and Inasaka,  F., 2000, “Prediction of Critical Heat Flux for Subcooling Boiling,” Int. J. Heat Mass Transf., 43, pp. 3371–3390.
Ishigami, S. K., Nakamishi, J. K., and Hikoshichi, T. A., 1978, “Boiling Heat Transfer for a Plane Water Jet Impinging on a Hot Surface,” Proceedings of the 6th International Heat Transfer Conference, Hemisphere Publishing Corp., Washington, DC, 1 , pp. 445–450.
Nakamishi,  J. K., Ishigami,  S. K., Ochi,  T., and Morita,  I., 1980, “Two-Dimensional Water Jet Impinging for Cooling of High Temperature Plate,” Bull. JSME, 46, pp. 714–724.
Zhe,  J., Sun,  H., Ma,  C. F., Lei,  D., He,  C., and Tian,  Y., 1997, “Experimental Study on Heat Transfer of Water Jet and Spraying Cooling High Temperature Wall,” Chinese Journal of Engineering Thermophsics,18, pp. 629–633.
Liu,  H., and Wang,  J., 2001, “Study on Film Boiling Heat Transfer for Water Jet Impinging on a High Temperature Flat Plate,” Int. J. Heat Mass Transf., 44, pp. 2475–2481.
Kumagai,  S., Sano,  T., Kamata,  T., Suzuki,  S., and Kubo,  R., 1994, “Boiling Heat Transfer to an Impinging Jet in Cooling a Hot Metal Slab,” Bulletin of JASM (B),60, pp. 259–263.
Kumagai,  S., Sano,  T., Kamata,  T., Suzuki,  S., and Kubo,  R., 1995, “Transient Cooling of Hot Plate with Impinging Water Jet,” Bulletin of JASM (B),61, pp. 351–356.
Ma,  C. F., and Bergles,  A. E., 1986, “Jet Impinging Nucleate Boiling,” Int. J. Heat Mass Transf., 29, pp. 1095–1101.
Miyazaki,  H., and Siberman,  E., 1972, “Flow and Heat Transfer on a Flat Plate with a Two-Dimensional Laminar Jet Issuing from a Nozzle of Finite Height,” Int. J. Heat Mass Transf., 15, pp. 2097–2107.
Stephan,  K., and Abdelsalam,  M., 1980. “Heat Transfer Correlations for Natural Convection Boiling,” Int. J. Heat Mass Transfer, 23, pp. 73–81.

Figures

Grahic Jump Location
The schematic diagrams of the physical model and coordinate: (a) the mode A; and (b) the mode B
Grahic Jump Location
The schematic diagram of the experimental setup
Grahic Jump Location
The schematic diagram of a test specimen
Grahic Jump Location
Experimental results of boiling heat transfer for jet boiling: (a) the nozzle diameter of 10 mm (b) the nozzle diameter of 6 mm; and (c) the nozzle diameter of 2 mm.
Grahic Jump Location
Comparison between Eq. (21) and the CHF data
Grahic Jump Location
Comparisons between Eq. (22) and CHF data

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In