Levy,
E. K., 1971, “Optimum Plate Spacing for Laminar Natural Convection Heat Transfer from Parallel Vertical Isothermal Flat Plates,” ASME J. Heat Transfer, 93, pp. 463–465.

Bar-Cohen,
A., and Rohsenow,
W. M., 1984, “Thermal Optimum Spacing of Vertical, Natural Convection Cooled, Parallel Plates,” ASME J. Heat Transfer, 106, pp. 116–123.

Anand,
N. K., Kim,
S. H., and Fletcher,
L. S., 1992, “The Effect of Plate Spacing on Free Convection Between Heated Parallel Plates,” ASME J. Heat Transfer, 114, pp. 515–518.

Hu,
M. H., and Chang,
Y. P., 1973, “Optimization of Finned Tubes for Heat Transfer in Laminar Flow,” ASME J. Heat Transfer, 95, pp. 332–338.

Fabbri,
G., 1998, “Heat Transfer Optimization in Internally Finned Tubes Under Laminar Flow Conditions,” Int. J. Heat Mass Transfer, 41, pp. 1243–1253.

Kim,
S. J., Yoo,
J. W., and Jang,
S. P., 2002, “Thermal Optimization of a Circular-Sectored Finned Tube Using a Porous Medium Approach,” ASME J. Heat Transfer, 124, pp. 1026–1033.

Brown,
A., 1965, “Optimum Dimensions of Uniform Annular Fins,” Int. J. Heat Mass Transfer, 8, pp. 662–665.

Ulman,
A., and Kalman,
H., 1987, “Efficiency and Optimized Dimensions of Annular Fins of Different Cross-Section Shapes,” Int. J. Heat Mass Transfer, 32, pp. 1105–1110.

Kundu,
B., and Das,
P. K., 2001, “Performance Analysis and Optimization of Annular Fin with a Step Change in Thickness,” ASME J. Heat Transfer, 123, pp. 601–604.

Liu,
C. Y., 1960, “On minimum Weight Rectangular Radiating Fins,” J. Aerosp. Sci., 27, pp. 871.

Aziz,
A., and Kraus,
A. D., 1996, “Optimum Design of Radiating and Convective-Radiating Fins,” Heat Transfer Eng., 17, pp. 44–78.

Krikkis,
R. N., and Razelos,
P., 2002, “Optimum Design of Spacecraft Radiators with Longitudinal Rectangular and Triangular Fins,” ASME J. Heat Transfer, 124, pp. 805–811.

Ogiso,
K., 2001, “Assessment of Overall Cooling Performance in Thermal Design of Electronics Based on Thermodynamics,” ASME J. Heat Transfer, 123, pp. 999–1005.

Bejan,
A., 1979, “A Study of Entropy Generation in Fundamental Convective Heat Transfer,” ASME J. Heat Transfer, 101, pp. 718–725.

Mawardi,
A., and Pitchumani,
R., 2003, “Optimal Temperature and Current Cycles for Curing of Composites Using Embedded Resistance Heating Elements,” ASME J. Heat Transfer, 125, pp. 126–136.

Vynnycky,
M., Ferrari,
J., and Lior,
N., 2003, “Some Analytical and Numerical Solutions to Inverse Problems Applied to Optimizing Phase-Transformation Tracking in Gas Queching,” ASME J. Heat Transfer, 125, pp. 1–10.

Aung, W., 1988, Cooling Technology for Electronic Equipment, Hemisphere, New York.

Bejan,
A., 1997, “Constructal-Theory Network of Conducting Paths for Cooling a Heat Generating Volume,” Int. J. Heat Mass Transfer, 40, pp. 799–816.

Neagu,
M., and Bejan,
A., 2001, “Constructal Placement of High-Conductivity Inserts in a Slab: Optimal Design of Roughness,” ASME J. Heat Transfer 123, pp. 1184–1189.

Xia, Z. Z., and Guo, Z. Y., 2001, “Simulations on Optimization of Thermal Conduction by Life Evolvement Processes,” Advances on Natural Science (in Chinese), 11 , pp. 845–852.

James,
B. W., and Keen,
G. S., 1985, “A Nomogram for the Calculation of the Transverse Thermal Conductivity of Uniaxial Composite Lamina,” High Temp. - High Press., 17, pp. 477–480.

Ramani,
K., and Vaidyanathan,
A., 1995, “Finite Element Analysis of Effective Thermal Conductivity of Filled Polymeric Composites,” J. Compos. Mater., 29, pp. 1725–1740.

Islam,
Md. R., and Pramila,
A., 1999, “Thermal Conductivity of Fiber Reinforced Composites by the FEM,” J. Compos. Mater., 33, pp. 1699–1715.

Springer,
G. S., and Tsai,
S. W., 1967, “Thermal Conductivities of Unidirectional Materials,” J. Compos. Mater., 1, pp. 166–173.

Pitchumani,
R., and Yao,
S. C., 1991, “Correlation of Thermal Conductivities of Unidirectional Fibrous Composites Using Local Fractal Techniques,” ASME J. Heat Transfer, 113, pp. 788–796.

Zou,
M. Q., Yu,
B. M., and Zhang,
D. M., 2002, “An Analytical Solution for Transverse Thermal Conductivities of Unidirectional Fiber Composites With Thermal Barrier,” J. Phys. D, 35, pp. 1867–1874.

Thornburg, J. D., and Pears, C. D., 1965, “Prediction of the Thermal Conductivity of Filled and Reinforced Plastics,” ASME Paper 65-WA/HT-4.

Zehnder,
P., Schlunder,
E. U., 1970, “Thermal Conductivity of Granular Materials at Moderate Temperatures (in German),” Chem.-Ing.-Tech., 42, pp. 933–941.

Hus,
C. T., Cheng,
P., and Wong,
K. W., 1995, “A Lumped-Parameter Model for Stagnant Thermal Conductivity of Spatially Periodic Porous Media,” ASME J. Heat Transfer, 117, pp. 264–269.

Yu,
B. M., and Cheng,
P., 2002, “Fractal Models for the Effective Thermal Conductivity of Bi-Dispersed Porous Media,” J. Thermophys. Heat Transfer, 16, pp. 22–29.

Lu,
S. Y., 1995, “The Effective Thermal Conductivities of Composites with 2-D Arrays of Circular and Square Cylinders,” J. Compos. Mater., 29, pp. 483–506.

James,
B. W., Wostenholm,
G. H., Keen,
G. S., and Mclvor,
S. D., 1987, “Prediction and Measurement of the Thermal Conductivity of Composite Materials,” J. Phys. D, 20, pp. 261–268.