An Improved Cluster-Renewal Model for the Estimation of Heat Transfer Coefficients on the Furnace Walls of Commercial Circulating Fluidized Bed Boilers

[+] Author and Article Information
Animesh Dutta

Greenfield Research Incorporated, P.O. Box #25018, Halifax, NS, B3M 4H4, Canada

Prabir Basu

Mechanical Engineering Department, Dalhousie University, P.O. Box #1000, Halifax, NS, B3J 2X4, Canada

J. Heat Transfer 126(6), 1040-1043 (Jan 26, 2005) (4 pages) doi:10.1115/1.1833360 History: Received June 03, 2003; Revised July 17, 2004; Online January 26, 2005
Copyright © 2004 by ASME
Your Session has timed out. Please sign back in to continue.


Subbarao,  D., and Basu,  P., 1986, “A Model for Heat Transfer in Circulating Fluidized Beds,” Int. J. Heat Mass Transfer, 29, pp. 487–489.
Lints, Michael. C., and Glicksman, L. R., 1994, “Parameters Governing Particle to Wall Heat Transfer in a Circulating Fluidized Bed,” Circulating Fluidized Bed Technology IV, edited by A. A. Avidan, pp. 297–304.
Borodulya, V. A., and Teplitsky, Yu. S., 1999, “Prediction of Average Heat Transfer Coefficients Between a Riser’s Wall and Circulating Fluidized Bed: Effect of Pressure and Temperature,” Circulating Fluidized Bed Technology VI, edited by Werther, J., Dechema, Germany, pp. 379–384.
Noymer,  P. D., and Glicksman,  L. R., 2000, “Descent Velocities of Particle Clusters at the Wall of a Circulating Fluidized Bed,” Chem. Eng. Sci., 55, pp. 5283–5289.
Breitholtz, C., 2000, “Heat Transfer in Circulating Fluidized Bed Boilers,” Ph.D. thesis, Chalmers University of Technology, Goteborg, Sweden.
Basu, P., Kefa, C., and Jestin, L. 2000, Boilers and Burners Design and Theory, Springer, New York.
Wen,  C. Y., and Miller,  E., 1961, “Heat Transfer in Solid-Gas Transport Lines,” J. Ind. Eng. Chem.,53, pp. 51–53.
Basu, P., and Fraser, S. A., 1991, Circulating Fluidized Bed Boilers-Design and Operation, Butterworths-Heinemann, Stoneham.
Dittus, F. W., and Boelter, L. M. K., 1930, Heat Transfer in Automobile Radiators of the Tubular Type, University of California, pp. 13, 443.
Golriz, M. R., and Grace, J. R., 2002, “Predicting Heat Transfer in Large-Scale CFB Boilers,” Circulating Fluidized Bed Technology VII, edited by Grace, J. R., Zhu, J., and Lasa, H. D., Niagara Falls, Canada, pp. 121–128.
Perry, R. H., Green, D. W., and Maloney, J. O., 1984, “Heat Transmission,” in Perry’s Chemical Engineering Handbook, 6th ed., pp. 10–17.
Dutta, A., 2002, “Heat Transfer in Circulating Fluidized Bed Boilers,” Ph.D. thesis, Dalhousie University.
Glicksman, L. R., 1997, “Heat Transfer in Circulating Fluidized Beds,” in Circulating Fluidized Beds, edited by Grace, J. R., Avidan, A. A., and Knowlton, T. M., Chapman & Hall, London, pp. 261–310.
Divilio, R. J., and Boyd, T. J., 1994, “Practical Implications of the Effect of Solids Suspension Density on Heat Transfer in Large-Scale CFB Boilers,” in Proceedings of the 4th International Conference Circulating Fluidized Beds, Hidden Valley, PA, pp. 334–339.
Baskakov,  A., Leckner,  B., and Breitholtz,  K., 2001, “Complex Heat Transfer Furnaces With a Circulating Fluidized Bed,” Heat Transfer-Sov. Res., 32, pp. 343–348.
Dutta,  A., and Basu,  P., 2002, “Overall Heat Transfer to Water-Walls and Wing-Walls of Commercial Circulating Fluidized Bed Boilers,” J. Inst. Energy, 75, pp. 85–90.
Andersson,  B.-A., 1996, “Effect of Bed Particle Size on Heat Transfer in Circulating Fluidized Bed Boilers,” Powder Technol., 87, pp. 233–238.
Blumel, W. P., Kaferstein, P., Rummel, A., and Morl, P., 1992, “Wirbelschichtsysteme,” VGB conference.
Xiaozhong, J., Junfu, L., Qing, L., Yong, L., Jiansheng, Z., Xing, X., and Guangxi, Y., 1999, “Investigation on the Heat Transfer in a CFB Boiler,” in Circulating Fluidized Bed Technology VI, edited by J. Werther, pp. 355–360, Wurzburg, Germany.
Couturier, M. F., Steward, F. R., and Poolpol, S., 1993, “Experimental Determination of Heat Transfer Coefficients in a 72 MWt Circulating Fluidized Bed Boiler,” in Proceedings of the 12th International Conference Fluidized Bed Combustion, edited by L. Rubow and G. Commonwealth, ASME, pp. 1215–1222.
Werdermann, C. C., and Werther, J., 1994, “Heat Transfer in Large Scale Circulating Fluidized Bed Combustors of Different Sizes,” in Circulating Fluidized Bed Technology IV, edited by Avidan, AIChE, New York, pp. 428–435.
Boyd, T. J., and Friedman, M. A., 1991, “Operation and Test Program Summary at the 110 MWe Nucla CFB,” in Circulating Fluidized Bed Technology III, edited by P. Basu, M. Horio, and M. Hasatani, Pergamon Press, Oxford, pp. 297–312.
Jestin, L., Meyer, P., Schmitt, C., and Morin, J. X., 1992, “Heat Transfer in a 125 MWe CFB Boiler,” presented at the Engineering Foundation Conf. Australia.


Grahic Jump Location
Comparison of estimated [Eqs. (1234567891011121314)] versus predicted [Eq. (16)] wall coverage for a number of commercial boilers
Grahic Jump Location
Predicted heat transfer coefficient with measured heat transfer coefficient




Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In