Technical Briefs

Turbulent Heat Transfer Over a Moving Surface Due to Impinging Slot Jets

[+] Author and Article Information
Himadri Chattopadhyay1

Mem. ASME Department of Mechanical Engineering,  Jadavpur University, Kolkata 700032, Indiachimadri@gmail.com

Ali Cemal Benim

Department of Mechanical Engineering,  Düsseldorf University of Applied Sciences, 40474 Düsseldorf, Germany


Corresponding author.

J. Heat Transfer 133(10), 104502 (Aug 17, 2011) (5 pages) doi:10.1115/1.4004075 History: Received October 28, 2010; Revised April 19, 2011; Published August 17, 2011; Online August 17, 2011

In the present paper, turbulent heat transfer characteristics of submerged slot jets impinging on a moving surface at a constant temperature up to a Reynolds number of 50,000 have been studied. The turbulent flow field was resolved using the realizable k-ɛ model due to Shi [1995, “A New k-ɛ Eddy-Viscosity Model for High Reynolds Number Turbulent Flows-Model Development and Validation,” Comput. Fluids, 24 , pp. 227–238] after rigorously establishing the adequacy of the model by comparison with large-eddy simulation data. A periodic element from a jet-bank configuration was chosen in the direction of the surface movement. The distribution of heat transfer on impinging surface is found to be significantly affected by the plate motion. However, the mean velocity distribution along vertical direction in the stagnation region is not affected by the plate motion. With increasing surface motion, the initial symmetric distribution changes to an inclined-S type pattern in the direction of the surface movement up to a certain level of surface velocity and the average heat transfer reduces. When the surface motion crosses this level, the net heat transfer starts increasing. The amount of heat transfer was found to be linked with the level of turbulent kinetic energy close to the impingement surface. The surface velocity at which the heat transfer reaches the value corresponding to the fixed surface value increases with increasing Reynolds number.

Copyright © 2011 by American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.



Grahic Jump Location
Figure 1

Computational domain showing periodic element of a nozzle-bank

Grahic Jump Location
Figure 2

Comparison of turbulent model with LES data at vs  = 2.0

Grahic Jump Location
Figure 3

Decay of centerline velocity along jet axis at different surface velocities

Grahic Jump Location
Figure 4

Distribution of turbulent kinetic energy at z = 0.05

Grahic Jump Location
Figure 5

Nu distribution along the direction of plate movement

Grahic Jump Location
Figure 6

Nu distribution at vs  = (a) 0.0 and (b) 2.0

Grahic Jump Location
Figure 7

Nusselt number contour on the impinging surface for Re = 10,000 (a) stationary surface and (b) surface with vs  = 2.0

Grahic Jump Location
Figure 8

Variation of area-averaged Nu. (Ellipse indicates when heat transfer is equal to the case of the stationary surface.)



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In