High-Speed Surface Plasmon Resonance (SPR) Reflectance Imaging of Drop Coalescence during Condensation and Evaporation

[+] Author and Article Information
Vinaykumar Konduru

Michigan Technological University

Dong Hwan Shin

Michigan Technological University

Jeffrey S. Allen

Michigan Technological University

Chang Kyoung Choi

Michigan Technological University

Seong Hyuk Lee

Chung-Ang University

Young-Ki Choi

Chung-Ang University

Sosan Cheon

Seoul National University

Kenneth D. Kihm

University of Tennessee

1Corresponding author.

J. Heat Transfer 138(8), 080903 (Jul 08, 2016) (1 page) Paper No: HT-16-1205; doi: 10.1115/1.4033819 History: Received April 15, 2016; Revised April 27, 2016


Drop condensation and coalescence is visualized using high-speed Surface Plasmon Resonance (SPR) reflectance microscopy. SPR microscopy is a label-free technique that can characterize thin films (less than 1µm) by detecting the changes in the refractive index of the test medium. The sensing surface is a 50 nm thick gold film on a 2.5 nm thick Ti layer is deposited on a borosilicate substrate. P-polarized monochromatic light (632 nm) is incident on the gold film in a total internal reflection mode. Free electrons in the gold film are excited by the incident light when a resonance condition is met. The result is a decrease in the reflected intensity. Resonance depends upon wavelength, incident angle, and refractive index of prism and test medium. To induce condensation, a water bridge is created between the SPR gold film and an ITO coated glass slide. When the ITO coated slide is heated water evaporates from the bridge and condenses on the gold film. The sequence of images on the process of droplet deposition and drop coalescence are captured at 1500 frames per second. Experiments were conducted at an SPR angle of 44o, which is slightly above the minimum intensity angle for air at 43.8o. Therefore, the brightest and darkest regions correspond to the areas on the gold film covered with bulk water and a very thin film of water, respectively. The thickness of the film is proportional to the intensity of reflected light.

Copyright © 2016 by ASME
Your Session has timed out. Please sign back in to continue.





Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In