Numerical Simulation of Evaporating Two-Phase Flow in a High-Aspect-Ratio Microchannel with Bends PUBLIC ACCESS

[+] Author and Article Information
Adam Girard

Multi-Scale Heat Transfer Lab, Department of Mechanical Engineering, University of Texas at Dallas, Richardson, TX 75080, USA

Seung M. You

Multi-Scale Heat Transfer Lab, Department of Mechanical Engineering, University of Texas at Dallas, Richardson, TX 75080, USA

Suresh V. Garimella

School of Mechanical Engineering, Purdue University, West Lafayette, IN 47907-2088 USA

J. Heat Transfer 139(8), 080904 (Jun 05, 2017) Paper No: HT-17-1162; doi: 10.1115/1.4036879 History: Received March 20, 2017; Revised May 03, 2017


Flow boiling was investigated on a hydrophobic surface by coating Teflon® onto a 1×1 cm2 copper surface, resulting in contact angle of 118°. The images depicted were taken using distilled water flowing at 299 kg/m2s with 3°C subcooling. In the first series, the number of active nucleation sites increased as heat flux increased. For lower values of heat flux (< 80 kW/m2), vapor bubbles remained almost stationary on the surface. The hydrophobic contact angle makes the horizontal component of surface tension force act radially outward, causing the bubble interface to grow. This leads to increased triple contact line and increased vertical component surface force. The buoyancy force due to the vapor bubble volume appears to be insufficient to overcome this vertical force for liftoff. This explains the stationary bubbles observed at the lower heat fluxes. The bubbles show an increase in size and number with heat flux. After this increasing trend, the bubble continues to grow larger when heat flux is higher than 80 kW/m2, eventually leading to the dryout at 117.5 kW/m2. The later bubble growth at high heat fluxes is caused primarily by the coalescences of neighboring bubbles. These larger bubbles are more affected by flow induced drag forces and move downstream. This can be seen in the lower sequential series at 100 kW/m2. The larger vapor masses slide across the surface, continue to absorb smaller bubbles as they move downstream, and are swept off the surface.

Copyright (c) 2017 by ASME
This article is only available in the PDF format.





Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In