Sets of high-pressure ejection experiment were conducted to investigate the implementing of gases ejector with high-pressure condition. Numerical simulation was used to extend the study and overcome the limit of experiment facilities. Experiment shows that ejection coefficient of gases ejector was not sensitive to supply gas pressure changes. But which was affected greatly by backpressure in mixing cavity of ejector, as shown by simulation. The simulation result also implies that there are inherent relation between ejection coefficient, area ratio at inlet of mixing cavity and pressure different between supply gas pressure and the backpressure. And the relationship determines that in some range, the implementing of gas ejector was unstable.
Skip Nav Destination
International Joint Power Generation Conference collocated with TurboExpo 2003
June 16–19, 2003
Atlanta, Georgia, USA
Conference Sponsors:
- Power Division
ISBN:
0-7918-3692-4
PROCEEDINGS PAPER
Experimental Investigation and Numerical Simulation of Gas Ejector in a Combustor With Combustion Gases Recirculation
Kumpeng Zhang,
Kumpeng Zhang
Harbin Engineering University, Harbin, Heilongjiang, P. R. China
Search for other works by this author on:
Weiming Pan,
Weiming Pan
MicroPower, Ltd., Shanghai, P. R. China
Search for other works by this author on:
Zhihua Fan
Zhihua Fan
MicroPower, Ltd., Shanghai, P. R. China
Search for other works by this author on:
Kumpeng Zhang
Harbin Engineering University, Harbin, Heilongjiang, P. R. China
Fei Xue
MicroPower, Ltd., Shanghai, P. R. China
Weiming Pan
MicroPower, Ltd., Shanghai, P. R. China
Zhihua Fan
MicroPower, Ltd., Shanghai, P. R. China
Paper No:
IJPGC2003-40101, pp. 743-747; 5 pages
Published Online:
December 17, 2008
Citation
Zhang, K, Xue, F, Pan, W, & Fan, Z. "Experimental Investigation and Numerical Simulation of Gas Ejector in a Combustor With Combustion Gases Recirculation." Proceedings of the International Joint Power Generation Conference collocated with TurboExpo 2003. 2003 International Joint Power Generation Conference. Atlanta, Georgia, USA. June 16–19, 2003. pp. 743-747. ASME. https://doi.org/10.1115/IJPGC2003-40101
Download citation file:
5
Views
Related Proceedings Papers
Related Articles
New Iterative Scheme in Computer Simulation of Positive Displacement Compressors Considering the Effect of Gas Pulsations
J. Mech. Des (June,2001)
Effect of Pressure on Second-Generation Pressurized Fluidized Bed Combustion Plants
J. Eng. Gas Turbines Power (April,1994)
Implicit Numerical Model of a High-Pressure Injection System
J. Eng. Gas Turbines Power (July,1992)
Related Chapters
Combined Cycle Power Plant
Energy and Power Generation Handbook: Established and Emerging Technologies
An Equation of State Tabulation Approach for Injectors with Non-Condensable Gases: Development and Analysis
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Study on Weld-Line Movement of TWBs with Different Thickness in Hydro-Forming Deep Drawing of Square Cup
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)