A linear model for the bending-bending-torsional-axial vibration of a spinning cantilever beam with a rigid body attached at its free end is derived using Hamilton's principle. The rotation axis is perpendicular to the beam (as for a helicopter blade, for example). The equations split into two uncoupled groups: coupled bending in the direction of the rotation axis with torsional motions and coupled bending in the plane of rotation with axial motions. Comparisons are made to existing models in the literature and some models are corrected. The practically important first case is examined in detail. The governing equations of motion are cast in a structured way using extended variables and extended operators. With this structure the equations represent a classical gyroscopic system and Galerkin discretization is readily applied where it is not for the original problem. The natural frequencies, vibration modes, stability, and bending-torsion coupling are investigated, including comparisons with past research.
Skip Nav Destination
Article navigation
Research-Article
Vibration of Spinning Cantilever Beams With an Attached Rigid Body Undergoing Bending-Bending-Torsional-Axial Motions
Christopher G. Cooley,
Christopher G. Cooley
1
University of Michigan-Shanghai,
Jiao Tong University Joint Institute,
e-mail: cooley.168@osu.edu
Jiao Tong University Joint Institute,
Shanghai Jiao Tong University
,Shanghai 200240
, China
e-mail: cooley.168@osu.edu
1Corresponding author.
Search for other works by this author on:
Robert G. Parker
Robert G. Parker
L. S. Randolph Professor and Head
Department of Mechanical Engineering,
Department of Mechanical Engineering,
Virginia Tech
,Blacksburg, VA 24061
Search for other works by this author on:
Christopher G. Cooley
University of Michigan-Shanghai,
Jiao Tong University Joint Institute,
e-mail: cooley.168@osu.edu
Jiao Tong University Joint Institute,
Shanghai Jiao Tong University
,Shanghai 200240
, China
e-mail: cooley.168@osu.edu
Robert G. Parker
L. S. Randolph Professor and Head
Department of Mechanical Engineering,
Department of Mechanical Engineering,
Virginia Tech
,Blacksburg, VA 24061
1Corresponding author.
Manuscript received December 22, 2012; final manuscript received October 1, 2013; accepted manuscript posted October 22, 2013; published online December 10, 2013. Assoc. Editor: Wei-Chau Xie.
J. Appl. Mech. May 2014, 81(5): 051002 (11 pages)
Published Online: December 10, 2013
Article history
Received:
December 22, 2012
Revision Received:
October 1, 2013
Accepted:
October 22, 2013
Citation
Cooley, C. G., and Parker, R. G. (December 10, 2013). "Vibration of Spinning Cantilever Beams With an Attached Rigid Body Undergoing Bending-Bending-Torsional-Axial Motions." ASME. J. Appl. Mech. May 2014; 81(5): 051002. https://doi.org/10.1115/1.4025791
Download citation file:
Get Email Alerts
Modeling the Dynamic Response of a Light-Driven Liquid Crystal Elastomer Fiber/Baffle/Spring-Coupled System
J. Appl. Mech (December 2024)
Why Biological Cells Cannot Stay Spherical?
J. Appl. Mech (December 2024)
Programmable Supratransmission in a Mechanical Chain with Tristable Oscillators
J. Appl. Mech (December 2024)
Adhesion of a Rigid Sphere to a Freestanding Elastic Membrane With Pre-Tension
J. Appl. Mech (December 2024)
Related Articles
A Simple Shear and Torsion-Free Beam Model for Multibody Dynamics
J. Comput. Nonlinear Dynam (September,2017)
Combined Torsional-Bending-Axial Dynamics of a Twisted Rotating Cantilever Timoshenko Beam With Contact-Impact Loads at the Free End
J. Appl. Mech (May,2007)
Free Response of Twisted Plates with Fixed Support Separation
J. Vib. Acoust (April,2001)
Model-Order Reduction of Flexible Multibody Dynamics Via Free-Interface Component Mode Synthesis Method
J. Comput. Nonlinear Dynam (October,2020)
Related Proceedings Papers
Related Chapters
Basic Concepts
Design & Analysis of ASME Boiler and Pressure Vessel Components in the Creep Range
A Utility Perspective of Wind Energy
Wind Turbine Technology: Fundamental Concepts in Wind Turbine Engineering, Second Edition
Verifying of a Network Cryptographic Protocol Using the Model Checking Tools
International Conference on Software Technology and Engineering (ICSTE 2012)