Abstract
As a type of architectured material, knitted textiles exhibit global mechanical behavior which is affected by their microstructure defined at the scale at which yarns are arranged topologically given the type of textile manufactured. To relate local geometrical, interfacial, material, kinematic and kinetic properties to global mechanical behavior, a first-order, two-scale homogenization scheme was developed and applied in this investigation. In this approach, the equivalent stress at the far field and the consistent material stiffness are explicitly derived from the microstructure. In addition, the macrofield is linked to the microstructural properties by a user subroutine which can compute stresses and stiffness in a looped finite element (FE) code. This multiscale homogenization scheme is computationally efficient and capable of predicting the mechanical behavior at the macroscopic level while accounting directly for the deformation-induced evolution of the underlying microstructure.
References
1.
Bedeloglu
, A. C.
, Koeppe
, R.
, Demir
, A.
, Bozkurt
, Y.
, and Sariciftci
, N. S.
, 2010
, “Development of Energy Generating Photovoltaic Textile Structures for Smart Applications
,” Fibers Polym.
, 11
(3
), pp. 378
–383
. 10.1007/s12221-010-0378-02.
Lee
, S.
, Lee
, Y.
, Park
, J.
, and Choi
, D.
, 2014
, “Stitchable Organic Photovoltaic Cells With Textile Electrodes
,” Nano Energy
, 9
, pp. 88
–93
. 10.1016/j.nanoen.2014.06.0173.
Carpi
, F.
, and Rossi
, D. D.
, 2005
, “Electroactive Polymer-Based Devices for E-Textiles in Biomedicine
,” IEEE Trans. Inf. Technol. Biomed.
, 9
(3
), pp. 295
–318
. 10.1109/TITB.2005.8545144.
Shim
, B. S.
, Chen
, W.
, Doty
, C.
, Xu
, C.
, and Kotov
, N. A.
, 2008
, “Smart Electronic Yarns and Wearable Fabrics for Human Biomonitoring Made by Carbon Nanotube Coating With Polyelectrolytes
,” Nano Lett.
, 8
(12
), pp. 4151
–4157
. 10.1021/nl801495p5.
Amjadi
, M.
, Kyung
, K.-U.
, Park
, I.
, and Sitti
, M.
, 2016
, “Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
,” Adv. Funct. Mater.
, 26
(11
), pp. 1678
–1698
. 10.1002/adfm.2015047556.
Juan
, X.
, Hairu
, L.
, and Menghe
, M.
, 2016
, “High Sensitivity Knitted Fabric Strain Sensors
,” Smart Mater. Struct.
, 25
(10
), p. 105008
. 10.1088/0964-1726/25/10/1050087.
Komeili
, M.
, and Milani
, A.
, 2012
, “The Effect of Meso-Level Uncertainties on the Mechanical Response of Woven Fabric Composites Under Axial Loading
,” Comput. Struct.
, 90–91
, pp. 163
–171
. 10.1016/j.compstruc.2011.09.0018.
Liu
, D.
, Christe
, D.
, Shakibajahromi
, B.
, Knittel
, C.
, Castaneda
, N.
, Breen
, D.
, Dion
, G.
, and Kontsos
, A.
, 2017
, “On the Role of Material Architecture in the Mechanical Behavior of Knitted Textiles
,” Int. J. Solids Struct.
, 109
, pp. 101
–111
. 10.1016/j.ijsolstr.2017.01.0119.
McKee
, P. J.
, Sokolow
, A. C.
, Yu
, J. H.
, Long
, L. L.
, and Wetzel
, E. D.
, 2017
, “Finite Element Simulation of Ballistic Impact on Single Jersey Knit Fabric
,” Compos. Struct.
, 162
(Suppl. C
), pp. 98
–107
. 10.1016/j.compstruct.2016.11.08610.
Duan
, Y.
, Keefe
, M.
, Bogetti
, T.
, and Cheeseman
, B.
, 2005
, “Modeling the Role of Friction During Ballistic Impact of a High-Strength Plain-Weave Fabric
,” Compos. Struct.
, 68
(3
), pp. 331
–337
. 10.1016/j.compstruct.2004.03.02611.
Rao
, M.
, Duan
, Y.
, Keefe
, M.
, Powers
, B.
, and Bogetti
, T.
, 2009
, “Modeling the Effects of Yarn Material Properties and Friction on the Ballistic Impact of a Plain-Weave Fabric
,” Compos. Struct.
, 89
(4
), pp. 556
–566
. 10.1016/j.compstruct.2008.11.01212.
Duan
, Y.
, Keefe
, M.
, Bogetti
, T.
, Cheeseman
, B.
, and Powers
, B.
, 2006
, “A Numerical Investigation of the Influence of Friction on Energy Absorption by a High-Strength Fabric Subjected to Ballistic Impact
,” Int. J. Impact Eng.
, 32
(8
), pp. 1299
–1312
. 10.1016/j.ijimpeng.2004.11.00513.
Liu
, D.
, Koric
, S.
, and Kontsos
, A.
, 2018
, “Parallelized Finite Element Analysis of Knitted Textile Mechanical Behavior
,” ASME J. Eng. Mater. Technol.
, 141
(2
), p. 021008
. 10.1115/1.404186914.
Liu
, D.
, Shakibajahromi
, B.
, Dion
, G.
, Breen
, D.
, and Kontsos
, A.
, 2018
, “A Computational Approach to Model Interfacial Effects on the Mechanical Behavior of Knitted Textiles
,” ASME J. Appl. Mech.
, 85
(4
), p. 041007
. 10.1115/1.403904615.
Samadi
, R.
, and Robitaille
, F.
, 2014
, “Particle-Based Modeling of the Compaction of Fiber Yarns and Woven Textiles
,” Text. Res. J.
, 84
(11
), pp. 1159
–1173
. 10.1177/004051751247020016.
Wang
, Y.
, and Sun
, X.
, 2001
, “Digital-Element Simulation of Textile Processes
,” Compos. Sci. Technol.
, 61
(2
), pp. 311
–319
. 10.1016/S0266-3538(00)00223-217.
Nocent
, O.
, Nourrit
, J.-M.
, and Rémion
, Y.
, Towards Mechanical Level of Detail for Knitwear Simulation
. Winter School in Computer Graphics and Visualization 2001 (WSCG2001)
, At Plzen
, Feb. 5–9
, pp. 252
–259
.18.
Nadler
, B.
, Papadopoulos
, P.
, and Steigmann
, D. J.
, 2006
, “Multiscale Constitutive Modeling and Numerical Simulation of Fabric Material
,” Int. J. Solids Struct.
, 43
(2
), pp. 206
–221
. 10.1016/j.ijsolstr.2005.05.02019.
Yeoman
, M. S.
, Reddy
, D.
, Bowles
, H. C.
, Bezuidenhout
, D.
, Zilla
, P.
, and Franz
, T.
, 2010
, “A Constitutive Model for the Warp-Weft Coupled Non-Linear Behavior of Knitted Biomedical Textiles
,” Biomaterials
, 31
(32
), pp. 8484
–8493
. 10.1016/j.biomaterials.2010.07.03320.
Carvelli
, V.
, Corazza
, C.
, and Poggi
, C.
, 2008
, “Mechanical Modelling of Monofilament Technical Textiles
,” Comput. Mater. Sci.
, 42
(4
), pp. 679
–691
. 10.1016/j.commatsci.2007.10.00321.
Fillep
, S.
, Mergheim
, J.
, and Steinmann
, P.
, 2017
, “Towards an Efficient Two-Scale Approach to Model Technical Textiles
,” Comput. Mech.
, 59
(3
), pp. 385
–401
. 10.1007/s00466-016-1354-322.
Vassiliadis
, S. G.
, Kallivretaki
, A. E.
, and Provatidis
, C. G.
, 2007
, “Mechanical Simulation of the Plain Weft Knitted Fabrics
,” Int. J. Clothing Sci. Technol.
, 19
(2
), pp. 109
–130
. 10.1108/0955622071072571123.
Lin
, H.
, Clifford
, M. J.
, Long
, A. C.
, and Sherburn
, M.
, 2009
, “Finite Element Modelling of Fabric Shear
,” Modell. Simul. Mater. Sci. Eng.
, 17
(1
), p. 015008
. 10.1088/0965-0393/17/1/01500824.
Gasser
, A.
, Boisse
, P.
, and Hanklar
, S.
, 2000
, “Mechanical Behaviour of Dry Fabric Reinforcements. 3D Simulations Versus Biaxial Tests
,” Comput. Mater. Sci.
, 17
(1
), pp. 7
–20
. 10.1016/S0927-0256(99)00086-525.
Dinh
, T. D.
, Weeger
, O.
, Kaijima
, S.
, and Yeung
, S. K.
, 2018
, “Prediction of Mechanical Properties of Knitted Fabrics Under Tensile and Shear Loading: Mesoscale Analysis Using Representative Unit Cells and Its Validation
,” Compos. Part B: Eng.
, 148
, pp. 81
–92
. 10.1016/j.compositesb.2018.04.05226.
Geers
, M.
, Coenen
, E.
, and Kouznetsova
, V.
, 2007
, “Multi-Scale Computational Homogenization of Structured Thin Sheets
,” Modell. Simul. Mater. Sci. Eng.
, 15
(4
), p. S393
. 10.1088/0965-0393/15/4/S0627.
Coenen
, E.
, Kouznetsova
, V. G.
, and Geers
, M. G. D.
, 2010
, “Computational Homogenization for Heterogeneous Thin Sheets
,” Int. J. Numer. Methods Eng.
, 83
(8–9
), pp. 1180
–1205
. 10.1002/nme.283328.
Fillep
, S.
, Mergheim
, J.
, and Steinmann
, P.
, 2013
, “Computational Modelling and Homogenization of Technical Textiles
,” Eng. Struct.
, 50
, pp. 68
–73
. 10.1016/j.engstruct.2013.01.02529.
Green
, S. D.
, Matveev
, M. Y.
, Long
, A. C.
, Ivanov
, D.
, and Hallett
, S. R.
, 2014
, “Mechanical Modelling of 3D Woven Composites Considering Realistic Unit Cell Geometry
,” Compos. Struct.
, 118
, pp. 284
–293
. 10.1016/j.compstruct.2014.07.00530.
Fillep
, S.
, Mergheim
, J.
, and Steinmann
, P.
, 2015
, “Computational Homogenization of Rope-Like Technical Textiles
,” Comput. Mech.
, 55
(3
), pp. 577
–590
. 10.1007/s00466-015-1124-731.
Rahali
, Y.
, Goda
, I.
, and Ganghoffer
, J. F.
, 2016
, “Numerical Identification of Classical and Nonclassical Moduli of 3D Woven Textiles and Analysis of Scale Effects
,” Compos. Struct.
, 135
, pp. 122
–139
. 10.1016/j.compstruct.2015.09.02332.
Hill
, R.
, 1965
, “Continuum Micro-Mechanics of Elastoplastic Polycrystals
,” J. Mech. Phys. Solids
, 13
(2
), pp. 89
–101
. 10.1016/0022-5096(65)90023-233.
Hill
, R.
, 1963
, “Elastic Properties of Reinforced Solids: Some Theoretical Principles
,” J. Mech. Phys. Solids
, 11
(5
), pp. 357
–372
. 10.1016/0022-5096(63)90036-X34.
Suquet
, P.
, 1987
, “Elements of Homogenization for Inelastic Solid Mechanics
,” Homogenization Tech. Compos. Media
, 272
, pp. 193
–278
. 10.1007/3-540-17616-0_1535.
Resnick
, A.
, 2012
, “Continuum Mechanics and Thermodynamics: From Fundamental Concepts to Governing Equations,” Contemporary Physics
, E. B.
Tadmor
, R. E.
Miller
, and R. S.
Elliott
, eds., Cambridge University Press
, Cambridge
, Vol. 53
, pp. 445
–456
.36.
Bianchetti
, R.
, Hamstad
, M.
, and Mukherjee
, A.
, 1976
, “Origin of Burst-Type Acoustic Emission in Unflawed 7075-T6 Aluminum
,” J. Test. Eval.
, 4
(5
), pp. 313
–318
. 10.1520/JTE10518J37.
ABAQUS
, Version 6.13, 2013, User’s Manual
, Dassault Systems
, Pawtucket, RI
.Copyright © 2019 by ASME
You do not currently have access to this content.
