Skip Nav Destination
Issues
September 1963
ISSN 0021-8936
EISSN 1528-9036
In this Issue
Research Papers
On the Mechanical Behavior of Viscoelastic/Plastic Solids
J. Appl. Mech. September 1963, 30(3): 321–328.
doi: https://doi.org/10.1115/1.3636556
Topics:
Mechanical behavior
,
Solids
,
Stress
,
Viscoelasticity
,
Constitutive equations
,
Corners (Structural elements)
,
Creep
,
Plasticity
,
Shapes
A Study of the Vibrations of Shallow Spherical Shells
J. Appl. Mech. September 1963, 30(3): 329–334.
doi: https://doi.org/10.1115/1.3636557
Topics:
Shallow spherical shells
,
Vibration
,
Displacement
,
Shells
,
Boundary-value problems
,
Computers
,
Steel
Stresses in a Linear Incompressible Viscoelastic Cylinder With Moving Inner Boundary
J. Appl. Mech. September 1963, 30(3): 335–341.
doi: https://doi.org/10.1115/1.3636558
Topics:
Cylinders
,
Stress
,
Pressure
,
Computation
,
Computers
,
Plane strain
,
Shells
,
Stress-strain relations
Force Singularities of Shallow Cylindrical Shells
J. Appl. Mech. September 1963, 30(3): 342–346.
doi: https://doi.org/10.1115/1.3636559
Topics:
Circular cylindrical shells
,
Pipes
Longitudinal Impact of a Semi-Infinite Elastic Cylindrical Shell
J. Appl. Mech. September 1963, 30(3): 347–354.
doi: https://doi.org/10.1115/1.3636560
Vibration of an Infinitely Extending Plate Resting on an Elastic Foundation
J. Appl. Mech. September 1963, 30(3): 355–362.
doi: https://doi.org/10.1115/1.3636561
Topics:
Vibration
,
Free vibrations
,
Impulse (Physics)
,
Oscillations
Buckling of Simply Supported Oblique Plates
J. Appl. Mech. September 1963, 30(3): 363–366.
doi: https://doi.org/10.1115/1.3636562
Topics:
Buckling
,
Plates (structures)
,
Compression
,
Shear (Mechanics)
,
Shells
,
Stress
On the Parametric Excitation of a Dynamic System Having Multiple Degrees of Freedom
J. Appl. Mech. September 1963, 30(3): 367–372.
doi: https://doi.org/10.1115/1.3636563
Topics:
Degrees of freedom
,
Dynamic systems
,
Excitation
,
Approximation
,
Differential equations
On the Accuracy of the Bernoulli-Euler Theory for Beams of Variable Section
J. Appl. Mech. September 1963, 30(3): 373–378.
doi: https://doi.org/10.1115/1.3636564
Topics:
Deflection
,
Strength (Materials)
,
Stress
Analysis of the Motion of a Flexible Shaft Inside a Guide Tube
J. Appl. Mech. September 1963, 30(3): 379–383.
doi: https://doi.org/10.1115/1.3636565
Topics:
Clearances (Engineering)
,
Displacement
,
Torque
,
Wire
Ballistic Perforation Dynamics
J. Appl. Mech. September 1963, 30(3): 384–390.
doi: https://doi.org/10.1115/1.3636566
Topics:
Dynamics (Mechanics)
,
Plates (structures)
,
Waves
Crushing of a Tube Between Rigid Plates
J. Appl. Mech. September 1963, 30(3): 391–395.
doi: https://doi.org/10.1115/1.3636567
Topics:
Plates (structures)
,
Stress
,
Deformation
,
Geometry
,
Load bearing capacity
,
Shear (Mechanics)
Interaction of Pressure, End Load, and Twisting Moment for a Rigid-Plastic Circular Tube
J. Appl. Mech. September 1963, 30(3): 396–400.
doi: https://doi.org/10.1115/1.3636568
Topics:
Pressure
,
Stress
,
Circular cylinders
,
Flow (Dynamics)
,
Plastics
,
Shells
Plastic Instability of Cylindrical Shells With Rigid End Closures
J. Appl. Mech. September 1963, 30(3): 401–409.
doi: https://doi.org/10.1115/1.3636569
Topics:
Deformation
,
Flow (Dynamics)
,
Hardening
,
Membranes
,
Pipes
,
Pressure
,
Shapes
,
Shells
Application of Numerical Mapping to the Muskhelishvili Method in Plane Elasticity
J. Appl. Mech. September 1963, 30(3): 410–414.
doi: https://doi.org/10.1115/1.3636570
Topics:
Elasticity
,
Computers
Extension of a Method of Solution for Poisson’s Equation
J. Appl. Mech. September 1963, 30(3): 415–418.
doi: https://doi.org/10.1115/1.3636571
Topics:
Poisson equation
,
Fluids
Strength of Stress Singularities at Crack Tips for Flexural and Torsional Problems
J. Appl. Mech. September 1963, 30(3): 419–425.
doi: https://doi.org/10.1115/1.3636572
Topics:
Fracture (Materials)
,
Stress singularity
,
Bending (Stress)
,
Shear stress
,
Stress
,
Surface cracks
,
Torsion
On the Choice of Coordinates Used to Describe Thermoelectric and Thermomagnetic Generators
J. Appl. Mech. September 1963, 30(3): 426–429.
doi: https://doi.org/10.1115/1.3636573
Topics:
Generators
,
Energy dissipation
,
Heat conduction
,
Heating
,
Temperature
A Comparison of Five Methods of Calculating Aerodynamic Stagnation-Point Heat Transfer at Velocities of 25,000 to 40,000 fps
J. Appl. Mech. September 1963, 30(3): 430–434.
doi: https://doi.org/10.1115/1.3636574
Topics:
Heat transfer
,
Enthalpy
,
Flow (Dynamics)
,
Uncertainty
,
Equilibrium (Physics)
Theory of Flexible Aerodynamic Surfaces
J. Appl. Mech. September 1963, 30(3): 435–442.
doi: https://doi.org/10.1115/1.3636575
Topics:
Airfoils
,
Boundary layers
,
Chords (Trusses)
,
Drag (Fluid dynamics)
,
Eigenvalues
,
Porosity
,
Pressure
,
Separation (Technology)
,
Shapes
,
Tension
Taylor Instability of a Liquid Film Around a Long, Horizontal, Circular Cylindrical Body in Still Air
J. Appl. Mech. September 1963, 30(3): 443–447.
doi: https://doi.org/10.1115/1.3636576
Topics:
Liquid films
,
Cylinders
,
Waves
,
Surface tension
,
Drops
Graphical Solution of Quasi-One-Dimensional Foam Flows
J. Appl. Mech. September 1963, 30(3): 448–452.
doi: https://doi.org/10.1115/1.3636577
Topics:
Flow (Dynamics)
,
Compressibility
,
Density
,
Mach number
,
Approximation
,
Computation
,
Ducts
Steady-State Flow of a Gelling Material Between Rotating Concentric Cylinders
J. Appl. Mech. September 1963, 30(3): 453–460.
doi: https://doi.org/10.1115/1.3636578
Topics:
Cylinders
,
Flow (Dynamics)
,
Steady state
,
Accounting
,
Constitutive equations
,
Rotation
,
Stiffness
,
Thixotropy
Technical Briefs
Upper and Lower Bounds for the Average Deflection of Elastic Plates
J. Appl. Mech. September 1963, 30(3): 461–463.
doi: https://doi.org/10.1115/1.3636579
Topics:
Deflection
,
Elastic plates
Critical Speed Damper
J. Appl. Mech. September 1963, 30(3): 463–464.
doi: https://doi.org/10.1115/1.3636580
Topics:
Dampers
,
Journal bearings
,
Damping
,
Deflection
,
Bearings
,
Stress
,
Yaw
The Ribbed Circular Plate
J. Appl. Mech. September 1963, 30(3): 464–466.
doi: https://doi.org/10.1115/1.3636581
Minimum Deflection Design of a Uniformly Accelerating Cantilever Beam
J. Appl. Mech. September 1963, 30(3): 466–467.
doi: https://doi.org/10.1115/1.3636582
Topics:
Cantilever beams
,
Deflection
,
Design
The Determination of Moduli of Anisotropic Plates
J. Appl. Mech. September 1963, 30(3): 467–468.
doi: https://doi.org/10.1115/1.3636583
Topics:
Anisotropy
,
Plates (structures)
Nonlinear Deformation of a Curved Shaft Due to Torque
J. Appl. Mech. September 1963, 30(3): 468–471.
doi: https://doi.org/10.1115/1.3636584
Topics:
Deformation
,
Torque
Discussions
Discussion: “Large-Deflection Analysis of Buckling of a Cylinder Under Bending” (Yao, J. C., 1962, ASME J. Appl. Mech., 29, pp. 708–714)
J. Appl. Mech. September 1963, 30(3): 472–473.
doi: https://doi.org/10.1115/1.3636585
Topics:
Buckling
,
Cylinders
,
Deflection
Closure to “Discussion of ‘Large-Deflection Analysis of Buckling of a Cylinder Under Bending’” (1963, ASME J. Appl. Mech., 30, pp. 472–473)
J. Appl. Mech. September 1963, 30(3): 473.
doi: https://doi.org/10.1115/1.3636586
Topics:
Buckling
,
Cylinders
,
Deflection
Discussion: “Finite Deformations of a Rigid Perfectly Plastic Arch” (Onat, E. T., and Shu, L. S., 1962, ASME J. Appl. Mech., 29, pp. 549–553)
J. Appl. Mech. September 1963, 30(3): 473.
doi: https://doi.org/10.1115/1.3636587
Topics:
Arches
,
Deformation
Closure to “Discussion of ‘Finite Deformations of a Rigid Perfectly Plastic Arch’” (1963, ASME J. Appl. Mech., 30, p. 473)
J. Appl. Mech. September 1963, 30(3): 474.
doi: https://doi.org/10.1115/1.3636588
Topics:
Deformation
Discussion: “The Effect of Spacewise Lumping on the Solution Accuracy of the One-Dimensional Diffusion Equation” (Murray, W. D., and Landis, Fred, 1962, ASME J. Appl. Mech., 29, pp. 629–636)
J. Appl. Mech. September 1963, 30(3): 474–475.
doi: https://doi.org/10.1115/1.3636589
Topics:
Diffusion (Physics)
Closure to “Discussion of ‘The Effect of Spacewise Lumping on the Solution Accuracy of the One-Dimensional Diffusion Equation’” (1963, ASME J. Appl. Mech., 30, pp. 474–475)
J. Appl. Mech. September 1963, 30(3): 475.
doi: https://doi.org/10.1115/1.3636590
Topics:
Diffusion (Physics)
Discussion: “Crack-Extension Force for a Part-Through Crack in a Plate” (Irwin, G. R., 1962, ASME J. Appl. Mech., 29, pp. 651–654)
J. Appl. Mech. September 1963, 30(3): 475–476.
doi: https://doi.org/10.1115/1.3636591
Topics:
Fracture (Materials)
Closure to “Discussion of ‘Crack-Extension Force for a Part-Through Crack in a Plate’” (1963, ASME J. Appl. Mech., 30, pp. 475–476)
J. Appl. Mech. September 1963, 30(3): 476.
doi: https://doi.org/10.1115/1.3636592
Topics:
Fracture (Materials)
Discussion: “An Experimental Determination of the Minimum Reynolds Number for Instability in a Free Jet” (Viilu, Andrus, 1962, ASME J. Appl. Mech., 29, pp. 506–508)
J. Appl. Mech. September 1963, 30(3): 476–477.
doi: https://doi.org/10.1115/1.3636593
Topics:
Reynolds number
Closure to “Discussion of ‘An Experimental Determination of the Minimum Reynolds Number for Instability in a Free Jet’” (1963, ASME J. Appl. Mech., 30, pp. 476–477)
J. Appl. Mech. September 1963, 30(3): 477.
doi: https://doi.org/10.1115/1.3636594
Topics:
Reynolds number
Discussion: “Harmonic Analysis of Spherical Four-Bar Mechanisms” (Yang, A. T., 1962, ASME J. Appl. Mech., 29, pp. 683–688)
J. Appl. Mech. September 1963, 30(3): 477.
doi: https://doi.org/10.1115/1.3636595
Closure to “Discussion of ‘Harmonic Analysis of Spherical Four-Bar Mechanisms’” (1963, ASME J. Appl. Mech., 30, p. 477)
J. Appl. Mech. September 1963, 30(3): 477.
doi: https://doi.org/10.1115/1.3636596
Discussion: “Dynamics of a Vehicle Containing Moving Parts” (Grubin, Carl, 1962, ASME J. Appl. Mech., 29, pp. 486–488)
J. Appl. Mech. September 1963, 30(3): 477.
doi: https://doi.org/10.1115/1.3636597
Topics:
Dynamics (Mechanics)
,
Vehicles
Closure to “Discussion of ‘Dynamics of a Vehicle Containing Moving Parts’” (1963, ASME J. Appl. Mech., 30, p. 477)
J. Appl. Mech. September 1963, 30(3): 477–478.
doi: https://doi.org/10.1115/1.3636598
Topics:
Dynamics (Mechanics)
,
Vehicles
Discussion: “Minimum-Weight Proportions of Pressure-Vessel Heads” (Hoffman, G. A., 1962, ASME J. Appl. Mech., 29, pp. 662–668)
J. Appl. Mech. September 1963, 30(3): 478.
doi: https://doi.org/10.1115/1.3636599
Topics:
Pressure vessels
,
Weight (Mass)
Closure to “Discussion of ‘Minimum-Weight Proportions of Pressure-Vessel Heads’” (1963, ASME J. Appl. Mech., 30, p. 478)
J. Appl. Mech. September 1963, 30(3): 478.
doi: https://doi.org/10.1115/1.3636600
Topics:
Pressure vessels
,
Weight (Mass)
Book Reviews
Kriechfestigkeit metallischer Werkstoffe (The Strength of Metals in the Presence of Creep)
J. Appl. Mech. September 1963, 30(3): 478–479.
doi: https://doi.org/10.1115/1.3636601
An Introduction to the Theory of Stationary Random Functions
J. Appl. Mech. September 1963, 30(3): 479.
doi: https://doi.org/10.1115/1.3636602
Theory of Elastic Thin Shells
J. Appl. Mech. September 1963, 30(3): 479.
doi: https://doi.org/10.1115/1.3636603
Topics:
Thin shells
The Mechanical Properties of Metals
J. Appl. Mech. September 1963, 30(3): 479.
doi: https://doi.org/10.1115/1.3636604
Topics:
Mechanical properties
,
Metals
Gear Load Capacity
J. Appl. Mech. September 1963, 30(3): 479–480.
doi: https://doi.org/10.1115/1.3636605
Email alerts
RSS Feeds
Modeling the Dynamic Response of a Light-Driven Liquid Crystal Elastomer Fiber/Baffle/Spring-Coupled System
J. Appl. Mech (December 2024)
Why Biological Cells Cannot Stay Spherical?
J. Appl. Mech (December 2024)
Programmable Supratransmission in a Mechanical Chain with Tristable Oscillators
J. Appl. Mech (December 2024)
Adhesion of a Rigid Sphere to a Freestanding Elastic Membrane With Pre-Tension
J. Appl. Mech (December 2024)
