Abstract
The general theory of elastic stability invented by Koiter (1945, “On the Stability of Elastic Equilibrium,” Ph.D. thesis, Delft, Holland) motivated the development of a series of asymptotic approaches to deal with the initial postbuckling behavior of structures. These approaches, which played a pivotal role in the precomputer age, are somewhat overshadowed by the progress of computational environment. Recently, the importance of the asymptotic approaches has been revived through the extension of their theoretical background and the combination with the framework of finite element method and with group-theoretic bifurcation theory in nonlinear mathematics. The approaches serve as an efficient and insightful strategy to tackle probabilistic scatter of critical loads. We review, through the perspective of theoretical engineers, the historical development and recent revival of the asymptotic approaches for buckling of imperfection-sensitive structures and materials.
Issue Section:
Review Articles
References
1.
Euler
,
L.
,
1744, “Appendix, De
curvis elasticis
,” Methodus inveniendi lineas curvas
maximi minimive proprietate gaudentes
, Marcum
Michaelem Bousquet
, Lausanne,
Geneva
.2.
Poincaré
,
H.
,
1892–1899, Les méthodes
nouvelles de la mécanique céléste
,
Gauthier-Villars
,
Paris
, Vols.
1–3
.3.
Liapunov
, A.
M.
, Problème Général de la Stabilité du
Mouvement (in Russian), Karkov, 1892; French translation in Ann.
Fac. Sci. Univ. Toulose, 9, 1907; English translation:
Stability of Motion
, Academic
Press
, New York
,
1966.4.
Schmidt
,
E.
,
1910, “Zur Theorie der
linearen und nicht linearen Integralgleichungen
,”
Math. Ann.
0025-5831, 65
, p.
370
.5.
Flügge
,
W.
,
1932, “Die stabilität
der Kreiszylinderschale
,” Ing.-Arch.
0020-1154,
3
, pp.
463
–506
.6.
Donnel
, L.
H.
, 1934,
“A. New Theory for the Buckling of Thin Cylinders Under Axial
Compression and Bending
,” Trans. ASME
0097-6822, 56
, pp.
795
–806
.7.
von Kármán
,
T.
, and
Tsien
,
H.-S.
,
1939, “The Buckling of
Spherical Shells by External Pressure
,” J. Aeronaut.
Sci.
0095-9812, 1
, pp.
43
–50
.8.
Koiter
,
W. T.
, 1945,
“On the Stability of Elastic Equilibrium
,”
Ph.D. thesis, Delft, Holland; from English translation see
1967, NASA Technical Translation,
Report No. F10833.
9.
Chernyschenko
, S.
I.
, 1998,
“Asymptotic Theory of Global Separation
,”
Appl. Mech. Rev.
0003-6900, 51
(9
), pp.
523
–536
.10.
Andrianov
, I.
V.
, and Awrejcewicz
,
J.
,
2001, “New Trends in
Asymptotic Approaches: Summation and Interpolation Methods
,”
Appl. Mech. Rev.
0003-6900,
54
(1
), pp.
69
–92
.11.
Chillingworth
,
D.
,
1975, “The Catastrophe
of a Buckling Beam
,” Dynamical Systems
,
A.
Manning
, ed.,
Lecture Notes in Mathematics
, Vol. 468
,
Springer-Verlag
,
Berlin
.12.
Thom
,
R.
,
1975, Structural Stability and
Morohogenesis
, D. H. Fowler, trans.,
Benjamin
, Reading,
MA
.13.
Wassermann
,
G.
,
1976, “(r,s)-Stable
Unfoldings and Catastrophe Theory
,” Structural
Stability, the Theory of Catastrophes, and Applications in the
Sciences
, P.
Hilton
, ed.,
Lecture Notes in Mathematics
, Vol. 525
,
Springer-Verlag
,
Berlin
, pp.
253
–262
.14.
Zeeman
, E.
C.
, 1976,
“The Umbilic Bracelet and the Double-Cusp
Catastrophe
,” Structural Stability, the Theory of
Catastrophes, and Applications in the Sciences
, P.
Hilton
, ed.,
Lecture Notes in Mathematics
, Vol. 525
,
Springer-Verlag
,
Berlin
, pp.
328
–366
.15.
Poston
,
T.
, and
Stewart
,
I.
,
1978, Catastrophe Theory and
Its Applications
, Pitman
,
London
.16.
Thompson
, J. M.
T.
, 1982,
Instabilities and Catastrophes in Science and Engineering
,
Wiley (Interscience)
,
Chichester
.17.
Sattinger
, D.
H.
, 1979,
Group Theoretic Methods in Bifurcation Theory
,
Lecture Notes in Mathematics
, Vol. 762
,
Springer-Verlag
,
Berlin
.18.
Golubitsky
,
M.
,
Stewart
,
I.
, and
Schaeffer
, D.
G.
, 1988,
Singularities and Groups in Bifurcation Theory: Vol. 2
,
Applied Mathematical Sciences Series No. 69
,
Springer-Verlag
, New
York
.19.
20.
Ikeda
,
K.
, and
Murota
,
K.
,
2002, Imperfect Bifurcation in
Structures and Materials: Engineering Use of Group-Theoretic Bifurcation
Theory
, Applied Mathematics Sciences Series No.
149
, Springer-Verlag
,
New York
.21.
Ohsaki
,
M.
, and
Ikeda
,
K.
,
2007, Stability and
Optimization of Structures: Generalized Sensitivity Analysis
,
Mechanical Engineering Science
,
Springer-Verlag
, New
York
.22.
Ikeda
,
K.
,
Kitada
,
T.
,
Matsumura
,
M.
, and
Yamakawa
,
Y.
,
2007, “Imperfection
Sensitivity of Ultimate Buckling Strength of Elastic-Plastic Square Plates
Under Compression
,” Int. J. Non-Linear
Mech.
0020-7462, 42
, pp.
529
–541
.23.
Golubitsky
,
M.
, and
Schaeffer
, D.
G.
, 1985,
Singularities and Groups in Bifurcation Theory: Vol. 1
,
Applied Mathematical Science Series No. 51
,
Springer-Verlag
, New
York
.24.
Peek
,
R.
, and
Kheyrkhahan
,
M.
,
1993, “Postbuckling
Behavior and Imperfection Sensitivity of Elastic Structures by the
Lyapunov–Schmidt–Koiter Approach
,” Comput. Methods
Appl. Mech. Eng.
0045-7825, 108
(3–4
), pp.
261
–279
.25.
Thompson
, J. M.
T.
, and Hunt
, G.
W.
, 1973,
A General Theory of Elastic Stability
,
Wiley
, New
York
.26.
Koiter
, W.
T.
, 1963,
“The Effects of Axisymmetric Imperfections on the Buckling of
Cylindrical Shells Under Axial Compression
,” Proc.
K. Ned. Akad. Wet., Ser. B: Phys. Sci.
0023-3366, 66
, pp.
265
–279
.27.
Horton
, W.
H.
, and Durham
, S.
C.
, 1965,
“Imperfections: A Main Contributor to Scatter in Experimental
Values of Buckling Load
,” Int. J. Solids
Struct.
0020-7683, 1
(1
), pp.
59
–72
.28.
Thompson
, J. M.
T.
, 1965,
“Discrete Branching Points in the General Theory of Elastic
Stability
,” J. Mech. Phys. Solids
0022-5096, 13
(5
), pp.
295
–310
.29.
Ikeda
,
K.
, and
Murota
,
K.
,
1990, “Critical Initial
Imperfection of Structures
,” Int. J. Solids
Struct.
0020-7683,
26
(8
), pp.
865
–886
.30.
Ikeda
,
K.
, and
Murota
,
K.
,
1990, “Computation of
Critical Initial Imperfection of Truss Structures
,”
J. Eng. Mech.
0733-9399,
116
(10
), pp.
2101
–2117
.31.
Budiansky
,
B.
, and
Hutchinson
, J.
W.
, 1964,
“Dynamic Buckling of Imperfection-Sensitive
Structures
,” Proceedings of the 11th International
Congress of Applied Mechanics
, H.
Görtler
, ed.,
Munich
, pp.
636
–651
.32.
Hutchinson
, J.
W.
, and Amazigo
,
C.
,
1967,
“Imperfection-Sensitivity of Eccentrically Stiffened
Cylindrical Shells
,” AIAA J.
0001-1452, 5
(3
), pp.
392
–401
.33.
Hutchinson
, J.
W.
, and Koiter
, W.
T.
, 1970,
“Postbuckling Theory
,” Appl. Mech.
Rev.
0003-6900, 23
(12
), pp.
1353
–1366
.34.
Budiansky
,
B.
,
1974, Theory of Buckling and
Postbuckling Behavior of Elastic Structures
, Advances
Applied Mechanics
, Vol. 14
, C.
Yiu
, ed.,
Academic
, New
York
, pp.
1
–65
.35.
Pignataro
,
M.
,
Rizzi
,
N.
, and
Luongo
,
A.
,
1991, Stability, Bifurcation
and Postcritical Behaviour of Elastic Structures
,
Developments in Civil Engineering
, Vol.
39
, Elsevier
Amsterdam
.36.
Britvec
, S.
J.
, and Chilver
, A.
H.
, 1963,
“Elastic Buckling of Rigidly-Jointed Braced
Frames
,” J. Engrg. Mech. Div.
0044-7951, 89
(6
), pp.
217
–255
.37.
Roorda
,
J.
,
1968, “On the Buckling
of Symmetric Structural Systems With First and Second Order
Imperfections
,” Int. J. Solids Struct.
0020-7683, 4
(12
), pp.
1137
–1148
.38.
Sewell
, M.
J.
, 1965,
“The Static Perturbation Technique In Buckling
Problems
,” J. Mech. Phys. Solids
0022-5096, 13
(4
), pp.
247
–265
.39.
Thompson
, J. M.
T.
, 1969,
“A. General Theory for the Equilibrium and Stability of
Discrete Conservative Systems
,” Z. Angew. Math.
Phys.
0044-2275, 20
, pp.
797
–846
.40.
Chilver
, A.
H.
, 1967,
“Coupled Modes of Elastic Buckling
,”
J. Mech. Phys. Solids
0022-5096, 15
(1
), pp.
15
–28
.41.
Supple
, W.
J.
, 1967,
“Coupled Branching Configurations in the Elastic Buckling of
Symmetric Structural System
,” Int. J. Mech.
Sci.
0020-7403,
9
(2
), pp.
97
–112
.42.
Roorda
,
J.
,
1965, “Stability of
Structures With Small Imperfections
,” J. Engrg.
Mech. Div.
0044-7951, 91
, pp.
87
–106
.43.
Thompson
, J. M.
T.
, Tulk
, J.
D.
, and Walker
, A.
C.
, 1976,
“An Experimental Study of Imperfection-Sensitivity in the
Interactive Buckling of Stiffened Plates
,” Buckling
of Structures, Proceedings of the IUTAM Symposium on Buckling of
Structures
, Harvard University, Cambridge, MA, B.
Budiansky
, ed.,
Springer-Verlag
,
Berlin
, pp.
149
–159
.44.
Bellman
, R.
E.
, 1964,
Perturbation Techniques in Mathematics, Physics and
Engineering
, Holt, Rinehart and
Winston
, New
York
.45.
Keller
, J.
B.
, 1968,
Perturbation Theory
, Notes on a Series of Six
Lectures Presented at the Department of Mathematics
,
Michigan State University
,
East Lansing MI
.46.
Spunt
,
L.
,
1971, Optimum Structural
Design
, Prentice-Hall
,
Englewood Cliffs, NJ
.47.
Koiter
, W.
T.
, and Skaloud
,
M.
,
1963, “Interventions,
Comportment Postcritique des Plaques Utilisees en Construction
Metallique
,” Mem. Soc. R. Sci. Liege, Vol. Hors
Ser.
0560-5687, 8
(5
), pp.
64
–68
.48.
Thompson
, J. M.
T.
, and Supple
, W.
J.
, 1973,
“Erosion of Optimum Designs by Compound Branching
Phenomena
,” J. Mech. Phys. Solids
0022-5096, 21
(3
), pp.
135
–144
.49.
Thompson
, J. M.
T.
, and Hunt
, G.
W.
, 1974,
“Dangers of Structural Optimization
,”
Eng. Optimiz.
0305-215X, 1
, pp.
99
–110
.50.
Koiter
, W.
T.
, and Kuiken
, G.
D. C.
, 1971,
“The Interaction Between Local Buckling and Overall Buckling
in the Behavior of Built-Up Columns
,” Delft
University of Technology
, Report No. WTHD-23.51.
Byskov
,
E.
, and
Hutchinson
, J.
W.
, 1977,
“Mode Interaction in Axially Stiffened Cylindrical
Shells
,” AIAA J.
0001-1452, 15
(7
), pp.
941
–948
.52.
Ho
,
D.
,
1972, “The Influence of
Imperfections on Systems With Coincident Buckling Loads
,”
Int. J. Non-Linear Mech.
0020-7462, 7
, pp.
311
–321
.53.
Thompson
, J. M.
T.
, and Lewis
, G.
M.
, 1972,
“On the Optimum Design of Thin-Walled Compression
Members
,” J. Mech. Phys. Solids
0022-5096, 20
(2
), pp.
101
–109
.54.
Tvergaard
,
V.
,
1973, “Influence of
Post-Buckling Behaviour on Optimum Design of Stiffened
Panels
,” Int. J. Solids Struct.
0020-7683, 9
(12
), pp.
1519
–1534
.55.
Ohsaki
,
M.
,
2000, “Optimization of
Geometrically Non-Linear Symmetric Systems With Coincident Critical
Points
,” Int. J. Numer. Methods Eng.
0029-5981, 48
(9
), pp.
1345
–1357
.56.
Ohsaki
,
M.
,
2003, “Sensitivity
Analysis of an Optimized Bar-Spring Model With Hill-Top
Branching
,” Arch. Appl. Mech.
0939-1533, 73
, pp.
241
–251
.57.
Thompson
, J. M.
T.
, 1963,
“Basic Principles in The General Theory of Elastic
Stability
,” J. Mech. Phys. Solids
0022-5096, 11
(1
), pp.
13
–20
.58.
Sewell
,
M. J.
, 1968,
“A General Theory of Equilibrium Paths Through Critical
Points: Part I
,” Proc. R. Soc. London, Ser.
A
1364-5021, 306
, pp.
201
–223
; Sewell
,
M. J.
, 1968,
“A General Theory of Equilibrium Paths Through Critical
Points: Part II.
,” Proc. R. Soc. London, Ser.
A
1364-5021, 306
, pp.
225
–238
.59.
Thompson
, J. M.
T.
, and Hunt
, G.
W.
, 1975,
“Towards a Unified Bifurcation Theory
,”
Z. Angew. Math. Phys.
0044-2275,
26
, pp.
581
–603
.60.
Thompson
, J. M.
T.
, 1975,
“Experiments in Catastrophe
,” Nature
(London)
0028-0836, 254
, pp.
392
–395
.61.
Hui
,
D.
, and
Hansen
, J.
S.
, 1980,
“The Swallowtail and Butterfly Cuspoids and Their Application
in the Initial Post-Buckling of Single-Mode Structural
Systems
,” Q. Appl. Math.
0033-569X, 38
(1
), pp.
17
–36
.62.
Thompson
, J. M.
T.
, and Hunt
, G.
W.
, 1984,
Elastic Instability Phenomena
,
Wiley
,
Chichester
.63.
Thompson
, J. M.
T.
, and Schorrock
,
P. A.
, 1975,
“Bifurcation Instability of an Atomic
Lattice
,” J. Mech. Phys. Solids
0022-5096, 23
(1), pp.
21
–37
.64.
Hunt
, G.
W.
, 1977,
“Imperfection-Sensitivity of Semi-Symmetric
Branching
,” Proc. R. Soc. London, Ser. A
1364-5021, 357
, pp.
193
–211
.65.
Hunt
, G.
W.
, 1981,
“An Algorithm for the Nonlinear Analysis of Compound
Bifurcation
,” Philos. Trans. R. Soc. London, Ser.
A
0962-8428, 300
, pp.
443
–471
.66.
Huseyin
,
K.
, and
Mandadi
,
V.
,
1977, “On the
Imperfection Sensitivity of Compound Branching
,”
Ing.-Arch.
0020-1154, 46
,
213
–222
.67.
Hansen
, J.
S.
, 1977,
“Some Two-Mode Buckling Problems and Their Relations to
Catastrophe Theory
,” AIAA J.
0001-1452, 15
(1
), pp.
1638
–1644
.68.
Hui
,
D.
, and
Hansen
, J.
S.
, 1980,
“Two-Mode Buckling of an Elastically Supported Plate and Its
Relation to Catastrophe Theory
,” ASME J. Appl.
Mech.
0021-8936, 47
(4
), pp.
607
–612
.69.
Hui
,
D.
, and
Hansen
, J.
S.
, 1981,
“The Parabolic Umbilic Catastrophe and Its Application in the
Theory of Elastic Stability
,” Q. Appl.
Math.
0033-569X, 39
(2
), pp.
201
–220
.70.
Thompson
, J. M.
T.
, and Gaspar
,
Z.
,
1977, “A. Buckling Model
for the Set of Umbilic Catastrophes
,” Math. Proc.
Cambridge Philos. Soc.
0305-0041, 82
, pp.
497
–507
.71.
Samuels
,
P.
,
1979, “The Relationship
Between Postbuckling Behavior at Coincident Branching Points and the
Geometry of an Umbilic Point of the Energy Surface
,”
J. Struct. Mech.
0360-1218, 7
(3
), pp.
297
–324
.72.
Thompson
, J. M.
T.
, and Hunt
, G.
W.
, 1977,
“A Bifurcation Theory for the Instabilities of Optimization
and Design
,” Synthese
0039-7857,
36
, pp.
315
–351
.73.
Hui
,
D.
,
1986,
“Imperfection-Sensitivity of Elastically Supported Beams and
Its Relation to the Double-Cusp Instability Model
,”
Proc. R. Soc. London, Ser. A
1364-5021, 405
, pp.
143
–158
.74.
Arbocz
,
J.
, and
Hol
, J. M. A.
M.
, 1990,
“Koiter’s Stability Theory in a Computer Aided Engineering
(CAE) Environment
,” Int. J. Solids Struct.
0020-7683,
26
(9–10
), pp.
945
–973
.75.
Haftka
, R.
T.
, Mallet
, R.
H.
, and Nachbar
,
W.
,
1971, “Adaption of
Koiter’s Method to Finite Element Analysis of Snap-Through Buckling
Behavior
,” Int. J. Solids Struct.
0020-7683, 7
(10
), pp.
1427
–1445
.76.
Casciaro
,
R.
,
Salerno
,
G.
, and
Lanzo
, A.
D.
, 1992,
“Finite Element Asymptotic Analysis of Slender Elastic
Structures:, A. Simple Approach
,” Int. J. Numer.
Methods Eng.
0029-5981,
35
, pp.
1397
–1426
.77.
Salerno
,
G.
, and
Lanzo
, A.
D.
, 1997,
“A. Nonlinear Beam Finite Element for the Post-Buckling
Analysis of Plane Frames by Koiter’s Perturbation Approach
,”
Comput. Methods Appl. Mech. Eng.
0045-7825, 146
, pp.
325
–349
.78.
Britvec
, S.
J.
, 1973,
The Stability of Elastic Systems
,
Pergamon
,
Oxford
.79.
Huseyin
,
K.
,
1975, Non-Linear Theory of
Elastic Stability
, Noordhoff
,
Leyden
.80.
Huseyin
,
K.
,
1986, Multiple Parameter
Stability Theory and Its Applications
, Oxford Engineering
Science Series
Vol. 18
, Oxford
University Press
,
Oxford
.81.
Potier-Ferry
,
M.
,
1987, Foundations of Elastic
Postbuckling Theory
, Lecture Notes in Physics
Vol.
288
, Springer-Verlag
,
Heidelberg
, pp.
1
–82
.82.
El Naschie
, M.
S.
, 1990,
Stress, Stability and Chaos in Structural Engineering: An Energy
Approach
, McGraw-Hill
,
London
.83.
Godoy
, L.
A.
, 2000,
Theory of Elastic Stability: Analysis and Sensitivity
,
Taylor & Francis
,
Philadelphia, PA
.84.
Budiansky
,
B.
,
1969, “Postbuckling
Behavior of Cylinders in Torsion
,” Theory of Thin
Shells
, F. I.
Niordson
, ed.,
Springer-Verlag
, New
York
, pp.
212
–233
.85.
Hansen
, J.
S.
, and Roorda
,
J.
,
1974, “On a
Probabilistic Stability Theory for Imperfection Sensitive
Structures
,” Int. J. Solids Struct.
0020-7683,
10
(3
), pp.
341
–359
.86.
Hutchinson
, J.
W.
, 1967,
“Imperfection Sensitivity of Externally Pressurized Spherical
Shells
,” ASME J. Appl. Mech.
0021-8936, 34
(1
), pp.
49
–55
.87.
Tvergaard
,
V.
, and
Needleman
,
A.
,
1982, “On the
Development of Localized Buckling Patterns
,”
Collapse: The Buckling of Structure in Theory and Practice, IUTAM
Symposium
, J. M. T.
Thompson
and
G. W.
Hunt
, eds.,
Cambridge University Press
,
Cambridge
, pp.
299
–332
.88.
Amazigo
, J.
C.
, Budiansky
,
B.
, and
Carrier
, G.
F.
, 1970,
“Asymptotic Analyses of the Buckling of Imperfect Columns on
Nonlinear Elastic Foundations
,” Int. J. Solids
Struct.
0020-7683, 6
(10
), pp.
1341
–1356
.89.
Amazigo
, J.
C.
, and Fraser
, W.
B.
, 1971,
“Buckling Under External Pressure of Cylindrical Shells With
Dimple Shaped Initial Imperfections
,” Int. J. Solids
Struct.
0020-7683, 7
(8
), pp.
883
–900
.90.
Amazigo
, J.
C.
, 1974,
“Asymptotic Analysis of the Buckling of Externally
Pressurized Cylinders With Random Imperfections
,” Q.
Appl. Math.
0033-569X, 31
(4
), pp.
429
–442
.91.
Arbocz
,
J.
, and
Babcock
, C.
D.
,
Jr.,
1968, “Experimental
Investigation of the Effect of General Imperfections on the Buckling of
Cylindrical Shells
,” NASA Report No.
CR-1163.92.
Arbocz
,
J.
, and
Babcock
, C.
D.
,
Jr.,
1969, “The Effect of
General Imperfections on the Buckling of Cylindrical
Shells
,” ASME J. Appl. Mech.
0021-8936, 36
(1
), pp.
28
–38
.93.
Megson
, T. H.
G.
, and Hallak
,
G.
,
1992, “Measurement of
the Geometric Initial Imperfections in Diaphragms
,”
Thin-Walled Struct.
0263-8231, 14
(5
), pp.
381
–394
.94.
Chryssanthopoulos
, M.
K.
, Giavotto
,
V.
, and
Poggi
,
C.
,
1995, “Characterization
of Manufacturing Effects for Buckling-Sensitive Composite
Cylinders
,” Compos. Manuf.
0956-7143, 6
(2
), pp.
93
–101
.95.
Bernard
, E.
S.
, Coleman
,
R.
, and
Bridge
, R.
Q.
, 1999,
“Measurement and Assessment of Geometric Imperfections in
Thin-Walled Panels
,” Thin-Walled Struct.
0263-8231, 33
(2
), pp.
103
–126
.96.
Pircher
,
M.
, and
Wheeler
,
A.
,
2003, “The Measurement
of Imperfections in Cylindrical Thin-Walled Members
,”
Thin-Walled Struct.
0263-8231, 41
(5
), pp.
419
–433
.97.
Arbocz
,
J.
, and
Abramovich
,
H.
,
1979, “The Initial
Imperfection Data Bank at the Delft University of Technology: Part
I
,” Department of Aerospace Engineering, Delft
University of Technology
, Technical Report No.
LR-290.98.
Arbocz
,
J.
,
1982, “The Imperfection
Data Bank: A Means to Obtain Realistic Buckling Loads
,”
Buckling of Shells
, E.
Ramm
, ed.,
Springer-Verlag
,
Berlin
, pp.
535
–567
.99.
Klompé
, A. W.
H.
, 1986,
“Initial Imperfection Survey on a Cylindrical Shell, CSE at
the Fokker BV
,” Department of Aerospace
Engineering, Delft University of Technology
, Report No.
LR-495.100.
Dancy
,
R.
, and
Jacobs
,
D.
,
1988, “The Initial
Imperfection Data Bank at the Delft University of Technology: Part
II.
,” Department of Aerospace Engineering,
Delft University of Technology
, Technical Report No.
LR-559.101.
de Vries
,
J.
,
2001, “Imperfection
Database
,” CNES Conference
,
Third European Conference on Launcher Technology
,
Strasbourg
, France, pp.
323
–332
.102.
Singer
,
J.
,
Abramovich
,
H.
, and
Yaffe
,
R.
,
1978, “Initial
Imperfection Measurements of Integrally Stringer-Stiffened Cylindrical
Shells
,” Department of Aeronautical Engineering, Technion,
Israel Institute of Technology
, Haifa, TAE Report
No. 330.103.
Singer
,
J.
,
Abramovich
,
H.
, and
Yaffe
,
R.
,
1981, “Imperfection
Characteristics of Stiffened Shells: Group 1
,” Department of
Aeronautical Engineering, Technion, Israel Institute of
Technology
, Haifa, TAE Report No. 406.104.
Abramovich
,
H.
,
Singer
,
J.
, and
Yaffe
,
R.
,
1981, “Imperfection
Characteristics of Stiffened Shells: Group 1
,” Department of
Aeronautical Engineering, Technion, Israel Institute of
Technology
, Haifa, TAE Report No. 406.105.
Scott
, N.
D.
, Harding
, J.
E.
, and Dowling
, P.
J.
, 1987,
“Fabrication of Small Scale Stiffened Cylindrical
Shells
,” J. Strain Anal. Eng. Des.
0309-3247, 22
(2
), pp.
97
–106
.106.
Chryssanthopoulos
, M.
K.
, Baker
, M.
J.
, and Dowling
, P.
J.
, 1991,
“Statistical Analysis of Imperfections in Stiffened
Cylinders
,” J. Struct. Eng.
0733-9445,
117
(7
), pp.
1979
–1997
.107.
Chryssanthopoulos
, M.
K.
, Baker
, M.
J.
, and Dowling
, P.
J.
, 1991,
“Imperfection Modeling for Buckling Analysis of Stiffened
Cylinders
,” J. Struct. Eng.
0733-9445,
117
(7
), pp.
1998
–2017
.108.
Chryssanthopoulos
, M.
K.
, and Poggi
,
C.
,
1995, “Stochastic
Imperfection Modeling in Shell Buckling Studies
,”
Thin-Walled Struct.
0263-8231, 23
(1–4
), pp.
179
–200
.109.
Ho
,
D.
,
1974, “Buckling Load of
Non-Linear Systems With Multiple Eigenvalues
,” Int.
J. Solids Struct.
0020-7683, 10
(11
),
1315
–1330
.110.
Arbocz
,
J.
,
1974, “The Effect of
Initial Imperfections on Shell Stability
,” Thin
Shell Structures: Theory, Experiment and Design
, Y. C.
Fung
, and E.
E.
Sechler
, eds.,
Prentice-Hall
, Englewood
Cliffs, NJ
, pp.
205
–245
.111.
Samuels
,
P.
,
1980, “Bifurcation and
Limit Point Instability of Dual Eigenvalue Third Order
System
,” Int. J. Solids Struct.
0020-7683, 16
(8
), pp.
743
–756
.112.
Sadovsky
,
Z.
, 1978, “A
Theoretical Approach to the Problem of the Most Dangerous Initial Deflection
Shape in Stability Type Structural Problems,” Aplikace Matematiky,
23(4), pp. 248–266.113.
Nishino
,
F.
, and
Hartono
,
W.
,
1989, “Influential Mode
of Imperfection on Carrying Capacity of Structures
,”
J. Eng. Mech.
0733-9399, 115
(10
), pp.
2150
–2165
.114.
Murota
,
K.
, and
Ikeda
,
K.
,
1991, “Critical
Imperfection of Symmetric Structures
,” SIAM J. Appl.
Math.
0036-1399,
51
(5
), pp.
1222
–1254
.115.
Peek
,
R.
, and
Triantafyllidis
,
N.
,
1992, “Worst Shapes of
Imperfections for Space Trusses With Many Simultaneously Buckling
Modes
,” Int. J. Solids Struct.
0020-7683, 29
(19
), pp.
2385
–2402
.116.
Triantafyllidis
,
N.
, and
Peek
,
R.
,
1992, “On Stability and
the Worst Imperfection Shape in Solids With Nearly Simultaneous
Eigenmodes
,” Int. J. Solids Struct.
0020-7683, 29
(18
), pp.
2281
–2299
.117.
Peek
,
R.
,
1993, “Worst Shapes of
Imperfections for Space Trusses With Multiple Global and Local Buckling
Modes
,” Int. J. Solids Struct.
0020-7683, 30
(16
), pp.
2243
–2260
.118.
Deng
,
C.-G.
,
1994, “Equations of
Bifurcation Sets of Three-Parameter Catastrophes and the Application in
Imperfection Sensitivity Analysis
,” Int. J. Eng.
Sci.
0020-7225, 32
(11
), pp.
1811
–1822
.119.
Deml
,
M.
, and
Wunderlich
,
W.
,
1997, “Direct Evaluation
of the ‘Worst’ Imperfection Shape in Shell Buckling
,”
Comput. Methods Appl. Mech. Eng.
0045-7825,
149
(1–4
), pp.
201
–222
.120.
Ikeda
,
K.
,
Oide
,
K.
, and
Terada
,
K.
,
2002, “Imperfection
Sensitive Variation of Critical Loads at Hilltop Bifurcation
Point
,” Int. J. Eng. Sci.
0020-7225, 40
(7
), pp.
743
–772
.121.
Salerno
,
G.
, and
Uva
,
G.
,
2006, “Ho’s Theorem in
Global-Local Mode Interaction of Pin-Jointed Bar
Structures
,” Int. J. Non-Linear Mech.
0020-7462, 41
(3
), pp.
359
–376
.122.
Bolotin
, V.
V.
, 1958, “Statistical Methods in the Nonlinear
Theory of Elastic Shells,” Izvestija Academii Nauk SSSR, Otdeleni Tekhnicheskikh
Nauk, 3
(for an English translation see
1962, NASA Report No. TTF-85, pp.
1
–16
).123.
Boyce
, W.
E.
, 1961,
“Buckling of a Column With Random Initial
Displacement
,” J. Aerosp. Sci.
0095-9820, 28
(4
), pp.
308
–320
.124.
Fraser
, W.
B.
, and Budiansky
,
B.
,
1969, “The Buckling of a
Column With Random Initial Deflections
,” ASME J.
Appl. Mech.
0021-8936, 36
(2
), pp.
233
–240
.125.
Amazigo
, J.
C.
, 1971,
“Buckling of Stochastically Imperfect Columns on Nonlinear
Elastic Foundations
,” Q. Appl. Math.
0033-569X, 29
(3
), pp.
403
–409
.126.
Elishakoff
,
I.
,
1979, “Buckling of a
Stochastically Imperfect Finite Column on a Nonlinear Elastic Foundation: A
Reliability Study
,” ASME J. Appl. Mech.
0021-8936, 46
(2
), pp.
411
–416
.127.
Elishakoff
,
I.
,
1980, “Hoff’s Problems
in a Probabilistic Setting
,” ASME J. Appl.
Mech.
0021-8936, 47
(2
), pp.
403
–408
.128.
Day
,
W.
,
Karwowski
, A.
J.
, and Papanicolaou
,
G. C.
, 1989,
“Buckling of Randomly Imperfect Beams
,”
Acta Appl. Math.
0167-8019, 17
(3
), pp.
269
–286
.129.
Palassopoulos
, G.
V.
, 1989,
“Optimization of Imperfection-Sensitive
Structures
,” J. Eng. Mech.
0733-9399, 115
(8
), pp.
1663
–1682
.130.
Amazigo
, J.
C.
, 1969,
“Buckling Under Axial Compression of Long Cylindrical Shells
With Random Axisymmetric Imperfections
,” Q. Appl.
Math.
0033-569X, 26
(4
), pp.
537
–566
.131.
Tennyson
, R.
C.
, Muggeridge
, D.
B.
, and Caswell
, R.
D.
, 1971,
“Buckling of Circular Cylindrical Shells Having Axisymmetric
Imperfection Distributions
,” AIAA J.
0001-1452, 9
(5
), pp.
924
–930
.132.
Amazigo
, J.
C.
, and Budiansky
,
B.
,
1972, “Asymptotic
Formulas for the Buckling Stresses of Axially Compressed Cylinders With
Localized or Random Axisymmetric Imperfections
,”
ASME J. Appl. Mech.
0021-8936, 39
(1
), pp.
179
–184
.133.
Roorda
,
J.
, and
Hansen
, J.
S.
, 1972,
“Random Buckling Behavior in Axially Loaded Cylindrical
Shells With Axisymmetric Imperfections
,” J. Spacecr.
Rockets
0022-4650, 9
(2
), pp.
88
–91
.134.
van Slooten
, R.
A.
, and Soong
, T.
T.
, 1972,
“Buckling of a Long, Axially Compressed, Thin Cylindrical
Shell With Random Initial Imperfections
,” ASME J.
Appl. Mech.
0021-8936, 39
(4
), pp.
1066
–1071
.135.
Elishakoff
,
I.
, and
Arbocz
,
J.
,
1982, “Reliability of
Axially Compressed Cylindrical Shells With Random Axisymmetric
Imperfections
,” Int. J. Solids Struct.
0020-7683, 18
(7
), pp.
563
–585
.136.
Hansen
, J.
S.
, 1975,
“Influence of General Imperfections in Axially Loaded
Cylindrical Shells
,” Int. J. Solids Struct.
0020-7683, 11
(11
), pp.
1223
–1233
.137.
Hansen
, J.
S.
, 1977,
“General Random Imperfections in the Buckling of Axially
Loaded Cylindrical Shells
,” AIAA J.
0001-1452, 15
(9
), pp.
1250
–1256
.138.
Palassopoulos
, G.
V.
, 1980,
“A Probabilistic Approach to the Buckling of Thin Cylindrical
Shells With General Random Imperfections: Solution of the Corresponding
Deterministic Problem
,” Theory of Shells
,
W.
T.
Koiter
and G.
K.
Mikhailov
eds,
North Holland
,
Amsterdam
.139.
Elishakoff
,
I.
, and
Arbocz
,
J.
,
1985, “Reliability of
Axially Compressed Cylindrical Shells With General Nonsymmetric
Imperfections
,” ASME J. Appl. Mech.
0021-8936, 52
(1
), pp.
122
–128
.140.
Arbocz
,
J.
, and
Hol
, J. M. A.
M.
, 1991,
“Collapse of Axially Compressed Cylindrical Shells With
Random Imperfections
,” AIAA J.
0001-1452, 29
(12
), pp.
2247
–2256
.141.
Bielewicz
,
E.
,
Górski
,
J.
,
Schmidt
,
R.
, and
Walukiewicz
,
H.
,
1994, “Random Fields in
the Limit Analysis of Elastic-Plastic Shell Structures
,”
Comput. Struct.
0045-7949, 51
(3
), pp.
267
–275
.142.
Schenk
, C.
A.
, Schuëller
, G.
I.
, and Arbocz
,
J.
,
2000, “Buckling Analysis
of Cylindrical Shells With Random Imperfections
,”
International Conference on Monte Carlo Simulation
, Monte
Carlo, pp. 18
–21
.143.
Elishakoff
,
I.
,
1978, “Impact Buckling
of Thin Bar Via Monte Carlo Method
,” ASME J. Appl.
Mech.
0021-8936, 45
(3
), pp.
586
–590
.144.
Roorda
,
J.
,
1980, “Buckling of Elastic
Structures
, University of Waterloo
Press
,
Waterloo
.145.
Elishakoff
,
I.
,
1983, “How to Introduce
Initial-Imperfection Sensitivity Concept Into Design
,”
Collapse: Buckling of Structures of Theory and Practice
,
J. M.
T.
Thompson
and
G. W.
Hunt
eds, pp.
345
–357
.146.
Li
,
L.-Y.
,
1990, “Influence of
Loading Imperfections on the Stability of an Axially Compressed Cylindrical
Shell
,” Thin-Walled Struct.
0263-8231, 10
(3
), pp.
215
–220
.147.
Li
, Y.
W.
, Elishakoff
,
I.
,
Starnes
, J.
H.
Jr, and
Shinozuka
,
M.
,
1995, “Nonlinear
Buckling of a Structure With Random Imperfection and Random Axial
Compression by a Conditional Simulation Technique
,”
Comput. Struct.
0045-7949, 56
(1
), pp.
59
–64
.148.
Cederbaum
,
G.
, and
Arbocz
,
J.
,
1996, “Reliability of
Shells Via Koiter Formulas
,” Thin-Walled
Struct.
0263-8231, 24
(2
), pp.
173
–187
.149.
Królak
,
M.
,
Kołakowski
,
Z.
, and
Kotełko
,
M.
,
2001, “Influence of
Load-Non-Uniformity and Eccentricity on the Stability and Load Carrying
Capacity of Orthotropic Tubular Columns of Regular Hexagonal
Cross-Section
,” Thin-Walled Struct.
0263-8231, 39
(6
), pp.
483
–498
.150.
Shinozuka
,
M.
,
1987, “Structural
Response Variability
,” J. Eng. Mech.
0733-9399, 113
(6
), pp.
825
–843
.151.
Elishakoff
,
I.
,
Li
, Y. W.
, and Starnes
, J.
H.
Jr,
1994, “A Deterministic
Method to Predict the Effect of Unknown-But-Bounded Elastic Moduli on The
Buckling of Composite Structures
,” Comput. Methods
Appl. Mech. Eng.
0045-7825,
111
(1–2
), pp.
155
–167
.152.
Lagaros
, N.
D.
, and Papadopoulos
,
V.
,
2006, “Optimum Design of
Shell Structures With Random Geometric, Material and Thickness
Imperfections
,” Int. J. Solids Struct.
0020-7683, 43
(22–23), pp.
6948
–6964
.153.
Tvergaard
,
V.
,
1976, “Effect of
Thickness Inhomogeneities in Internally Pressurized Elastic-Plastic
Spherical Shells
,” J. Mech. Phys. Solids
0022-5096,
24
(5
), pp.
291
–304
.154.
Bielski
,
J.
,
1992, “Influence of
Geometrical Imperfections on Buckling Pressure and Post-Buckling Behavior of
Elastic Toroidal Shells
,” Mech. Struct.
Mach.
0890-5452, 20
(2
), pp.
145
–154
.155.
Koiter
, W.
T.
, Elishakoff
,
I.
,
Li
, Y. W.
, and Starnes
, J.
H.
Jr,
1994, “Buckling of an
Axially Compressed Cylindrical Shells of Variable
Thickness
,” Int. J. Solids Struct.
0020-7683, 31
(6
), pp.
797
–805
.156.
Li
, Y.
W.
, Elishakoff
,
I.
, and
Starnes
, J.
H.
Jr.,
1995, “Axial Buckling of
Composite Cylindrical Shells With Periodic Thickness
Variation
,” Comput. Struct.
0045-7949, 56
(1
), pp.
65
–74
.157.
Gusic
,
G.
,
Combescure
,
A.
, and
Jullien
, J.
F.
, 2000,
“Influence of Circumferential Thickness Variations on
Buckling of Cylindrical Shells Under External Pressure
,”
Comput. Struct.
0045-7949, 74
(4
), pp.
461
–477
.158.
Thompson
, J. M.
T.
, 1967,
“Towards a General Statistical Theory of
Imperfection-Sensitivity in Elastic Post-Buckling
,”
J. Mech. Phys. Solids
0022-5096, 15
(6
), pp.
413
–417
.159.
Roorda
,
J.
,
1969, “Some Statistical
Aspects of the Buckling of Imperfection-Sensitive
Structures
,” J. Mech. Phys. Solids
0022-5096, 17
(2
), pp.
111
–123
.160.
Haug
, E.
J.
, Choi
, K.
K.
, and Komkov
,
V.
,
1986, Design Sensitivity
Analysis of Structural Systems
, Mathematics in Science and
Engineering Series
Vol. 177
,
Academic
, Orlando,
FL
.161.
Palassopoulos
, G.
V.
, 1991,
“On the Optimization of Imperfection-Sensitive Structures
With Buckling Constraints
,” Eng. Optimiz.
0305-215X, 17
, pp.
219
–227
.162.
Reitinger
,
R.
, and
Ramm
,
E.
,
1995, “Buckling and
Imperfection Sensitivity in the Optimization of Shell
Structures
,” Thin-Walled Struct.
0263-8231, 23
(1–4
), pp.
159
–177
.163.
Ohsaki
,
M.
, and
Nakamura
,
T.
,
1994, “Optimum Design
With Imperfection Sensitivity Coefficients for Limit Point
Loads
,” Struct. Optim.
0934-4373, 8
, pp.
131
–137
.164.
Ohsaki
,
M.
,
2001, “Sensitivity
Analysis and Optimization Corresponding to a Degenerate Critical
Point
,” Int. J. Solids Struct.
0020-7683, 38
(19
), pp.
4955
–4967
.165.
Augusti
,
G.
, and
Barratta
,
A.
,
1976, “Reliability of
Slender Columns: Comparison of Different Approximations
,”
Buckling of Structures, Proceedings of the IUTAM Symposium on Buckling
of Structures
, Harvard University
,
Cambridge, MA
, B.
Budiansky
ed.,
Springer-Verlag
,
Berlin
, pp.
183
–198
.166.
Bolotin
, V.
V.
, 1969,
Statistical Methods in Structural Mechanics
,
Holden-Day Series in Mathematics and Physics
Vol.
7
, Holden-Day
,
San Francisco, CA
.167.
Bolotin
, V.
V.
, 1984,
Random Vibrations of Elastic Systems
, Mechanical
Elastic Stability
, Vol. 7
,
Martinus Nijhoff
, The
Hague
.168.
Ang
, A.
H.-S.
, and Tang
, W.
H.
, 1975,
Probability Concepts in Engineering Planning and Design
,
Wiley
, New
York
.169.
Thoft-Christensen
,
P.
, and
Baker
, M.
J.
, 1982,
Structural Reliability Theory and its Applications
,
Springer-Verlag
,
Berlin
.170.
Elishakoff
,
I.
,
1983, Probabilistic Methods in
the Theory of Structures
, Wiley
(Interscience)
, New
York
.171.
Augusti
,
G.
,
Barratta
,
A.
, and
Casciati
,
F.
,
1984, Probabilistic Methods in
Structural Engineering
, Chapman and
Hall
, New
York
.172.
Ben-Haim
,
Y.
,
1996, Robust Reliability in the
Mechanical Sciences
,
Springer-Verlag
,
Berlin
.173.
Haldar
,
A.
, and
Mahadevan
,
S.
,
2000, Probability, Reliability
and Statistical Methods in Engineering Design
,
Wiley
, New
York
.174.
Ikeda
,
K.
,
Murota
,
K.
, and
Elishakoff
,
I.
,
1996, “Reliability of
Structures Subject to Normally Distributed Initial
Imperfections
,” Comput. Struct.
0045-7949, 59
(3
), pp.
463
–469
.175.
Arbocz
,
J.
, and
Babcock
, C.
D.
, Jr,
1976, “Prediction of
Buckling Loads Based on Experimentally Measured Initial
Imperfections
,” Buckling of Structural Proceedings
of the IUTAM Symposium on Buckling of Structural
, Harvard
University, Cambridge, MA, B.
Budiansky
, ed.,
Springer-Verlag
,
Berlin
, pp.
291
–311
.176.
Elishakoff
,
I.
,
1988, “Stochastic
Simulation of an Initial Imperfection Data Bank for Isotropic Shells With
General Imperfections
,” Buckling of
Structures
, I.
Elishakoff
ed.,
Elsevier
,
Amsterdam
.177.
Turčić
,
F.
,
1991, “Resistance of
Axially Compressed Cylindrical Shells Determined for Measured Geometrical
Imperfections
,” J. Constr. Steel Res.
0143-974X, 19
(3
), pp.
225
–234
.178.
Pircher
,
M.
,
Berry
, P.
A.
, Ding
,
X.
, and
Bridge
, R.
Q.
, 2001,
“The Shape of Circumferential Weld-Induced Imperfections in
Thin-Walled Steel Silos and Tanks
,” Thin-Walled
Struct.
0263-8231,
39
(12
), pp.
999
–1014
.179.
Lin
,
X.
, and
Teng
, J.
G.
, 2003,
“Iterative Fourier Decomposition of Imperfection Measurements
at Non-Uniformly Distributed Sampling Points
,”
Thin-Walled Struct.
0263-8231, 41
(10
), pp.
901
–924
.180.
Edlund
, B. L.
O.
, and Leopoldson
,
U. L. C.
, 1975,
“Computer Simulation of the Scatter in Steel Member
Strength
,” Comput. Struct.
0045-7949, 5
(4
), pp.
209
–224
.181.
Wang
,
F.-Y.
,
1990, “Monte Carlo
Analysis of Nonlinear Vibration of Rectangular Plates With Random Geometric
Imperfections
,” Int. J. Solids Struct.
0020-7683, 26
(1
), pp.
99
–109
.182.
Palassopoulos
, G.
V.
, 1992,
“Response Variability of Structures Subjected to Bifurcation
Buckling
,” J. Eng. Mech.
0733-9399,
118
(6
), pp.
1164
–1183
.183.
Palassopoulos
, G.
V.
, 1991,
“Reliability-Based Design of Imperfection Sensitive
Structures
,” J. Eng. Mech.
0733-9399,
117
(6
), pp.
1220
–1240
.184.
Trendafilova
,
I.
, and
Ivanova
,
J.
,
1995, “Loss of Stability
of Thin, Elastic, Strongly Convex Shells of Revolution With Initial
Imperfections, Subjected to Uniform Pressure: A Probabilistic
Approach
,” Thin-Walled Struct.
0263-8231, 23
(1–4
), pp.
201
–214
.185.
Elishakoff
,
I.
,
1998, “How to Introduce
Initial-Imperfection Sensitivity Concept Into Design 2
,”
NASA CP, Report No.206280.186.
Karadeniz
,
H.
,
van Manen
,
S.
, and
Vrouwenvelder
,
A.
,
1982, “Probabilistic
Reliability Analysis for the Fatigue Limit State of Gravity and Jacket Type
Structures
,” Proceedings of the Third International
Conference: BOSS
, McGraw-Hill
,
London
.187.
Elishakoff
,
I.
,
van Manen
,
S.
,
Vermeulen
, P.
G.
, and Arbocz
,
J.
,
1987, “First-Order
Second-Moment Analysis of the Buckling of Shells With Random
Imperfections
,” AIAA J.
0001-1452, 25
(8
), pp.
1113
–1117
.188.
Elishakoff
,
I.
,
2000, “Possible
Limitations of Probabilistic Methods in Engineering
,”
Appl. Mech. Rev.
0003-6900, 53
(2
), pp.
19
–36
.189.
Weingarten
, V.
I.
, Morgan
, E.
J.
, and Seide
,
P.
,
1965, “Elastic Stability
of Thin-Walled Cylindrical and Conical Shells Under Axial
Compression
,” AIAA J.
0001-1452, 3
(3
), pp.
500
–505
.190.
NASA, 1968,
“
Buckling of Thin-Walled Circular Cylinders
,”
NASA, SP Report No. 8007.191.
Elishakoff
,
I.
,
Li
, Y. W.
, and Starnes
, J.
H.
,
Jr.,
2001, Non-Classical Problems in
the Theory of Elastic Stability
, Cambridge
University Press
,
Cambridge
.192.
Croll
, J. G.
A.
, 1981,
“Lower Bounds Elasto-Plastic Buckling of
Cylinders
,” Proc. Inst. of Civ. Eng. (UK)
0307-8353, 2
(71
), pp.
235
–261
.193.
Croll
, J. G.
A.
, and Batista
, R.
C.
, 1981,
“Explicit Lower Bounds for the Buckling of Axially Loaded
Cylinders
,” Int. J. Mech. Sci.
0020-7403, 23
(6
), pp.
331
–343
.194.
Ben-Haim
,
Y.
, and
Elishakoff
,
I.
,
1990, Convex Models of
Uncertainty in Applied Mechanics
, Studies in Applied
Mechanics.
Vol. 25
,
Elsevier
Amsterdam
.195.
Lindberg
, H.
E.
, 1992,
“Convex Models of Uncertain Imperfection Control in Multimode
Dynamic Buckling
,” ASME J. Appl. Mech.
0021-8936,
59
(4
), pp.
937
–945
.196.
Ben-Haim
,
Y.
,
1993, “Convex Models of
Uncertainty in Radial Pulse Buckling of Shells
,”
ASME J. Appl. Mech.
0021-8936,
60
(3
), pp.
683
–688
.197.
Elishakoff
,
I.
,
Lin
, Y.
K.
, and Zhu
, L.
P.
, 1994,
Probabilistic and Convex Modelling of Acoustically Excited
Structures
, Studies in Applied Mechanics
Vol.
39
, Elsevier
,
Amsterdam
.198.
Lombardi
,
M.
, and
Haftka
, R.
T.
, 1998,
“Anti-Optimization Technique for Strutural Design Under Load
Uncertainties
,” Comput. Methods Appl. Mech.
Eng.
0045-7825,
157
(1–2
), pp.
19
–31
.199.
Zingales
,
M.
, and
Elishakoff
,
I.
,
2000, “Anti-Optimization
Versus Probability in an Applied Mechanics Problem: Vector
Uncertainty
,” ASME J. Appl. Mech.
0021-8936,
67
(3
), pp.
472
–484
.200.
Papadimitriou
,
C.
,
Beck
, J.
L.
, and Katafygiotis
,
L. S.
, 2001,
“Updating Robust Reliability Using Structural Test
Data
,” Probab. Eng. Mech.
0266-8920,
16
(2
), pp.
103
–113
.201.
Adali
,
S.
,
Elishakoff
,
I.
,
Richter
,
A.
, and
Verijenko
, V.
E.
, 1994,
“Optimal Design of Symmetric Angle-Ply Laminates for Maximum
Buckling Load With Scatter in Material Properties
,”
A Collection of Technical Papers Fifth AIAA/USAF/NASA/ISSMO
Symposium on Multidisciplinary Analysis and Optimization
,
J.
Sobieski
, ed., Paper No.
AIAA-94-4365-CP, Vol. 2
, pp.
1041
–1045
.202.
Adali
,
S.
,
Richter
,
A.
, and
Verijenko
, V.
E.
, 1997,
“Minimum Weight Design of Symmetric Angle-Ply Laminates With
Incomplete Information on Initial Imperfections
,”
ASME J. Appl. Mech.
0021-8936,
64
(1
), pp.
90
–96
.203.
Lee
,
J.
,
Haftka
, R.
T.
, Griffin
, O.
H.
, Jr.,
Watson
, L.
T.
, and Sensmeier
,
M. D.
, 1994,
“Detecting Delamination in a Composite Beam Using
Anti-Optimization
,” Struct. Optim.
0934-4373, 8
, pp.
93
–100
.204.
Astill
,
J.
,
Nosseir
, C.
J.
, and Shinozuka
,
M.
,
1972, “Impact Loading on
Structures With Random Properties
,” J. Struct.
Mech.
0360-1218, 1
(1
), pp.
63
–67
.205.
Nakagiri
,
S.
, and
Hisada
,
T.
,
1980, “A. Note on
Stochastic Finite Element Method (Part 1): Variation of Stress and Strain
Caused by Shape Fluctuation
,” Monthly J. Inst.
Industrial Sci.
, Univ. of Tokyo, 32
, pp.
39
–42
.206.
Handa
,
K.
, and
Andersson
,
K.
,
1981, “Application of
Finite Element Method in the Statistical Analysis of
Structures
,” Proceedings of the Third International
Conference on Structural Safety and Reliability
,
Elsevier
,
Amsterdam
, pp.
409
–417
.207.
der Kiureghian
,
A.
,
1985, “Finite Element
Methods in Structural Safety Studies
,” Proceedings
of the Symposium on Structural Safety Studies, ASCE
,
Denver
, pp.
40
–52
.208.
Liu
, W.
K.
, Belytschko
,
T.
, and
Mani
,
A.
,
1986, “Probabilistic
Finite Elements for Nonlinear Structural Dynamics
,”
Comput. Methods Appl. Mech. Eng.
0045-7825,
56
(1
), pp.
61
–81
.209.
Elishakoff
,
I.
, and
Ren
, Y.
J.
, 2003,
Finite Element Methods for Structures With Large Stochastic
Variations
, Oxford University
Press
,
Oxford
.210.
Schuëller
, G.
I.
, 1997,
“A State-of-the-Art Report on Computational Stochastic
Mechanics
,” Probab. Eng. Mech.
0266-8920,
12
(4
), pp.
197
–321
.211.
Faravelli
,
L.
,
1989, “Response Surface
Approach for Reliability Analysis
,” J. Eng.
Mech.
0733-9399, 115
(2
), pp.
2763
–2781
.212.
Bucher
, C.
G.
, and Bourgund
,
U.
,
1990, “A. Fast and
Efficient Response Surface Approach for Structural Reliability
Problems
,” Struct. Safety
0167-4730, 7
(1
), pp.
57
–66
.213.
Rajashekhar
, M.
R.
, and Ellingwood
,
B. R.
, 1993,
“A. New Look at the Response Surface Approach for Reliability
Analysis
,” Struct. Safety
0167-4730, 12
(3
), pp.
205
–220
.214.
Myers
, R.
H.
, and Montgomery
,
D. C.
, 1995,
Response Surface Methodology: Process and Product Optimization Using
Design Experiments
, Wiley
,
New York
.215.
Kim
,
S.-H.
, and
Na
,
S.-W.
,
1997, “Response Surface
Method Using Vector Projected Sampling Points
,”
Struct. Safety
0167-4730, 19
(1
), pp.
3
–19
.216.
Venter
,
G.
,
Haftka
, R.
T.
, Starnes
, J.
H.
,
Jr.,
1998, “Construction of
Response Surface Approximation for Design Optimization
,”
AIAA J.
0001-1452, 36
(12
), pp.
2242
–2249
.217.
Zheng
,
Y.
, and
Das
, P.
K.
, 2000,
“Improved Response Surface Method and its Application to
Stiffened Plate Reliability Analysis
,” Eng.
Struct.
0141-0296,
22
(5
), pp.
544
–551
.218.
Gomes
, H.
M.
, and Awruch
, A.
M.
, 2004,
“Comparison of Response Surface and Neural Network With Other
Methods for Structural Reliability Analysis
,”
Struct. Safety
0167-4730, 26
(1
), pp.
49
–67
.219.
Palassopoulos
, G.
V.
, 1973,
“On the Buckling of Axially Compressed Thin Cylindrical
Shells
,” J. Struct. Mech.
0360-1218, 2
(3
), pp.
177
–193
.220.
Palassopoulos
, G.
V.
, and Shinozuka
,
M.
,
1973, “On the Elastic
Stability of Thin Shells
,” J. Struct. Mech.
0360-1218, 1
(4
), pp.
439
–449
.221.
Palassopoulos
, G.
V.
, 1993,
“New Approach to Buckling of Imperfection-Sensitive
Structures
,” J. Eng. Mech.
0733-9399,
119
(4
), pp.
850
–869
.222.
Ikeda
,
K.
, and
Murota
,
K.
,
1991, “Random Initial
Imperfections of Structures
,” Int. J. Solids
Struct.
0020-7683, 28
(8
), pp.
1003
–1021
.223.
Ikeda
,
K.
, and
Murota
,
K.
,
1993, “Statistics of
Normally Distributed Initial Imperfections
,” Int. J.
Solids Struct.
0020-7683, 30
(18
), pp.
2445
–2467
.224.
Murota
,
K.
, and
Ikeda
,
K.
,
1992, “On Random
Imperfections for Structures of Regular-Polygonal Symmetry
,”
SIAM J. Appl. Math.
0036-1399,
52
(6
), pp.
1780
–1803
.225.
Ikeda
,
K.
, and
Murota
,
K.
,
1999, “Systematic
Description of Imperfect Bifurcation Behavior of Symmetric
Systems
,” Int. J. Solids Struct.
0020-7683, 36
(11
), pp.
1561
–1596
.226.
Ikeda
,
K.
,
Chida
,
T.
, and
Yanagisawa
,
E.
,
1997, “Imperfection
Sensitive Strength Variation of Soil Specimens
,” J.
Mech. Phys. Solids
0022-5096, 45
(2
), pp.
293
–315
.227.
Ikeda
,
K.
,
Maruyama
,
K.
,
Ishida
,
H.
, and
Kagawa
,
S.
,
1997, “Bifurcation in
Compressive Behavior of Concrete
,” ACI Mater.
J.
0889-325X, 94
(6
), pp.
484
–491
.228.
Okazawa
,
S.
,
Oide
,
K.
,
Ikeda
,
K.
, and
Terada
,
K.
,
2002, “Imperfection
Sensitivity and Probabilistic Variation of Tensile Strength of Steel
Members
,” Int. J. Solids Struct.
0020-7683, 39
(6
), pp.
1651
–1671
.229.
Ikeda
,
K.
,
Murota
,
K.
, and
Nakano
,
M.
,
1994, “Echelon Modes in
Uniform Materials
,” Int. J. Solids Struct.
0020-7683,
31
(19
), pp.
2709
–2733
.230.
Ikeda
,
K.
,
Murota
,
K.
,
Yamakawa
,
Y.
, and
Yanagisawa
,
E.
,
1997, “Mode Switching
and Recursive Bifurcation in Granular Materials
,” J.
Mech. Phys. Solids
0022-5096, 45
(11–12
), pp.
1929
–1953
.231.
Ikeda
,
K.
,
Murakami
,
S.
,
Saiki
,
I.
,
Sano
,
I.
, and
Oguma
,
N.
,
2001, “Image Simulation
of Uniform Materials Subjected to Recursive Bifurcation
,”
Int. J. Eng. Sci.
0020-7225, 39
(17
), pp.
1963
–1999
.232.
Ikeda
,
K.
,
Okazawa
,
S.
,
Terada
,
K.
,
Noguchi
,
H.
, and
Usami
,
T.
,
2001, “Recursive
Bifurcation of Tensile Steel Specimens
,” Int. J.
Eng. Sci.
0020-7225,
39
(17
), pp.
1913
–1934
.233.
Murota
,
K.
,
Ikeda
,
K.
, and
Terada
,
K.
,
1999, “Bifurcation
Mechanism Underlying Echelon Mode Formation
,”
Comput. Methods Appl. Mech. Eng.
0045-7825,
170
(3–4
), pp.
423
–448
.234.
Tanaka
,
R.
,
Saiki
,
I.
, and
Ikeda
,
K.
,
2002, “Group-Theoretic
Bifurcation Mechanism for Pattern Formation in Three-Dimensional Uniform
Materials
,” Int. J. Bifurcation Chaos
0218-1274, 12
(12
), pp.
2767
–2797
.235.
Iooss
,
G.
, and
Joseph
, D.
D.
, 1990,
Elementary Stability and Bifurcation Theory
,
Undergraduate Texts in Mathematics
, 2nd
ed., Springer-Verlag
,
New York
.236.
Ohsaki
,
M.
,
2001, “Sensitivity
Analysis of Coincident Critical Loads With Respect to Minor
Imperfection
,” Int. J. Solids Struct.
0020-7683, 38
(19
), pp.
4571
–4583
.237.
Weibull
,
W.
,
1939, “A. Statistical
Theory on the Strength of Materials
,” The Royal
Swedish Institute for Engineering Research
, Proceedings No.
151
, pp.
1
–52
.238.
Needleman
,
A.
,
1972, “A Numerical Study
of Necking in Circular Cylindrical Bars
,” J. Mech.
Phys. Solids
0022-5096,
20
(2
), pp.
111
–127
.239.
Hutchinson
, J.
W.
, and Miles
, J.
P.
, 1974,
“Bifurcation Analysis of the Onset of Necking in an
Elastic/Plastic Cylinder Under Uniaxial Tension
,” J.
Mech. Phys. Solids
0022-5096,
22
(1
), pp.
61
–71
.240.
Ikeda
,
K.
,
Providéncia
,
P.
, and
Hunt
, G.
W.
, 1993,
“Multiple Equilibria for Unlinked and Weakly-Linked Cellular
Forms
,” Int. J. Solids Struct.
0020-7683, 30
(3
), pp.
371
–384
.241.
Ikeda
,
K.
,
Ohsaki
,
M.
, and
Kanno
,
Y.
,
2004, “Imperfection
Sensitivity of Hilltop Branching Points of Systems With Dihedral Group
Symmetry
,” Part.242.
Hill
,
R.
, and
Hutchinson
, J.
W.
, 1975,
“Bifurcation Phenomena in the Plane Tension
Test
,” J. Mech. Phys. Solids
0022-5096,
23
(4–5
), pp.
239
–264
.243.
Ikeda
,
K.
, and
Goto
,
S.
,
1993, “Imperfection
Sensitivity for Size Effect of Granular Materials
,”
Soils Found.
0038-0806, 33
(2
), pp.
157
–170
.244.
Ikeda
,
K.
, and
Murota
,
K.
,
1996, “Bifurcation as
Sources of Uncertainty in Soil Shearing Behavior
,”
Soils Found.
0038-0806, 36
(1
), pp.
73
–84
.245.
Ikeda
,
K.
, and
Murota
,
K.
,
1997, “Recursive
Bifurcation as Sources of Complexity in Soil Shearing
Behavior
,” Soils Found.
0038-0806, 37
(3
), pp.
17
–29
.246.
Ikeda
,
K.
,
Yamakawa
,
Y.
, and
Tsutsumi
,
S.
,
2003, “Simulation and
Interpretation of Diffuse Mode Bifurcation of Elastoplastic
Solids
,” J. Mech. Phys. Solids
0022-5096,
51
(9
), pp.
1649
–1673
.247.
Hutchinson
, J.
W.
, 1972,
“On the Postbuckling Behavior of Imperfection-Sensitive
Structures in the Plastic Range
,” ASME J. Appl.
Mech.
0021-8936, 39
(1
), pp.
155
–162
.248.
Needleman
,
A.
,
1975, “Postbifurcation
Behavior and Imperfection Sensitivity of Elastic-Plastic Circular
Plates
,” Int. J. Mech. Sci.
0020-7403, 17
(1
), pp.
1
–13
.249.
Byskov
,
E.
,
1982, “Imperfection
Sensitivity of Elastic-Plastic Truss Columns
,” AIAA
J.
0001-1452, 20
(2
), pp.
263
–267
.250.
Ming
,
S.-X.
, and
Wenda
,
L.
,
1990, “Postbuckling and
Imperfection Sensitivity Analysis of Structures in the Plastic Range—Part 1:
Model Analysis
,” Thin-Walled Struct.
0263-8231, 10
(4
), pp.
263
–275
.251.
Su
, X.
M.
, and Lu
, W.
D.
, 1991,
“Post-Bifurcation and Imperfection Sensitivity Analysis of
Plastic Clamped Circular Plates
,” Int. J. Solids
Struct.
0020-7683, 27
(6
), pp.
769
–782
.252.
Feldman
,
E.
, and
Aboudi
,
J.
,
1993, “Postbuckling
Analysis and Imperfection Sensitivity of Viscoplastic Plates and Cylindrical
Panels
,” Thin-Walled Struct.
0263-8231, 17
(4
), pp.
273
–290
.253.
Lu
,
Z.
,
Obrecht
,
H.
, and
Wunderlich
,
W.
,
1995, “Imperfection
Sensitivity of Elastic and Elastic-Plastic Torispherical Pressure Vessel
Heads
,” Thin-Walled Struct.
0263-8231, 23
(1–4
), pp.
21
–39
.254.
Mandadi
,
V.
, and
Huseyin
,
K.
,
1978, “The Effect of
Symmetry on the Imperfection-Sensitivity of Coincident Critical
Points
,” Ing.-Arch.
0020-1154, 47
(1
), pp.
35
–45
.255.
Hunt
, G.
W.
, 1986,
“Hidden (A)Symmetries of Elastic and Plastic
Bifurcation
,” Appl. Mech. Rev.
0003-6900, 39
(8
), pp.
1165
–1186
.256.
Golubitsky
,
M.
,
Marsden
,
J.
, and
Schaeffer
,
D.
,
1984, “Bifurcation
Problems With Hidden Symmetries
,” Partial
Differential Equations and Dynamical Systems
, W.
Fitzgibbon
, ed.,
Pitman
,
London
, pp.
181
–210
.257.
Hunt
, G.
W.
, Williams
, K. A.
J.
, and Cowell
, R.
G.
, 1986,
“Hidden Symmetry Concepts in the Elastic Buckling of
Axially-Loaded Cylinders
,” Int. J. Solids
Struct.
0020-7683,
22
(12
), pp.
1501
–1515
.258.
Augusti
,
G.
,
1964, “Stabilita di Strutture
Elastische Elementari in Presenza di Grandi Spostamenri,” Publication No. 172,
Department of Structural Sciences, Fáculty of Engineering, University of Naples,
Italy.259.
Thompson
, J. M.
T.
, 1964,
“The Rotationally-Symmetric Branching Behaviour of a Complete
Spherical Shell
,” Proc. K. Ned. Akad. Wet., Ser. B:
Phys. Sci.
0023-3366, 67
, pp.
295
–311
.260.
Lange
, C.
G.
, and Kriegsmann
,
G. A.
, 1981,
“The Axisymmetric Branching Behavior of Complete Spherical
Shells
,” Q. Appl. Math.
0033-569X, 39
(2
), pp.
145
–178
.261.
Yoshimura
,
Y.
,
1951, “On the Mechanism
of Buckling of a Cylindrical Shell Under Axial Compression
,”
Rep. Inst. Sci. Tech. University of Tokyo
, Tokyo,
5
(5
) (English translation: Technical
Memorandum No. 1390, National Advisory Committee on Aeronautics, Washington,
D.C., 1955).262.
Esslinger
,
M.
, and
Geier
,
B.
,
1976, “Calculated
Postbuckling Loads as Lower Limits for the Buckling Loads of Thin-Walled
Circular Cylinders
,” Buckling of Structures
Proceedings of the IUTAM Symposium on Buckling of Structures
,
Harvard University
,
Cambridge, MA
, B.
Budiansky
ed.,
Springer-Verlag
,
Berlin
, pp.
274
–290
.263.
Yamaki
,
N.
,
1984, Elastic Stability of
Circular Cylindrical Shells
, Applied Mathematics and
Mechanics
Vol. 27
,
Elsevier
,
Amsterdam
.264.
Ikeda
,
K.
,
Murota
,
K.
, and
Fujii
,
H.
,
1991, “Bifurcation
Hierarchy of Symmetric Structures
,” Int. J. Solids
Struct.
0020-7683, 27
(12
), pp.
1551
–1573
.265.
Wohlever
, J.
C.
, and Healey
, T.
J.
, 1995,
“A Group Theoretic Approach to the Global Bifurcation
Analysis of an Axially Compressed Cylindrical Shell
,”
Comput. Methods Appl. Mech. Eng.
0045-7825,
122
(3–4
), pp.
315
–349
.266.
Fujii
,
F.
,
Ikeda
,
K.
,
Noguchi
,
H.
, and
Okazawa
,
S.
,
2001, “Modified
Stiffness Iteration to Pinpoint Multiple Bifurcation
Points
,” Comput. Methods Appl. Mech. Eng.
0045-7825, 190
(18–19
), pp.
2499
–2522
.267.
Davis
, G.
H.
, 1984,
Structural Geology of Rocks and Regions
,
Wiley
,
Singapore
.268.
Poirier
,
J.-P.
,
1985, Creep of Crystals:
High-Temperature Deformation Processes in Metals, Ceramics and
Minerals
, Cambridge Earth Science Series
Vol.
4
, Cambridge University
Press
,
Cambridge
.269.
Bai
,
Y.
, and
Dodd
,
B.
,
1992, Adiabatic Shear
Localization: Occurrence, Theories and Applications
,
Pergamon
,
Oxford
.270.
Petryk
,
H.
, and
Thermann
,
K.
,
2002, “Post-Critical
Plastic Deformation in Incrementally Nonlinear Materials
,”
J. Mech. Phys. Solids
0022-5096, 50
(5
), pp.
925
–954
.271.
Voskamp
, A.
P.
, and Hoolox
, G.
E.
, 1998,
“Failsafe Rating of Ball Bearing Components: Effect of Steel
Manufacturing Processes on the Quality of Bearing Steels
,”
ASTM Spec. Tech. Publ.
0066-0558, 987
, pp.
102
–112
.272.
Nicolas
,
A.
,
1995, The Mid-Oceanic Ridges:
Mountains Below Sea Level
,
Springer-Verlag
,
Berlin
.273.
Archambault
,
G.
,
Rouleau
,
A.
,
Daigneault
,
R.
, and
Flamand
,
R.
,
1993, “Progressive
Failure of Rock Masses by a Self-Similar Anastomosing Process of Rupture at
All Scales and Its Scale Effect on Their Shear Strength
,”
Scale Effects in Rock Masses, 93
, A. P.
da Cunha
, ed.,
Balkema
,
Rotterdam
, pp.
133
–141
.274.
Karam
, G.
N.
, and Gibson
, L.
J.
, 1995,
“Elastic Buckling of Cylindrical Shells With Elastic Cores:
I. Analysis
,” Int. J. Solids Struct.
0020-7683,
32
(8–9
), pp.
1259
–1283
.275.
Karam
, G.
N.
, and Gibson
, L.
J.
, 1995,
“Elastic Buckling of Cylindrical Shells With Elastic Cores:
II. Experiments
,” Int. J. Solids Struct.
0020-7683,
32
(8–9
), pp.
1285
–1306
.276.
Green
, P.
B.
, Steele
, C.
R.
, and Rennich
, S.
C.
, 1996,
“Phyllotactic Patterns: A Biophysical Mechanism for Their
Origin
,” Ann. Bot. (London)
0305-7364,
77
, pp.
515
–527
.277.
Green
, P.
B.
, 1999,
“Expression of Pattern in Plants: Combining Molecular and
Calculus-Based Biophysical Paradigms
,” Am. J.
Bot.
0002-9122,
86
(8
), pp.
1059
–1076
.278.
Steele
, C.
R.
, 2000,
“Shell Stability Related to Pattern Formation in
Plants
,” ASME J. Appl. Mech.
0021-8936,
67
(2
), pp.
237
–247
.279.
Gibson
, L.
J.
, Ashby
, M.
F.
, Zhang
,
J.
, and
Triantafillou
, T.
C.
, 1989,
“Failure Surfaces for Cellular Materials Under Multiaxial
Loads: I. Modeling
,” Int. J. Mech. Sci.
0020-7403, 31
, pp.
635
–663
.280.
Papka
, S.
D.
, and Kyriakides
,
S.
,
1994, “In-Plane
Compressive Response and Crushing of Honeycomb
,” J.
Mech. Phys. Solids
0022-5096,
42
(10
), pp.
1499
–1532
.281.
Gibson
, L.
J.
, and Ashby
, M.
F.
, 1997,
Cellular Solids: Structure and Properties
, 2nd
ed., Cambridge University Press
,
Cambridge
.282.
Triantafyllidis
,
N.
, and
Schraad
, M.
W.
, 1998,
“Onset of Failure in Aluminum Honeycombs Under General
In-Plane Loading
,” J. Mech. Phys. Solids
0022-5096,
46
(6
), pp.
1089
–1124
.283.
Zhu
, H.
X.
, and Mills
, N.
J.
, 2000,
“The In-Plane Non-Linear Compression of Regular
Honeycombs
,” Int. J. Solids Struct.
0020-7683,
37
(13
), pp.
1931
–1949
.284.
Papka
, S.
D.
, and Kyriakides
,
S.
,
1999, “Biaxial Crushing
of Honeycombs—Part I: Experiments
,” Int. J. Solids
Struct.
0020-7683,
36
(29
), pp.
4367
–4396
.285.
Chung
,
J.
, and
Waas
, A.
M.
, 1999,
“Compressive Response and Failure of Circular Cell
Polycarbonate Honeycombs Under Inplane Uniaxial Stresses
,”
ASME J. Eng. Mater. Technol.
0094-4289,
121
, pp.
494
–502
.286.
Chung
,
J.
, and
Waas
, A.
M.
, 2001,
“In-Plane Biaxial Crush Response of Polycarbonate
Honeycombs
,” J. Eng. Mech.
0733-9399, 127
, pp.
180
–193
.287.
Guo
, X.
E.
, and Gibson
, L.
J.
, 1999,
“Behavior of Intact and Damaged Honeycomb: A Finite Element
Study
,” Int. J. Mech. Sci.
0020-7403,
41
(1
), pp.
85
–105
.288.
Papka
, S.
D.
, and Kyriakides
,
S.
,
1999, “Biaxial Crushing
of Honeycombs—Part II: Analysis
,” Int. J. Solids
Struct.
0020-7683,
36
(29
), pp.
4397
–4423
.289.
Ohno
,
N.
,
Okumura
,
D.
, and
Noguchi
,
H.
,
2002, “Microscopic
Symmetric Bifurcation Condition of Cellular Solids Based on a Homogenization
Theory of Finite Deformation
,” J. Mech. Phys.
Solids
0022-5096, 50
(5
), pp.
1125
–1153
.290.
Okumura
,
D.
,
Ohno
,
N.
, and
Noguchi
,
H.
,
2002, “Post-Buckling
Analysis of Elastic Honeycombs Subject to In-Plane Biaxial
Compression
,” Int. J. Solids Struct.
0020-7683, 39
(13–14
), pp.
3487
–3503
.291.
Okumura
,
D.
,
Ohno
,
N.
, and
Noguchi
,
H.
,
2004, “Elastoplastic
Microscopic Bifurcation and Post-Bifurcation Behavior of Periodic Cellular
Solids
,” J. Mech. Phys. Solids
0022-5096, 52
(3
), pp.
641
–666
.292.
Stewart
,
I.
, and
Golubitsky
,
M.
,
1992, Fearful Symmetry: Is God
a Geometer?
Blackwell
,
Oxford
.293.
Serre
,
J.-P.
,
1977, Linear Representations of
Finite Groups
, Graduate Texts in Mathematics
Vol.
42
, Springer-Verlag
,
New York
.294.
Kettle
, S. F.
A.
, 1995,
Symmetry and Structure
, 2nd ed.,
Wiley
,
Chichester
.295.
Ludwig
,
W.
, and
Falter
,
C.
,
1996, Symmetries in Physics:
Group Theory Applied to Physical Problems
, Springer Series
in Solid-State Science
Vol. 64
2nd ed., Springer-Verlag
,
Berlin
.296.
Kim
, S.
K.
, 1999,
Group Theoretical Methods and Applications to Molecules and
Crystals
, Cambridge University
Press
,
Cambridge
.297.
Fujii
,
H.
, and
Yamaguti
,
M.
,
1980, “Structure of
Singularities and Its Numerical Realization in Nonlinear
Elasticity
,” J. Math. Kyoto Univ.
0023-608X, 20
(3
), pp.
489
–590
.298.
Sattinger
, D.
H.
, 1980,
“Bifurcation and Symmetry Breaking in Applied
Mathematics
,” Bull., New Ser., Am. Math.
Soc.
0273-0979, 3
(2
), pp.
779
–819
.299.
Golubitsky
,
M.
, and
Stewart
,
I.
,
2002, The Symmetry
Perspective
, Birkhäuser-Verlag
,
Basel
.300.
Healey
, T.
J.
, 1988,
“A Group Theoretic Approach to Computational Bifurcation
Problems With Symmetry
,” Comput. Methods Appl. Mech.
Eng.
0045-7825, 67
(3
), pp.
257
–295
.301.
Gatermann
,
K.
, and
Werner
,
B.
,
1994, “Group Theoretical
Mode Interactions With Different Symmetries
,” Int.
J. Bifurcation Chaos Appl. Sci. Eng.
0218-1274, 4
(1
), pp.
177
–191
.302.
Ikeda
,
K.
, and
Nakazawa
,
M.
,
1998, “Bifurcation
Hierarchy of a Rectangular Plate
,” Int. J. Solids
Struct.
0020-7683, 35
(7–8
), pp.
593
–617
.303.
Saiki
,
I.
,
Ikeda
,
K.
, and
Murota
,
K.
,
2005, “Flower Patterns
Appearing on a Honeycomb Structure and Their Bifurcation
Mechanism
,” Int. J. Bifurcation Chaos Appl. Sci.
Eng.
0218-1274, 15
(2
), pp.
497
–515
.Copyright © 2008
by American Society of Mechanical Engineers
You do not currently have access to this content.
