Most manipulator motion controllers require joint velocity feedback. Whenever joint velocities are not measurable, they are estimated from the joint positions. However, velocity estimates tend to be inaccurate under low-speed motion or low sensor resolution conditions. Moreover, velocity estimators may either be susceptible to model uncertainties or introduce additional dynamics (e.g., phase lag) to the control loop. Consequently, direct substitution of velocity estimates into the controller results in the deterioration of the control performance and robustness margin. Therefore, this paper proposes a robust position-feedback motion controller which gets rid of the problems of uncompensated dynamics and model uncertainties introduced by velocity estimators. Furthermore, a globally asymptotically stable system, which is robust with respective to model parameter variations, is guaranteed. Theoretical analysis and experimental verifications are carried out. The results demonstrate that the proposed controller is robust and outperforms the conventional computed torque plus proportional integral differential (PID) controller.
Robust Joint Position Feedback Control of Robot Manipulators
Contributed by the Dynamic Systems Division of ASME for publication in the JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT, AND CONTROL. Manuscript received May 25, 2010; final manuscript received December 11, 2012; published online March 28, 2013. Editor: J. Karl Hedrick.
- Views Icon Views
- Share Icon Share
- Search Site
Hsiao, T., and Weng, M. (March 28, 2013). "Robust Joint Position Feedback Control of Robot Manipulators." ASME. J. Dyn. Sys., Meas., Control. May 2013; 135(3): 031010. https://doi.org/10.1115/1.4023669
Download citation file: