Large scale power production benefits from the high efficiency of gas-steam combined cycles. In the lower power range, fuel cells are a good candidate to combine with gas turbines. Such systems can achieve efficiencies exceeding 60%. High-temperature solid oxide fuel cells (SOFC) offer good opportunities for this coupling. In this paper, a systematic method to select a design according to user specifications is presented. The most attractive configurations of this technology coupling are identified using a thermo-economic multi-objective optimization approach. The SOFC model includes detailed computation of losses of the electrodes and thermal management. The system is integrated using pinch based methods. A thermo-economic approach is then used to compute the integrated system performances, size, and cost. This allows to perform the optimization of the system with regard to two objectives: minimize the specific cost and maximize the efficiency. Optimization results prove the existence of designs with costs from for a 44% efficiency to for a 70% efficiency. Several design options are analyzed regarding, among others, fuel processing, pressure ratio, or turbine inlet temperature. The model of a pressurized SOFC– hybrid cycle combines a state-of-the-art planar SOFC with a high-speed micro-gas turbine sustained by air bearings.
Skip Nav Destination
e-mail: nordahl.autissier@epfl.ch
Article navigation
May 2007
This article was originally published in
Journal of Fuel Cell Science and Technology
Research Papers
Thermo-Economic Optimization of a Solid Oxide Fuel Cell, Gas Turbine Hybrid System
N. Autissier,
e-mail: nordahl.autissier@epfl.ch
N. Autissier
Ecole Polytechnique Fédérale de Lausanne (EPFL)
, Laboratory for Industrial Energy Systems (LENI), CH-1015 Lausanne, Switzerland
Search for other works by this author on:
F. Palazzi,
F. Palazzi
Ecole Polytechnique Fédérale de Lausanne (EPFL)
, Laboratory for Industrial Energy Systems (LENI), CH-1015 Lausanne, Switzerland
Search for other works by this author on:
F. Marechal,
F. Marechal
Ecole Polytechnique Fédérale de Lausanne (EPFL)
, Laboratory for Industrial Energy Systems (LENI), CH-1015 Lausanne, Switzerland
Search for other works by this author on:
J. van Herle,
J. van Herle
Ecole Polytechnique Fédérale de Lausanne (EPFL)
, Laboratory for Industrial Energy Systems (LENI), CH-1015 Lausanne, Switzerland
Search for other works by this author on:
D. Favrat
D. Favrat
Ecole Polytechnique Fédérale de Lausanne (EPFL)
, Laboratory for Industrial Energy Systems (LENI), CH-1015 Lausanne, Switzerland
Search for other works by this author on:
N. Autissier
Ecole Polytechnique Fédérale de Lausanne (EPFL)
, Laboratory for Industrial Energy Systems (LENI), CH-1015 Lausanne, Switzerlande-mail: nordahl.autissier@epfl.ch
F. Palazzi
Ecole Polytechnique Fédérale de Lausanne (EPFL)
, Laboratory for Industrial Energy Systems (LENI), CH-1015 Lausanne, Switzerland
F. Marechal
Ecole Polytechnique Fédérale de Lausanne (EPFL)
, Laboratory for Industrial Energy Systems (LENI), CH-1015 Lausanne, Switzerland
J. van Herle
Ecole Polytechnique Fédérale de Lausanne (EPFL)
, Laboratory for Industrial Energy Systems (LENI), CH-1015 Lausanne, Switzerland
D. Favrat
Ecole Polytechnique Fédérale de Lausanne (EPFL)
, Laboratory for Industrial Energy Systems (LENI), CH-1015 Lausanne, SwitzerlandJ. Fuel Cell Sci. Technol. May 2007, 4(2): 123-129 (7 pages)
Published Online: June 15, 2006
Article history
Received:
December 7, 2005
Revised:
June 15, 2006
Citation
Autissier, N., Palazzi, F., Marechal, F., van Herle, J., and Favrat, D. (June 15, 2006). "Thermo-Economic Optimization of a Solid Oxide Fuel Cell, Gas Turbine Hybrid System." ASME. J. Fuel Cell Sci. Technol. May 2007; 4(2): 123–129. https://doi.org/10.1115/1.2714564
Download citation file:
Get Email Alerts
Cited By
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Nitrogen and Phosphorus Co-Doped Hard Carbon Materials as High-Performance Anode for Sodium Ion Batteries
J. Electrochem. En. Conv. Stor (August 2025)
In-situ synthesis nano PtRuW/WC HER catalyst for acid hydrogen evolution by microwave method
J. Electrochem. En. Conv. Stor
Ultrasound-Enabled Adaptive Protocol for Fast Charging of Lithium-Ion Batteries
J. Electrochem. En. Conv. Stor (August 2025)
Related Articles
The Effect of Size on Optimization of Solid Oxide Fuel Cell/Gas Turbine Hybrid Cycles
J. Eng. Gas Turbines Power (September,2010)
Cycle Analysis of Gas Turbine–Fuel Cell Cycle Hybrid Micro Generation System
J. Eng. Gas Turbines Power (October,2004)
Highly Efficient IGFC Hybrid Power Systems Employing Bottoming Organic Rankine Cycles With Optional Carbon Capture
J. Eng. Gas Turbines Power (February,2012)
Design and Off-Design Analysis of a MW Hybrid System Based on Rolls-Royce Integrated Planar Solid Oxide Fuel Cells
J. Eng. Gas Turbines Power (July,2007)
Related Proceedings Papers
Related Chapters
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
An Easy-to-Approach Comprehensive Model and Computation for SOFC Performance and Design Optimization
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)
Control and Operational Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential