A relatively simple, general, and very flexible method to design complex, three-dimensional hole trajectories can be obtained by using a 3D extension for Bézier curves. This approach offers superior results in terms of coding, use, and flexibility compared to other methods using double-arc, cubic functions, spline-in-tension functions, or constant curvature. The mathematics is surprisingly simple, and the method can be used to obtain trajectories for any of the four typical end conditions in terms of inclination and azimuth, namely: free-end, set-end, set-inclination/free azimuth, and free-inclination/set-azimuth. The resulting trajectories are smooth, with continuous and smooth change of curvature and toolface, better exploiting the expected delivery of modern rotary steerable deviation tools, particularly the point-the-bit and the push-the-bit systems. With the relevant parameters at any point of the trajectory (curvature and toolface angle) an automated system can steer the hole toward the defined targets in a smooth fashion. The beauty of the method is that the description of the trajectory is obtained with one single expression that handles the three space coordinates, instead of working with three separate coordinate functions. It uses a generalization of the well-known 2D Bézier curve. The concept is easy to understand, and implementation even using spreadsheets is straightforward. Besides, the conditions at both ends (coordinates and inclination/azimuth for set ends) the trajectory curve has up to two independent parameters. By playing suitably with these parameters, one can obtain a curve that favors the reduction of drag and torque during drilling, tripping, and casing running. In addition to the formulation for trajectory calculation, the paper presents the expressions to calculate the inclination, azimuth, curvature, and toolface at any point along the trajectory. Proper numerical examples illustrate the various end-conditions. The method can be used during the hole planning cycle as well as during the hole drilling for automatic and manual steerage.
Skip Nav Destination
Article navigation
Research-Article
Designing Three-Dimensional Directional Well Trajectories Using Bézier Curves
Jorge H. B. Sampaio, Jr.
Jorge H. B. Sampaio, Jr.
Associate Professor
Petroleum Engineering Department,
College of Earth Resource Sciences and Engineering,
Colorado School of Mines,
1600 Arapahoe Street,
Golden, CO 80401
e-mail: jsampaio@mines.edu
Petroleum Engineering Department,
College of Earth Resource Sciences and Engineering,
Colorado School of Mines,
1600 Arapahoe Street,
Golden, CO 80401
e-mail: jsampaio@mines.edu
Search for other works by this author on:
Jorge H. B. Sampaio, Jr.
Associate Professor
Petroleum Engineering Department,
College of Earth Resource Sciences and Engineering,
Colorado School of Mines,
1600 Arapahoe Street,
Golden, CO 80401
e-mail: jsampaio@mines.edu
Petroleum Engineering Department,
College of Earth Resource Sciences and Engineering,
Colorado School of Mines,
1600 Arapahoe Street,
Golden, CO 80401
e-mail: jsampaio@mines.edu
Contributed by the Petroleum Division of ASME for publication in the JOURNAL OF ENERGY RESOURCES TECHNOLOGY. Manuscript received April 19, 2016; final manuscript received September 21, 2016; published online October 10, 2016. Assoc. Editor: Arash Dahi Taleghani.
J. Energy Resour. Technol. May 2017, 139(3): 032901 (8 pages)
Published Online: October 10, 2016
Article history
Received:
April 19, 2016
Revised:
September 21, 2016
Citation
Sampaio, J. H. B., Jr. (October 10, 2016). "Designing Three-Dimensional Directional Well Trajectories Using Bézier Curves." ASME. J. Energy Resour. Technol. May 2017; 139(3): 032901. https://doi.org/10.1115/1.4034810
Download citation file:
Get Email Alerts
Related Articles
State-of-the-Art Solution of Capacitance Resistance Model by Considering Dynamic Time Constants as a Realistic Assumption
J. Energy Resour. Technol (January,2018)
Intelligent Classifier Approach for Prediction and Sensitivity Analysis of Differential Pipe Sticking: A Comparative Study
J. Energy Resour. Technol (September,2016)
The Shielding Effect of Drilling Fluids on Measurement While Drilling Tool Downhole Compasses—The Effect of Drilling Fluid Composition, Contaminants, and Rheology
J. Energy Resour. Technol (September,2016)
Relative Significance of Multiple Parameters on the Mechanical Specific Energy and Frictional Responses of Polycrystalline Diamond Compact Cutters
J. Energy Resour. Technol (March,2017)
Related Proceedings Papers
Related Chapters
QP-Based Self-Motion Planning
Robot Manipulator Redundancy Resolution
Pseudoinverse Method and Singularities Discussed
Robot Manipulator Redundancy Resolution
Motion Prediction with Gaussian Process Dynamical Models
International Conference on Information Technology and Computer Science, 3rd (ITCS 2011)