...M. B. Alamu; B. J. Azzopardi The mechanism of atomization of part of the liquid film to form drops in annular two-phase flow is not entirely understood. It has been observed that drop creation only occurs when there are large disturbance waves present on the film interface. (Woodmansee...

... stream. The dissolved gas generates bubbles due to the pressure drop when the mixture of produced water and gas passes through a special valve before entering the CFU. The ratio of the inlet produced water flow rate to the DGF pump output rate plays an important role in optimum separation of oil droplets...

... ) and soot concentration results showed lower emissions compared with those of conventional diesel fuel. 04 11 2008 23 11 2010 06 01 2011 06 01 2011 biofuel combustion diesel engines drops exhaust systems Diesel engines have received considerable attention...

... drop and size downstream processing facilities. The most important parameters are pipe geometry (pipe diameter and orientation), physical properties of the gas and liquid (density, viscosity and surface tension) and flow conditions (velocity, temperature and pressure). Stratified flow and annular flow...

.... 01 April 2001 01 May 2002 14 03 2003 oil technology natural gas technology flow separation drops wetting two-phase flow liquids The development of gas liquid cylindrical cyclone separators has had tremendous impact on the oil and gas industry due to their compactness...

..., oil-water interfacial tension) with respect to pressure drop and flow pattern for horizontal flow. The results show significant deviations with respect to pressure drop and flow patterns for two and three-phase flow. This may contribute to the explanation of the discrepancies often revealed between...