Large eddy simulation of flow past a rigid prism of a square cross section with one side facing the oncoming flow at is performed. An incompressible code is used employing an implicit fractional step method finite volume with second-order accuracy in space and time. Three different subgrid scale models: the Smagorinsky, the standard dynamic, and a dynamic one-equation model, are applied. The influence of finer grid, shorter time step, and larger computational spanwise dimension is investigated. Some global quantities, such as the Strouhal number and the mean and rms values of lift and drag, are computed. A scheme for correcting the global results for blockage effects is presented. By comparison with experiments, the results produced by the dynamic one-equation one give better agreement with experiments than the other two subgrid models. [S0098-2202(00)01001-4]
Skip Nav Destination
Article navigation
March 2000
Technical Papers
Large Eddy Simulation of Flow Past a Square Cylinder: Comparison of Different Subgrid Scale Models
Ahmad Sohankar, Assistant Professor,
Ahmad Sohankar, Assistant Professor
Thermo and Fluid Dynamics, Chalmers University of Technology, SE-412 96 Go¨teborg, Sweden
Search for other works by this author on:
L. Davidson, Professor,
L. Davidson, Professor
Thermo and Fluid Dynamics, Chalmers University of Technology, SE-412 96 Go¨teborg, Sweden
Search for other works by this author on:
C. Norberg, Associate Professor
C. Norberg, Associate Professor
Heat and Power Engineering, Lund Institute of Technology, Box 118, SE-221 00 Lund, Sweden
Search for other works by this author on:
Ahmad Sohankar, Assistant Professor
Thermo and Fluid Dynamics, Chalmers University of Technology, SE-412 96 Go¨teborg, Sweden
L. Davidson, Professor
Thermo and Fluid Dynamics, Chalmers University of Technology, SE-412 96 Go¨teborg, Sweden
C. Norberg, Associate Professor
Heat and Power Engineering, Lund Institute of Technology, Box 118, SE-221 00 Lund, Sweden
Contributed by the Fluids Engineering Division for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received by the Fluids Engineering Division March 15, 1999; revised manuscript received November 15, 1999. Associate Technical Editor: J. Eaton.
J. Fluids Eng. Mar 2000, 122(1): 39-47 (9 pages)
Published Online: November 15, 1999
Article history
Received:
March 15, 1999
Revised:
November 15, 1999
Citation
Sohankar, A., Davidson, L., and Norberg, C. (November 15, 1999). "Large Eddy Simulation of Flow Past a Square Cylinder: Comparison of Different Subgrid Scale Models ." ASME. J. Fluids Eng. March 2000; 122(1): 39–47. https://doi.org/10.1115/1.483224
Download citation file:
Get Email Alerts
Related Articles
Erratum: “Large Eddy Simulation of Flow Past a Square Cylinder: Comparison of Different Subgrid Scale Models” [ASME J. Fluids Eng., 122 , No. 1, pp. 39–47]
J. Fluids Eng (September,2000)
Computational Evaluation of the Periodic Performance of a NACA 0012 Fitted With a Gurney Flap
J. Fluids Eng (March,2002)
Partially Averaged Navier–Stokes (PANS) Method for Turbulence Simulations: Flow Past a Circular Cylinder
J. Fluids Eng (December,2010)
Shape Optimization of a Multi-Element Foil Using an Evolutionary Algorithm
J. Fluids Eng (May,2010)
Related Proceedings Papers
Related Chapters
Vortex-Induced Vibration
Flow Induced Vibration of Power and Process Plant Components: A Practical Workbook
Cavitating Structures at Inception in Turbulent Shear Flow
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Introduction
Design and Analysis of Centrifugal Compressors