An experimental study was undertaken to investigate the effects of roughness on the structure of turbulent boundary layers in open channels. The study was carried out using a laser Doppler anemometer in shallow flows for three different types of rough surface, as well as a hydraulically smooth surface. The flow Reynolds number based on the boundary layer momentum thickness ranged from 1400 to 4000. The boundary layer thickness was comparable with the depth of flow and the turbulence intensity in the channel flow varied from 2 to 4 percent. The defect profile was correlated using an approach which allowed both the skin friction and wake strength to vary. The wake parameter was observed to vary significantly with the type of surface roughness in contradiction to the “wall similarity” hypothesis. Wall roughness also led to higher turbulence levels in the outer region of the boundary layer. The profound effect of surface roughness on the outer region as well as the effect of channel turbulence on the main flow indicates a strong interaction, which must be accounted for in turbulence models. [S0098-2202(00)00803-8]
Skip Nav Destination
Article navigation
September 2000
Technical Papers
Rough Wall Turbulent Boundary Layers in Shallow Open Channel Flow
M. F. Tachie, Research Assistant,,
M. F. Tachie, Research Assistant,
Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, Canada S7N 5A9
Search for other works by this author on:
D. J. Bergstrom, Professor,,
D. J. Bergstrom, Professor,
Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, Canada S7N 5A9
Search for other works by this author on:
R. Balachandar, Associate Professor,
R. Balachandar, Associate Professor,
Department of Civil Engineering, University of Saskatchewan, Saskatoon, Canada S7N 5A9
Search for other works by this author on:
M. F. Tachie, Research Assistant,
Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, Canada S7N 5A9
D. J. Bergstrom, Professor,
Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, Canada S7N 5A9
R. Balachandar, Associate Professor,
Department of Civil Engineering, University of Saskatchewan, Saskatoon, Canada S7N 5A9
Contributed by the Fluids Engineering Division for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received by the Fluids Engineering Division March 23, 1999; revised manuscript received February 14, 2000. Associate Technical Editor: D. Williams.
J. Fluids Eng. Sep 2000, 122(3): 533-541 (9 pages)
Published Online: February 14, 2000
Article history
Received:
March 23, 1999
Revised:
February 14, 2000
Citation
Tachie, M. F., Bergstrom, D. J., and Balachandar, R. (February 14, 2000). "Rough Wall Turbulent Boundary Layers in Shallow Open Channel Flow ." ASME. J. Fluids Eng. September 2000; 122(3): 533–541. https://doi.org/10.1115/1.1287267
Download citation file:
Get Email Alerts
Related Articles
A Study on Turbulent Boundary Layers on a Smooth Flat Plate in an Open Channel
J. Fluids Eng (June,2001)
Roughness Effects on the Mixing Properties in Open Channel Turbulent Boundary Layers
J. Fluids Eng (November,2004)
Skin Friction Correlation in Open Channel Boundary Layers
J. Fluids Eng (December,2001)
Power Law Velocity Profile in the Turbulent Boundary Layer on Transitional Rough Surfaces
J. Fluids Eng (August,2007)
Related Proceedings Papers
Related Chapters
Fluidelastic Instability of Tube Bundles in Single-Phase Flow
Flow-Induced Vibration Handbook for Nuclear and Process Equipment
Random Turbulence Excitation in Single-Phase Flow
Flow-Induced Vibration Handbook for Nuclear and Process Equipment
Other Components and Variations
Axial-Flow Compressors