A theoretical investigation has been conducted for the prediction of the critical height at the onset of gas entrainment during single discharge from a stratified, two-phase region through a side branch with a finite diameter. Two different models have been developed, a simplified point-sink model and a three-dimensional finite-branch model. The two models are based on a new criterion for the onset of gas entrainment. The results of the predicted critical heights at the onset of gas entrainment showed that the finite-branch model approaches the physical limits at low Froude numbers. However, as the values of the Froude number increased, the predictions of both models eventually converged to the same value. Based on the results of the models, the critical height corresponding to the onset of gas entrainment was found to be a function of Froude number and fluid densities. The results of both models are compared with available experimental data. The comparisons illustrate a very good agreement between the measured and predicted values.
Skip Nav Destination
e-mail: hassan@me.Concordia.ca
Article navigation
September 2003
Technical Papers
Modeling of the Onset of Gas Entrainment Through a Finite-Side Branch
M. Ahmed,
M. Ahmed
Department of Mechanical and Industrial Engineering, Concordia University, Montreal, Quebec H3G 1M8, Canada
Search for other works by this author on:
I. Hassan,
e-mail: hassan@me.Concordia.ca
I. Hassan
Department of Mechanical and Industrial Engineering, Concordia University, Montreal, Quebec H3G 1M8, Canada
Search for other works by this author on:
N. Esmail
N. Esmail
Department of Mechanical and Industrial Engineering, Concordia University, Montreal, Quebec H3G 1M8, Canada
Search for other works by this author on:
M. Ahmed
Department of Mechanical and Industrial Engineering, Concordia University, Montreal, Quebec H3G 1M8, Canada
I. Hassan
Department of Mechanical and Industrial Engineering, Concordia University, Montreal, Quebec H3G 1M8, Canada
e-mail: hassan@me.Concordia.ca
N. Esmail
Department of Mechanical and Industrial Engineering, Concordia University, Montreal, Quebec H3G 1M8, Canada
Contributed by the Fluids Engineering Division for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received by the Fluids Engineering Division Feb. 1, 2002; revised manuscript received Mar. 27, 2003. Associate Editor: Y. Matsumoto.
J. Fluids Eng. Sep 2003, 125(5): 902-909 (8 pages)
Published Online: October 7, 2003
Article history
Received:
February 1, 2002
Revised:
March 27, 2003
Online:
October 7, 2003
Citation
Ahmed, M., Hassan, I., and Esmail, N. (October 7, 2003). "Modeling of the Onset of Gas Entrainment Through a Finite-Side Branch ." ASME. J. Fluids Eng. September 2003; 125(5): 902–909. https://doi.org/10.1115/1.1601256
Download citation file:
Get Email Alerts
Related Articles
Modeling of the Onset of Gas Entrainment From a Stratified Two-Phase Region Through Branches on a Curved Surface
J. Fluids Eng (July,2006)
A Coupled Map Lattice Model of Flow Boiling in a Horizontal Tube
J. Heat Transfer (December,2007)
Numerical Analysis of Thermal Stratification in a Circular Pipe
J. Pressure Vessel Technol (November,2001)
Lock-Exchange Flows in Non-Rectangular Cross-Section Channels
J. Fluids Eng (March,2004)
Related Chapters
The ‘Regenerator Problem’
Air Engines: The History, Science, and Reality of the Perfect Engine
Pool Boiling
Thermal Management of Microelectronic Equipment, Second Edition
Aerodynamic Performance Analysis
Axial-Flow Compressors