Many centrifugal pumps have a suction velocity profile, which is nonuniform, either by design like in double-suction pumps, sump pumps, and in-line pumps, or as a result of an installation close to an upstream disturbance like a pipe bend. This paper presents an experimental study on the effect of a nonuniform suction velocity profile on performance of a mixed-flow pump and hydrodynamic forces on the impeller. In the experiments, a newly designed dynamometer is used, equipped with six full Wheatstone bridges of strain gauges to measure the six generalized force components. It is placed in between the shaft of the pump and the impeller and corotates with the rotor system. A high accuracy is obtained due to the orthogonality of bridge positioning and the signal conditioning electronics embedded within the dynamometer. The suction flow distribution to the pump is adapted using a pipe bundle situated in the suction pipe. Results of measurements show the influence of the suction flow profile and blade interaction on pump performance and forces. Among the most important observations are a backward whirling motion of the rotor system and a considerable steady radial force.
Issue Section:
Flows in Complex Systems
1.
Ehrich
, F. F.
, and Childs
, D. W.
, 1984, “Self-Excited Vibrations in High Performance Turbomachinery
,” Mech. Eng. (Am. Soc. Mech. Eng.)
0025-6501, 106
, pp. 66
–79
.2.
Agostinelli
, A.
, Nobles
, D.
, and Mockridge
, C. R.
, 1960, “An Experimental Investigation of Radial Thrust in Centrifugal Pumps
,” ASME J. Eng. Power
0022-0825, 82
, pp. 120
–126
.3.
Iversen
, H. W.
, Rolling
, R. E.
, and Carlson
, J. J.
, 1960, “Volute Pressure Distribution, Radial Force on the Impeller and Volute Mixing Losses of a Radial Flow Centrifugal Pump
,” ASME J. Eng. Power
0022-0825, 82
, pp. 136
–144
.4.
Domm
, U.
, and Hergt
, P.
, 1970, Radial Forces on Impeller of Volute Casing Pumps, Flow Research on Blading
, L. S.
Dzung
, ed., Elsevier
, Netherlands
, pp. 305
–321
.5.
Hergt
, P.
, and Krieger
, P.
, 1969, “Radial Forces in Centrifugal Pumps With Guide Vanes
,” Proc. Inst. Mech. Eng.
0020-3483, 184
, pp. 101
–107
.6.
Uchida
, N.
, Imaichi
, K.
, and Shirai
, T.
, 1971, “Radial Force on the Impeller of a Centrifugal Pump
,” Bull. JSME
0021-3764, 14
, pp. 1106
–1117
.7.
Chamieh
, D.
, Acosta
, D. S.
, Brennen
, C. E.
, and Caughey
, T. K.
, 1985, “Experimental Measurements of Hydrodynamic Radial Forces and Stiffness Matrices for Centrifugal Pump Impeller
,” ASME J. Fluids Eng.
0098-2202, 107
(3
), pp. 307
–315
.8.
Jerry
, B.
, Acosta
, A. J.
, Brennen
, C. E.
, and Caughey
, T. K.
, 1985, “Forces on Centrifugal Pump Impellers
,” Proceedings of the second International Pump Symposium
, Houston, TX
, Apr. 30–May 2.9.
Guinzburg
, A.
, Brennen
, C. E.
, Acosta
, A. J.
, and Caughey
, T.
, 1993, “The Effect of Inlet Swirl on the Rotordynamic Shroud Forces in a Centrifugal Pump
,” ASME J. Eng. Gas Turbines Power
0742-4795, 115
, pp. 287
–293
.10.
Uy
, R. V.
, and Brennen
, C. E.
, 1999, “Experimental Measurements of Rotordynamic Forces Caused by Front Shroud Pump Leakage
,” ASME J. Fluids Eng.
0098-2202, 121
, pp. 633
–637
.11.
Hsu
, Y.
, and Brennen
, C. E.
, 2002, “Effect of Swirl on Rotordynamic Forces Caused by Front Shroud Pump Leakage
,” ASME J. Fluids Eng.
0098-2202, 124
, pp. 1005
–1010
.12.
Ohashi
, H.
, Imai
, H.
, and Tsuchihashi
, T.
, 1991, “Fluid Force and Moment on Centrifugal Impellers in Precessing Motion
,” ASME FED Fluid Machinery Forum
, Vol. 119
(3
), Portland, OR, pp. 57
–60
.13.
Yoshida
, Y.
, Tsujimoto
, Y.
, Ohashi
, H.
, and Kano
, F.
, 1999, “The Rotordynamic Forces on an Open-Type Centrifugal Compressor Impeller in Whirling Motion
,” ASME J. Fluids Eng.
0098-2202, 121
, pp. 259
–265
.14.
Yoshida
, Y.
, Tsujimoto
, Y.
, Yokoyama
, D.
, Ohashi
, H.
, and Kano
, F.
, 2001, “Rotordynamic Fluid Force Moments on an Open-Type Centrifugal Compressor Impeller in Precessing Motion
,” Int. J. Rotating Mach.
1023-621X, 7
, pp. 237
–251
.15.
Yoshida
, Y.
, Tsujimoto
, Y.
, Morimoto
, G.
, Nishida
, H.
, and Morii
, S.
, 2003, “Effects of Seal Geometry on Dynamic Impeller Fluid Forces and Moments
,” ASME J. Fluids Eng.
0098-2202, 125
, pp. 786
–795
.16.
Suzuki
, T.
, Prunières
, R.
, Horiguchi
, H.
, Tsukiya
, T.
, Taenaka
, Y.
, and Tsujimoto
, Y.
, 2007, “Measurements of Rotordynamic Forces on an Artificial Heart Pump Impeller
,” ASME J. Fluids Eng.
0098-2202, 129
, pp. 1422
–1427
.17.
Toyokura
, T.
, 1961, “Studies on the Characteristics of Axial-Flow Pumps
,” Bull. JSME
0021-3764, 4
, pp. 287
–340
.18.
Badowski
, H. R.
, 1970, “Inducers for Centrifugal Pumps
,” Worthington Canada, Ltd.
, Internal Report.19.
Del Valle
, D.
, Braisted
, D. M.
, and Brennen
, C. E.
, 1992, “The Effects of Inlet Flow Modification on Cavitating Inducer Performance
,” ASME J. Fluids Eng.
0098-2202, 114
, pp. 360
–365
.20.
Bolleter
, U.
, Leibundgut
, E.
, Sturchler
, R.
, and McCloskey
, T.
, 1989, “Hydraulic Interaction and Excitation Forces of High Head Pump Impellers
,” Joint ASCE/ASME Pumping Machinery Symposium
, San Diego, CA
, pp. 187
–193
.21.
Fujii
, A.
, Azuma
, S.
, Yoshida
, Y.
, Tsujimoto
, Y.
, and Laffite
, S.
, 2002, “Unsteady Stress of 4-Bladed Inducer Blades and the Effect of Inlet Flow Distortion
,” JSME Int. J., Ser. B
1340-8054, 45
, pp. 47
–54
.22.
Seil
, G. J.
, Fletcher
, C. A.
, and Doctors
, L. J.
, 1995, “The Application of Computational Fluid Dynamics to Practical Waterjet Propulsion System Design and Analysis
,” Proceedings FAST’95
, pp. 1379
–1389
.23.
Verbeek
, R.
, and Bulten
, N. W. H.
, 1998, “Recent Developments in Waterjet Design
,” Proceedings Rina Waterjet Propulsion Conference
, Amsterdam
.24.
Brandner
, P.
, and Walker
, G. J.
, 2001, “A Waterjet Test Loop for the Tom Fink Cavitation Tunnel
,” Proceedings Waterjet Propulsion III Conference
, Gothernburg
.25.
Bulten
, N. W. H.
, Verbeek
, R.
, and van Esch
, B. P. M.
, 2006, “CFD Simulations of the Flow Through a Waterjet Installation
,” Int. J. Marit. Eng.
1479-8751, 148
, pp. 23
–33
.26.
Kotansky
, D. R.
, 1966, “The Use of Honeycomb for Shear Flow Generation
,” AIAA J.
0001-1452, 4
, pp. 1490
–1491
.27.
Bulten
, N. W. H.
, and van Esch
, B. P. M.
, 2007, “Fully Transient CFD Analyses of Waterjet Pumps
,” Marine Technology
, Vol. 44
(3
), pp. 185
–193
, Society of Naval Architects and Marine Engineers (SNAME).28.
Gülich
, J. F.
, 1999, Kreiselpumpen—Ein Handbuch für Entwicklung, Anlageplanung und Betrieb
, Springer-Verlag
, Berlin
.29.
Dubas
, M.
, 1984, “Über die Erregung infolge der Periodizität von Turbomachinen
,” Ing.-Arch.
0020-1154, 54
, pp. 413
–426
.30.
Brennen
, C. E.
, 1994, Hydrodynamics of Pumps
, Oxford University Press
, Oxford
.Copyright © 2009
by American Society of Mechanical Engineers
You do not currently have access to this content.
