Pilot-control globe valve (PCGV) can use the pressure drop caused by fluid flowing through the orifice located at valve core bottom to open or close the main valve using a small pilot valve. In this paper, computational fluid dynamics (CFD) method is adopted to analyze the pressure drop before and after valve core of PCGV and minor loss of orifice under different structural parameters and inlet velocities, and the simulation results show a good agreement with the experimental results. It turns out that the valve diameters, orifice diameters, and pilot pipe diameters have great influences on the pressure drop and the loss coefficient. Moreover, an expression is proposed which can be used to calculate minor loss coefficient, then to estimate the pressure drop and driving force of a PCGV within limited conditions. This paper can be referenced as guidance for deciding the dimension of structural parameters and spring stiffness during design process of a PCGV.
Skip Nav Destination
Article navigation
September 2017
Research-Article
Pressure Drop Analysis of Pilot-Control Globe Valve With Different Structural Parameters
Zhi-xin Gao,
Zhi-xin Gao
Institute of Process Equipment,
Zhejiang University,
Hangzhou 310027, China
e-mail: zhixingao@foxmail.com
Zhejiang University,
Hangzhou 310027, China
e-mail: zhixingao@foxmail.com
Search for other works by this author on:
Jin-yuan Qian
Jin-yuan Qian
Institute of Process Equipment;
State Key Laboratory of Fluid
Power and Mechatronic Systems,
Zhejiang University,
Hangzhou 310027, China;
Power and Mechatronic Systems,
Zhejiang University,
Hangzhou 310027, China;
Department of Energy Sciences,
Lund University,
Lund SE-22100, Sweden
e-mails: qianjy@zju.edu.cn;
jin-yuan.qian@energy.lth.se
Lund University,
Lund SE-22100, Sweden
e-mails: qianjy@zju.edu.cn;
jin-yuan.qian@energy.lth.se
Search for other works by this author on:
Zhi-jiang Jin
Zhi-xin Gao
Institute of Process Equipment,
Zhejiang University,
Hangzhou 310027, China
e-mail: zhixingao@foxmail.com
Zhejiang University,
Hangzhou 310027, China
e-mail: zhixingao@foxmail.com
Ming Zhang
Jin-yuan Qian
Institute of Process Equipment;
State Key Laboratory of Fluid
Power and Mechatronic Systems,
Zhejiang University,
Hangzhou 310027, China;
Power and Mechatronic Systems,
Zhejiang University,
Hangzhou 310027, China;
Department of Energy Sciences,
Lund University,
Lund SE-22100, Sweden
e-mails: qianjy@zju.edu.cn;
jin-yuan.qian@energy.lth.se
Lund University,
Lund SE-22100, Sweden
e-mails: qianjy@zju.edu.cn;
jin-yuan.qian@energy.lth.se
1Corresponding author.
Contributed by the Fluids Engineering Division of ASME for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received January 11, 2017; final manuscript received March 3, 2017; published online June 7, 2017. Assoc. Editor: Riccardo Mereu.
J. Fluids Eng. Sep 2017, 139(9): 091102 (12 pages)
Published Online: June 7, 2017
Article history
Received:
January 11, 2017
Revised:
March 3, 2017
Citation
Jin, Z., Gao, Z., Zhang, M., and Qian, J. (June 7, 2017). "Pressure Drop Analysis of Pilot-Control Globe Valve With Different Structural Parameters." ASME. J. Fluids Eng. September 2017; 139(9): 091102. https://doi.org/10.1115/1.4036268
Download citation file:
Get Email Alerts
Related Articles
An Attempt to Scale the Vibrations of Water Pipes
J. Pressure Vessel Technol (November,2006)
Optimization of Loads in Piping Systems by the Realistic Calculation Method Applying Fluid-Structure-Interaction (FSI) and Dynamic Friction
J. Pressure Vessel Technol (February,2005)
The Application of System CFD to the Design and Optimization of High-Temperature Gas-Cooled Nuclear Power Plants
J. Eng. Gas Turbines Power (May,2008)
Simulation of Structural Deformations of Flexible Piping Systems by Acoustic Excitation
J. Pressure Vessel Technol (August,2007)
Related Proceedings Papers
Related Chapters
Basics of Hydraulic Loops
Hydraulics, Pipe Flow, Industrial HVAC & Utility Systems: Mister Mech Mentor, Vol. 1
Extended-Surface Metallurgy
Heat Exchanger Engineering Techniques
Adding Surface While Minimizing Downtime
Heat Exchanger Engineering Techniques