Skip Nav Destination
Issues
March 1960
This article was originally published in
Journal of Basic Engineering
ISSN 0021-9223
In this Issue
Research Papers
Cavitation Effect on the Discharge Coefficient of the Sharp-Edged Orifice Plate
J. Basic Eng. March 1960, 82(1): 1–6.
doi: https://doi.org/10.1115/1.3662523
Topics:
Cavitation
,
Discharge coefficient
,
Errors
,
Noise (Sound)
,
Plates (structures)
,
Vibration
Measurement of Oil-Film Thickness Between Disks by Electrical Conductivity
J. Basic Eng. March 1960, 82(1): 12–16.
doi: https://doi.org/10.1115/1.3662499
Topics:
Disks
,
Electrical conductivity
,
Gear teeth
,
Lubricants
,
Machinery
,
Petroleum
,
Rotating disks
,
Sodium
,
Temperature
,
Testing
Performance Characteristics of Lubricating Oil Film Between Rotating Disks
J. Basic Eng. March 1960, 82(1): 19–28.
doi: https://doi.org/10.1115/1.3662522
Topics:
Lubricating oils
,
Performance characterization
,
Rotating disks
,
Disks
,
Gear teeth
,
Gears
,
Lubricants
,
Lubrication
,
Machinery
,
Testing
The Measurement of Oil-Film Thickness in Gear Teeth
J. Basic Eng. March 1960, 82(1): 29–34.
doi: https://doi.org/10.1115/1.3662549
Topics:
Gear teeth
,
Disks
,
Gears
,
Stress
,
Viscosity
A New Approach to Linear Filtering and Prediction Problems
J. Basic Eng. March 1960, 82(1): 35–45.
doi: https://doi.org/10.1115/1.3662552
Topics:
Filtration
,
Filters
,
Stochastic processes
,
Dynamic systems
,
Errors
,
Noise (Sound)
,
Statistics
Shannon’s Theory and Feedback Systems
J. Basic Eng. March 1960, 82(1): 46–50.
doi: https://doi.org/10.1115/1.3662553
Topics:
Feedback
,
Control systems
,
Transfer functions
Dynamic Response and Control of Multipass Heat Exchangers
J. Basic Eng. March 1960, 82(1): 51–60.
doi: https://doi.org/10.1115/1.3662554
Bang-Bang Versus Linear Control of a Second-Order Rate-Type Servomotor
J. Basic Eng. March 1960, 82(1): 66–72.
doi: https://doi.org/10.1115/1.3662557
Topics:
Servomotors
,
Limit cycles
,
Errors
,
Frequency response
,
Function approximation
,
Linear systems
,
Signals
The Design and Analysis of a Servovalve With Flow Feedback
J. Basic Eng. March 1960, 82(1): 73–80.
doi: https://doi.org/10.1115/1.3662559
Topics:
Design
,
Feedback
,
Flow (Dynamics)
,
Valves
,
Signals
,
Dynamic analysis
,
Flowmeters
,
Pressure
,
Stress
A Thermocouple System for Measuring Turbine-Inlet Temperatures
J. Basic Eng. March 1960, 82(1): 81–86.
doi: https://doi.org/10.1115/1.3662560
Topics:
Temperature
,
Thermocouples
,
Turbines
,
Aircraft
,
Alloys
,
Combustion
,
Design
,
Dimensions
,
Engines
,
Insulation
Estimating the Roots of the Characteristic Determinant for Multicoupled Systems
J. Basic Eng. March 1960, 82(1): 87–95.
doi: https://doi.org/10.1115/1.3662561
Topics:
Damping
,
Theorems (Mathematics)
Human Body as an Inconstant Heat Source and Its Relation to Determination of Clothes Insulation: Part 1—Descriptive Models of the Heat Source
J. Basic Eng. March 1960, 82(1): 96–102.
doi: https://doi.org/10.1115/1.3662562
Topics:
Heat
,
Insulation
,
Equilibrium (Physics)
,
Degrees of freedom
,
Oscillations
,
Thermal energy
,
Thermal resistance
Human Body as an Inconstant Heat Source and Its Relation to Clothes Insulation: Part 2—Experimental Investigation Into Dynamics of the Source
J. Basic Eng. March 1960, 82(1): 103–112.
doi: https://doi.org/10.1115/1.3662494
Topics:
Dynamics (Mechanics)
,
Heat
,
Insulation
,
Equilibrium (Physics)
,
Cycles
,
Errors
,
Feedback
,
Oscillations
,
Signals
,
Thermal energy
Some General Considerations in Process Optimization
J. Basic Eng. March 1960, 82(1): 113–119.
doi: https://doi.org/10.1115/1.3662496
Ejector-Nozzle Flow and Thrust
J. Basic Eng. March 1960, 82(1): 120–129.
doi: https://doi.org/10.1115/1.3662497
Topics:
Ejectors
,
Flow (Dynamics)
,
Nozzles
,
Thrust
,
Momentum
,
Temperature
,
Turbulence
Pressure Losses in Smooth Pipe Bends
J. Basic Eng. March 1960, 82(1): 131–140.
doi: https://doi.org/10.1115/1.3662501
Topics:
Pipe bends
,
Pressure
,
Design
,
Turbulence
Discharge Coefficients and Steady-State Flow Forces for Hydraulic Poppet Valves
J. Basic Eng. March 1960, 82(1): 144–154.
doi: https://doi.org/10.1115/1.3662504
Topics:
Discharge coefficient
,
Flow (Dynamics)
,
Steady state
,
Valves
,
Electromagnetic scattering
Crossover Systems Between the Stages of Centrifugal Compressors
J. Basic Eng. March 1960, 82(1): 155–167.
doi: https://doi.org/10.1115/1.3662505
Topics:
Compressors
,
Design
,
Annulus
,
Diffusers
The Inception of Cavitation on Isolated Surface Irregularities
J. Basic Eng. March 1960, 82(1): 169–183.
doi: https://doi.org/10.1115/1.3662508
Topics:
Cavitation
,
Surface roughness
,
Boundary layers
,
Shapes
,
Boundary layer turbulence
,
Cross section (Physics)
,
Flow (Dynamics)
,
Pressure
,
Water tunnels
,
Weapons
Indentation of Metals by Cavitation
J. Basic Eng. March 1960, 82(1): 184–192.
doi: https://doi.org/10.1115/1.3662513
Topics:
Cavitation
,
Metals
,
Absorption
,
Brittleness
,
Bubbles
,
Collapse
,
Damage
,
Erosion
,
High temperature
,
Metal surfaces
A Shock-Tube Technique to Determine Steady-Flow Losses of Orifices and Other Duct Elements
J. Basic Eng. March 1960, 82(1): 195–200.
doi: https://doi.org/10.1115/1.3662521
Topics:
Ducts
,
Flow (Dynamics)
,
Orifices
,
Shock tubes
,
Discharge coefficient
,
Pressure measurement
,
Valves
Separation Prediction for Conical Diffusers
J. Basic Eng. March 1960, 82(1): 201–207.
doi: https://doi.org/10.1115/1.3662524
Topics:
Diffusers
,
Separation (Technology)
,
Momentum
,
Boundary layers
,
Flow (Dynamics)
,
Reynolds number
,
Turbulence
Unsteady Transfer of Momentum and Heat Between Concentric Cylinders
J. Basic Eng. March 1960, 82(1): 210–215.
doi: https://doi.org/10.1115/1.3662529
Topics:
Cylinders
,
Heat
,
Momentum
,
Boundary-value problems
,
Diffusion (Physics)
,
Fluids
,
Fourier analysis
,
Heat conduction
,
Lubrication
,
Shear (Mechanics)
Chamber Dimension Effects on Induced Flow and Frictional Resistance of Enclosed Rotating Disks
J. Basic Eng. March 1960, 82(1): 217–230.
doi: https://doi.org/10.1115/1.3662532
Topics:
Dimensions
,
Flow (Dynamics)
,
Friction
,
Rotating disks
,
Skin friction (Fluid dynamics)
,
Disks
,
Boundary layers
,
Clearances (Engineering)
,
Pressure
,
Rotation
On the Three-Dimensional Turbulent Boundary Layer Generated by Secondary Flow
J. Basic Eng. March 1960, 82(1): 233–246.
doi: https://doi.org/10.1115/1.3662539
Topics:
Boundary layer turbulence
,
Flow (Dynamics)
,
Boundary layers
,
Cross-flow
,
Momentum
Discussions
Closure to “Discussion of ‘Cavitation Effect on the Discharge Coefficient of the Sharp-Edged Orifice Plate’” (1960, ASME J. Basic Eng., 82, pp. 6–10)
J. Basic Eng. March 1960, 82(1): 10–11.
doi: https://doi.org/10.1115/1.3662495
Topics:
Cavitation
,
Discharge coefficient
Discussion: “Measurement of Oil-Film Thickness Between Disks by Electrical Conductivity” (El-Sisi, S. I., and Shawki, G. S. A., 1960, ASME J. Basic Eng., 82, pp. 12–16)
J. Basic Eng. March 1960, 82(1): 16–17.
doi: https://doi.org/10.1115/1.3662509
Topics:
Disks
,
Electrical conductivity
Discussion: “Measurement of Oil-Film Thickness Between Disks by Electrical Conductivity” (El-Sisi, S. I., and Shawki, G. S. A., 1960, ASME J. Basic Eng., 82, pp. 12–16)
J. Basic Eng. March 1960, 82(1): 17–18.
doi: https://doi.org/10.1115/1.3662512
Topics:
Disks
,
Electrical conductivity
Closure to “Discussions of ‘Measurement of Oil-Film Thickness Between Disks by Electrical Conductivity’” (1960, ASME J. Basic Eng., 82, pp. 16–18)
J. Basic Eng. March 1960, 82(1): 18.
doi: https://doi.org/10.1115/1.3662514
Topics:
Disks
Closure to “Discussion of ‘Performance Characteristics of Lubricating Oil Film Between Rotating Disks’” (1960, ASME J. Basic Eng., 82, p. 28)
J. Basic Eng. March 1960, 82(1): 28.
doi: https://doi.org/10.1115/1.3662548
Topics:
Lubricating oils
,
Performance characterization
Discussion: “The Measurement of Oil-Film Thickness in Gear Teeth” (MacConochie, I. O., and Cameron, A., 1960, ASME J. Basic Eng., 82, pp. 29–34)
J. Basic Eng. March 1960, 82(1): 34.
doi: https://doi.org/10.1115/1.3662550
Topics:
Gear teeth
Closure to “Discussion of ‘The Measurement of Oil-Film Thickness in Gear Teeth’” (1960, ASME J. Basic Eng., 82, p. 34)
J. Basic Eng. March 1960, 82(1): 34.
doi: https://doi.org/10.1115/1.3662551
Topics:
Gears
Discussion: “Dynamic Response and Control of Multipass Heat Exchangers” (Masubuchi, Masami, 1960, ASME J. Basic Eng., 82, pp. 51–60)
J. Basic Eng. March 1960, 82(1): 60–65.
doi: https://doi.org/10.1115/1.3662555
Topics:
Dynamic response
,
Heat exchangers
Closure to “Discussion of ‘Dynamic Response and Control of Multipass Heat Exchangers’” (1960, ASME J. Basic Eng., 82, pp. 60–65)
J. Basic Eng. March 1960, 82(1): 65.
doi: https://doi.org/10.1115/1.3662556
Topics:
Dynamic response
,
Heat
Discussion: “Ejector-Nozzle Flow and Thrust” (Weber, H. E., 1960, ASME J. Basic Eng., 82, pp. 120–129)
J. Basic Eng. March 1960, 82(1): 129–130.
doi: https://doi.org/10.1115/1.3662498
Topics:
Ejectors
,
Flow (Dynamics)
,
Nozzles
,
Thrust
Closure to “Discussion of ‘Ejector-Nozzle Flow and Thrust’” (1960, ASME J. Basic Eng., 82, pp. 129–130)
J. Basic Eng. March 1960, 82(1): 130.
doi: https://doi.org/10.1115/1.3662500
Topics:
Ejectors
,
Flow (Dynamics)
,
Nozzles
Discussion: “Pressure Losses in Smooth Pipe Bends” (Ito¯, H., 1960, ASME J. Basic Eng., 82, pp. 131–140)
J. Basic Eng. March 1960, 82(1): 140–142.
doi: https://doi.org/10.1115/1.3662502
Topics:
Pipe bends
,
Pressure
Closure to “Discussion of ‘Pressure Losses in Smooth Pipe Bends’” (1960, ASME J. Basic Eng., 82, pp. 140–142)
J. Basic Eng. March 1960, 82(1): 142–143.
doi: https://doi.org/10.1115/1.3662503
Discussion: “Crossover Systems Between the Stages of Centrifugal Compressors” (Ellis, Gaylord O., 1960, ASME J. Basic Eng., 82, pp. 155–167)
J. Basic Eng. March 1960, 82(1): 167–168.
doi: https://doi.org/10.1115/1.3662506
Topics:
Compressors
Closure to “Discussion of ‘Crossover Systems Between the Stages of Centrifugal Compressors’” (1960, ASME J. Basic Eng., 82, pp. 167–168)
J. Basic Eng. March 1960, 82(1): 168.
doi: https://doi.org/10.1115/1.3662507
Discussion: “Indentation of Metals by Cavitation” (Wheeler, W. H., 1960, ASME J. Basic Eng., 82, pp. 184–192)
J. Basic Eng. March 1960, 82(1): 192–193.
doi: https://doi.org/10.1115/1.3662515
Topics:
Cavitation
,
Metals
Discussion: “Indentation of Metals by Cavitation” (Wheeler, W. H., 1960, ASME J. Basic Eng., 82, pp. 184–192)
J. Basic Eng. March 1960, 82(1): 193.
doi: https://doi.org/10.1115/1.3662516
Topics:
Cavitation
,
Metals
Discussion: “Indentation of Metals by Cavitation” (Wheeler, W. H., 1960, ASME J. Basic Eng., 82, pp. 184–192)
J. Basic Eng. March 1960, 82(1): 193.
doi: https://doi.org/10.1115/1.3662517
Topics:
Cavitation
,
Metals
Discussion: “Indentation of Metals by Cavitation” (Wheeler, W. H., 1960, ASME J. Basic Eng., 82, pp. 184–192)
J. Basic Eng. March 1960, 82(1): 193.
doi: https://doi.org/10.1115/1.3662518
Topics:
Cavitation
,
Metals
Discussion: “Indentation of Metals by Cavitation” (Wheeler, W. H., 1960, ASME J. Basic Eng., 82, pp. 184–192)
J. Basic Eng. March 1960, 82(1): 193–194.
doi: https://doi.org/10.1115/1.3662519
Topics:
Cavitation
,
Metals
Closure to “Discussions of ‘Indentation of Metals by Cavitation’” (1960, ASME J. Basic Eng., 82, pp. 192–194)
J. Basic Eng. March 1960, 82(1): 194.
doi: https://doi.org/10.1115/1.3662520
Topics:
Metals
Discussion: “Separation Prediction for Conical Diffusers” (Robertson, James M., and Fraser, Harvey R., 1960, ASME J. Basic Eng., 82, pp. 201–207)
J. Basic Eng. March 1960, 82(1): 207.
doi: https://doi.org/10.1115/1.3662525
Topics:
Diffusers
,
Separation (Technology)
Discussion: “Separation Prediction for Conical Diffusers” (Robertson, James M., and Fraser, Harvey R., 1960, ASME J. Basic Eng., 82, pp. 201–207)
J. Basic Eng. March 1960, 82(1): 207–208.
doi: https://doi.org/10.1115/1.3662526
Topics:
Diffusers
,
Separation (Technology)
Discussion: “Separation Prediction for Conical Diffusers” (Robertson, James M., and Fraser, Harvey R., 1960, ASME J. Basic Eng., 82, pp. 201–207)
J. Basic Eng. March 1960, 82(1): 208.
doi: https://doi.org/10.1115/1.3662527
Topics:
Diffusers
,
Separation (Technology)
Closure to “Discussions of ‘Separation Prediction for Conical Diffusers’” (1960, ASME J. Basic Eng., 82, pp. 207–208)
J. Basic Eng. March 1960, 82(1): 208–209.
doi: https://doi.org/10.1115/1.3662528
Topics:
Separation (Technology)
Discussion: “Unsteady Transfer of Momentum and Heat Between Concentric Cylinders” (Yih, Chia-Shun, 1960, ASME J. Basic Eng., 82, pp. 210–215)
J. Basic Eng. March 1960, 82(1): 215.
doi: https://doi.org/10.1115/1.3662530
Closure to “Discussion of ‘Unsteady Transfer of Momentum and Heat Between Concentric Cylinders’” (1960, ASME J. Basic Eng., 82, p. 215)
J. Basic Eng. March 1960, 82(1): 216.
doi: https://doi.org/10.1115/1.3662531
Discussion: “Chamber Dimension Effects on Induced Flow and Frictional Resistance of Enclosed Rotating Disks” (Daily, J. W., and Nece, R. E., 1960, ASME J. Basic Eng., 82, pp. 217–230)
J. Basic Eng. March 1960, 82(1): 230.
doi: https://doi.org/10.1115/1.3662533
Topics:
Dimensions
,
Flow (Dynamics)
,
Friction
,
Rotating disks
,
Skin friction (Fluid dynamics)
Discussion: “Chamber Dimension Effects on Induced Flow and Frictional Resistance of Enclosed Rotating Disks” (Daily, J. W., and Nece, R. E., 1960, ASME J. Basic Eng., 82, pp. 217–230)
J. Basic Eng. March 1960, 82(1): 230.
doi: https://doi.org/10.1115/1.3662534
Topics:
Dimensions
,
Flow (Dynamics)
,
Friction
,
Rotating disks
,
Skin friction (Fluid dynamics)
Discussion: “Chamber Dimension Effects on Induced Flow and Frictional Resistance of Enclosed Rotating Disks” (Daily, J. W., and Nece, R. E., 1960, ASME J. Basic Eng., 82, pp. 217–230)
J. Basic Eng. March 1960, 82(1): 230–231.
doi: https://doi.org/10.1115/1.3662535
Topics:
Dimensions
,
Flow (Dynamics)
,
Friction
,
Rotating disks
,
Skin friction (Fluid dynamics)
Discussion: “Chamber Dimension Effects on Induced Flow and Frictional Resistance of Enclosed Rotating Disks” (Daily, J. W., and Nece, R. E., 1960, ASME J. Basic Eng., 82, pp. 217–230)
J. Basic Eng. March 1960, 82(1): 231.
doi: https://doi.org/10.1115/1.3662536
Topics:
Dimensions
,
Flow (Dynamics)
,
Friction
,
Rotating disks
,
Skin friction (Fluid dynamics)
Discussion: “Chamber Dimension Effects on Induced Flow and Frictional Resistance of Enclosed Rotating Disks” (Daily, J. W., and Nece, R. E., 1960, ASME J. Basic Eng., 82, pp. 217–230)
J. Basic Eng. March 1960, 82(1): 231–232.
doi: https://doi.org/10.1115/1.3662537
Topics:
Dimensions
,
Flow (Dynamics)
,
Friction
,
Rotating disks
,
Skin friction (Fluid dynamics)
Closure to “Discussions of ‘Chamber Dimension Effects on Induced Flow and Frictional Resistance of Enclosed Rotating Disks’” (1960, ASME J. Basic Eng., 82, pp. 230–232)
J. Basic Eng. March 1960, 82(1): 232.
doi: https://doi.org/10.1115/1.3662538
Topics:
Dimensions
,
Flow (Dynamics)
,
Friction
,
Skin friction (Fluid dynamics)
Discussion: “On the Three-Dimensional Turbulent Boundary Layer Generated by Secondary Flow” (Johnston, J. P., 1960, ASME J. Basic Eng., 82, pp. 233–246)
J. Basic Eng. March 1960, 82(1): 246–247.
doi: https://doi.org/10.1115/1.3662540
Topics:
Boundary layer turbulence
,
Flow (Dynamics)
Discussion: “On the Three-Dimensional Turbulent Boundary Layer Generated by Secondary Flow” (Johnston, J. P., 1960, ASME J. Basic Eng., 82, pp. 233–246)
J. Basic Eng. March 1960, 82(1): 247–248.
doi: https://doi.org/10.1115/1.3662542
Topics:
Boundary layer turbulence
,
Flow (Dynamics)
Closure to “Discussions of ‘On the Three-Dimensional Turbulent Boundary Layer Generated by Secondary Flow’” (1960, ASME J. Basic Eng., 82, pp. 246–248)
J. Basic Eng. March 1960, 82(1): 248.
doi: https://doi.org/10.1115/1.3662545
Topics:
Boundary layer turbulence
Errata
Addendum: “Elastic and Damping Properties of Cylindrical Journal Bearings” (Journal of Basic Engineering, 1959, 81, pp. 101–108)
J. Basic Eng. March 1960, 82(1): 249–250.
doi: https://doi.org/10.1115/1.3662546
Topics:
Damping
,
Journal bearings
Email alerts
RSS Feeds
Development and Validation of Machine-Learned Actuator Line Model for Hydrokinetic Turbine Rotor
J. Fluids Eng (August 2025)
Investigation of the Surface Pressure and Thrust Generated by a Tilt Distributed Electric Propulsion Wing
J. Fluids Eng (August 2025)
