... losses of common combinations of two, three, and four bends and the addition of internal vanes were investigated with computational fluid dynamic simulations and validated with reference data. Pressure losses of combinations of bends without vanes were higher or lower than the sum of the single pressure...

... of the vehicle's longitudinal dynamic model in our recent work. The vehicle's accelerating and decelerating motions are simulated in the straight flight state using a self-developed numerical method based on the vehicle's dynamic model with the designed control law. Motion characteristics are analyzed...

... transient changes of specific heat capacities, gas constants, and, therefore, sonic velocities. Using these transient inlet properties, the third area of the investigation was performed, developing a numerical model. A fully transient simulation over the time period of an ingestion event would...

...Tabatabaei Hamidreza; Boroomand Masoud; Taeibi Rahni Mohammad Three-dimensional steady and unsteady (pulsating) compressible flows in a vane-less turbocharger turbine of a 1.7 liter SI engine are simulated numerically, and the results are validated experimentally using a turbocharged on-engine test...

... of air is increased, the strength of swirling flow is decreased because inertial force is superior to the electric body force. 20 12 2011 29 03 2012 18 05 2012 22 05 2012 swirling flow electric fields distribution ground arrangement electrohydrodynamic simulation...

... for one-dimensional flow, a mathematical model of the pneumatic pipe with lumped parameters was developed using ordinary differential equations, which can be easily implemented in most computer programs for the simulation of complex heterogeneous engineering systems. Implemented in Matlab-Simulink...

...-Dimensional Simulation of Effervescent Atomization Spray ,” Atomization Sprays , 19 , pp. 1 – 16 . 10.1615/AtomizSpr.v19.i1.50 17 Lin , J. Z. , Qian , L. J. , Xiong , H. B. , and Chan , T. L. , 2009 , “ Effects of Operating Conditions on Droplet Deposition onto Surface...

...Seok-Won Kang; Debjyoti Banerjee In this study we implemented the network simulation techniques using macromodels (lumped models) for capillary driven flows in microfluidic networks. The flow characteristics in a flow junction, such as meniscus stretching and bifurcation, were studied...

...Ali Benhmidene; Bechir Chaouachi; Mahmoud Bourouis; Slimane Gabsi In the present study, the ammonia-water mixing flow in a bubble pump is numerically simulated. The flow patterns of a two-phase flow in a bubble pump were studied under different conditions of heat flux and tube diameter. A one...