Recently, from the environmental point of view, demand for a combined cycle plant is increasing, and superior gas turbine performance is being rapidly promoted at the same time. As one of the key technologies for superior performance, reduction of secondary air leakage, which is necessary for blade cooling and bearing sealing, is required. Especially, reduction of air leakage through rotating parts and stationary parts clearance is critical.

Wolfe, C. E., et al., 1997, “Brush Seals in Industrial Gas Turbines,” Paper No. AIAA-97-2730.
Chupp, R. E., et al., 1997, “Advanced Seal Development for Large Industrial Gas Turbines,” Paper No. AIAA-97-2731.
Aksit, M. F., et al., 1996, “A Computational of Brush Seal Bristle Deflection,” Paper No. AIAA-96-2909.
Gardner, J., Basu, P., and Dutta, A., 1992, “A New Compliant Seal Concept for Aerospace Applications,” Fourth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, preprint, Vol. A., pp. 593–612.
Johnson, M. C., and Medlin, E. G., 1992, “Laminated Finger Seal With Logarithmic Curvature,” U.S. Patent 5,108,116.
You do not currently have access to this content.