Micro gas turbine (MGT) technology is evolving toward a large variety of novel applications, such as weak gas electrification, inverted Brayton cycles, and fuel cell hybrid cycles; however, many of these systems show very different dynamic behaviors compared to conventional MGTs. In addition, some applications impose more stringent requirements on transient maneuvers, e.g., to limit temperature and pressure gradients in a fuel cell hybrid cycle. Besides providing operational safety, optimizing system dynamics to meet the variable power demand of modern energy markets is also of increasing significance. Numerical cycle simulation programs are crucial tools to analyze these dynamics without endangering the machines, and to meet the challenges of automatic control design. For these tasks, complete cycle simulations of transient maneuvers lasting several minutes need to be calculated. Moreover, sensitivity analysis and optimization of dynamic properties like automatic control systems require many simulation runs. To perform these calculations in an acceptable timeframe, simplified component models based on lumped volume or one-dimensional discretization schemes are necessary. The accuracy of these models can be further improved by parameter identification, as most novel applications are modifications of well-known MGT systems and rely on proven, characterized components. This paper introduces a modular in-house simulation tool written in fortran to simulate the dynamic behavior of conventional and novel gas turbine cycles. Thermodynamics, gas composition, heat transfer to the casing and surroundings, shaft rotation and control system dynamics as well as mass and heat storage are simulated together to account for their interactions. While the presented models preserve a high level of detail, they also enable calculation speeds up to five times faster than real-time. The simulation tool is explained in detail, including a description of all component models, coupling of the elements and the ODE solver. Finally, validation results of the simulator based on measurement data from the DLR Turbec T100 recuperated MGT test rig are presented, including cold start-up and shutdown maneuvers.
Skip Nav Destination
Article navigation
April 2017
Research-Article
Introduction of a New Numerical Simulation Tool to Analyze Micro Gas Turbine Cycle Dynamics
Martin Henke,
Martin Henke
German Aerospace Centre (DLR),
Institute of Combustion Technology,
Pfaffenwaldring 38-40,
Stuttgart 70569, Germany
e-mail: Martin.Henke@DLR.de
Institute of Combustion Technology,
Pfaffenwaldring 38-40,
Stuttgart 70569, Germany
e-mail: Martin.Henke@DLR.de
Search for other works by this author on:
Thomas Monz,
Thomas Monz
German Aerospace Centre (DLR),
Institute of Combustion Technology,
Pfaffenwaldring 38-40,
Stuttgart 70569, Germany
Institute of Combustion Technology,
Pfaffenwaldring 38-40,
Stuttgart 70569, Germany
Search for other works by this author on:
Manfred Aigner
Manfred Aigner
German Aerospace Centre (DLR),
Institute of Combustion Technology,
Pfaffenwaldring 38-40,
Stuttgart 70569, Germany
Institute of Combustion Technology,
Pfaffenwaldring 38-40,
Stuttgart 70569, Germany
Search for other works by this author on:
Martin Henke
German Aerospace Centre (DLR),
Institute of Combustion Technology,
Pfaffenwaldring 38-40,
Stuttgart 70569, Germany
e-mail: Martin.Henke@DLR.de
Institute of Combustion Technology,
Pfaffenwaldring 38-40,
Stuttgart 70569, Germany
e-mail: Martin.Henke@DLR.de
Thomas Monz
German Aerospace Centre (DLR),
Institute of Combustion Technology,
Pfaffenwaldring 38-40,
Stuttgart 70569, Germany
Institute of Combustion Technology,
Pfaffenwaldring 38-40,
Stuttgart 70569, Germany
Manfred Aigner
German Aerospace Centre (DLR),
Institute of Combustion Technology,
Pfaffenwaldring 38-40,
Stuttgart 70569, Germany
Institute of Combustion Technology,
Pfaffenwaldring 38-40,
Stuttgart 70569, Germany
1Corresponding author.
Contributed by the Turbomachinery Committee of ASME for publication in the JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Manuscript received August 2, 2016; final manuscript received August 16, 2016; published online November 2, 2016. Editor: David Wisler.
J. Eng. Gas Turbines Power. Apr 2017, 139(4): 042601 (8 pages)
Published Online: November 2, 2016
Article history
Received:
August 2, 2016
Revised:
August 16, 2016
Citation
Henke, M., Monz, T., and Aigner, M. (November 2, 2016). "Introduction of a New Numerical Simulation Tool to Analyze Micro Gas Turbine Cycle Dynamics." ASME. J. Eng. Gas Turbines Power. April 2017; 139(4): 042601. https://doi.org/10.1115/1.4034703
Download citation file:
Get Email Alerts
Image-based flashback detection in a hydrogen-fired gas turbine using a convolutional autoencoder
J. Eng. Gas Turbines Power
Fuel Thermal Management and Injector Part Design for LPBF Manufacturing
J. Eng. Gas Turbines Power
An investigation of a multi-injector, premix/micromix burner burning pure methane to pure hydrogen
J. Eng. Gas Turbines Power
Related Articles
Operational Strategies of Wet-Cycle Micro Gas Turbines and Their Economic Evaluation
J. Eng. Gas Turbines Power (December,2016)
Modeling and Simulation of an Externally Fired Micro-Gas Turbine for Standalone Polygeneration Application
J. Eng. Gas Turbines Power (November,2016)
Development of a Simulation Model of Transient Operation of Micro-Combined Heat and Power Systems in a Microgrid
J. Eng. Gas Turbines Power (March,2018)
Toward Higher Micro Gas Turbine Efficiency and Flexibility—Humidified Micro Gas Turbines: A Review
J. Eng. Gas Turbines Power (August,2018)
Related Proceedings Papers
Related Chapters
Physiology of Human Power Generation
Design of Human Powered Vehicles
Threshold Functions
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Introduction I: Role of Engineering Science
Fundamentals of heat Engines: Reciprocating and Gas Turbine Internal Combustion Engines