This lecture reviews a relatively recent body of heat transfer work that bases on a deterministic (constructal) principle the occurrence of geometric form in systems with internal flows. The same principle of global optimization subject to constraints allow us to anticipate the natural (animate and inanimate) flow architectures that surround us. The lecture starts with the example of the optimal spatial distribution of material (e.g., heat exchanger equipment) in power plants. Similarly, void space can be allocated optimally to construct flow channels in the volume occupied by a heat generating system. The lecture continues with the optimization of the path for heat flow between a volume and one point. It shows that when the heat flow can choose between at least two paths, low conductivity versus high conductivity, the optimal flow structure for minimal global resistance in steady flow is a tree. Nearly the same tree is deduced by minimizing the time of discharge in the flow from a volume to one point. Analogous tree-shaped flows are constructed in pure fluid flows, and in flow through a heterogeneous porous medium. The optimization of trees that combine heat transfer and fluid flow is illustrated by means of two-dimensional trees of plate fins. The method is extended to the superposition of two fluid trees in counterflow, as in vascularized tissues under the skin. The two trees in counterflow are one tree of convective heat currents that effect the loss of body heat. It is shown that the optimized geometry of the tree is responsible for the proportionalities between body heat loss and body size raised to the power 3/4, and between breathing time and body size raised to the power 1/4. The optimized structures are robust with respect to changes in some of the externally specified parameters. When more degrees-of-freedom are allowed, the optimized structure looks more natural. The lecture outlines a unique opportunity for engineers to venture beyond their discipline, and to construct an engineering theory on the origin and workings of naturally organized systems. [S0022-1481(00)02403-8]
Issue Section:
1999 Max Jakob Memorial Award Lecture
1.
Bejan, A., 2000, Shape and Structure, From Engineering to Nature, Cambridge University Press, Cambridge, UK.
2.
Bejan, A., 1997, Advanced Engineering Thermodynamics, Second Ed., John Wiley and Sons, New York.
3.
Bejan
, A.
, 1988
, “Theory of Heat Transfer-Irreversible Power Plants
,” Int. J. Heat Mass Transf.
, 31
, pp. 1211
–1219
.4.
Bejan
, A.
, 1989
, “Theory of Heat Transfer-Irreversible Refrigeration Plants
,” Int. J. Heat Mass Transf.
, 32
, pp. 1631
–1639
.5.
Bejan, A., Tsatsaronis, G., and Moran, M., 1996, Thermal Design and Optimization, John Wiley and Sons, New York.
6.
Moran, M. J., 1982, Availability Analysis: A Guide to Efficient Energy Use, Prentice-Hall, Englewood Cliffs, NJ.
7.
Bejan, A., 1982, Entropy Generation Through Heat and Fluid Flow, John Wiley and Sons, New York.
8.
Bejan, A., 1988, Advanced Engineering Thermodynamics, John Wiley and Sons, New York.
9.
Bejan, A., 1996, Entropy Generation Minimization, CRC Press, Boca Raton, FL.
10.
Bejan
, A.
, 1996
, “Entropy Generation Minimization: The New Thermodynamics of Finite-Size Devices and Finite-Time Processes
,” J. Appl. Phys.
, 79
, pp. 1191
–1218
.11.
Feidt, M., 1987, Thermodynamique et Optimisation E´nergetique des Syste`mes et Procede´s, Technique et Documentation, Lavoisier, Paris.
12.
Sieniutycz, S., and Salamon, P., eds., 1990, Finite-Time Thermodynamics and Thermoeconomics, Taylor and Francis, New York.
13.
De Vos, A., 1992, Endoreversible Thermodynamics of Solar Energy Conversion, Oxford University Press, Oxford, UK.
14.
Radcenco, V., 1994, Generalized Thermodynamics, Editura Tehnica, Bucharest.
15.
Bejan, A., and Mamut, E., eds., 1999, Thermodynamic Optimization of Complex Energy Systems, Kluwer Academic Publishers, Dordrecht, The Netherlands.
16.
Bejan, A., Vada´sz, P., and Kro¨ger, D. G., 1999, Energy and the Environment, Kluwer Academic Publishers, Dordrecht, The Netherlands.
17.
Schmidt-Nielsen, K., 1964, Desert Animals: Physiological Problems of Heat and Water, Oxford University Press, Oxford, UK.
18.
Schmidt-Nielsen, K., 1972, How Animals Work, Cambridge University Press, Cambridge, UK.
19.
Schmidt-Nielsen, K., 1984, Scaling: Why Is Animal Size So Important?, Cambridge University Press, Cambridge, UK.
20.
Peters, R. H., 1983, The Ecological Implications of Body Size, Cambridge University Press, Cambridge, UK.
21.
Calder, W. A., III, 1984, Size, Function, and Life History, Harvard University Press, Cambridge, MA.
22.
Vogel, S., 1988, Life’s Devices, Princeton University Press, Princeton, NJ.
23.
Kraus, A. D., and Bar-Cohen, A., 1995, Design and Analysis of Heat Sinks, John Wiley and Sons, New York.
24.
Bejan, A., 1995, Convection Heat Transfer, 2nd Ed., John Wiley and Sons, New York.
25.
Kim, S. J., and Lee, S. W., eds., 1996, Air Cooling Technology for Electronic Equipment, CRC Press, Boca Raton, FL.
26.
Sathe
, S.
, and Sammakia
, B.
, 1998
, “A Review of Recent Developments in Some Practical Aspects of Air-Cooled Electronic Packages
,” ASME J. Heat Transfer
, 120
, pp. 830
–839
.27.
Bejan, A., 1984, Convection Heat Transfer, John Wiley and Sons, New York, Chapter 4, Problem 11, p. 157.
28.
Bar-Cohen
, A.
, and Rohsenow
, W. M.
, 1984
, “Thermally Optimum Spacing of Vertical, Natural Convection Cooled, Parallel Plates
,” ASME J. Heat Transfer
, 106
, pp. 116
–123
.29.
Anand
, N. K.
, Kim
, S. H.
, and Fletcher
, L. S.
, 1992
, “The Effect of Plate Spacing on Free Convection between Heated Parallel Plates
,” ASME J. Heat Transfer
, 114
, pp. 515
–518
.30.
Bejan
, A.
, Fowler
, A. J.
, and Stanescu
, G.
, 1995
, “The Optimal Spacing Between Horizontal Cylinders in a Fixed Volume Cooled by Natural Convection
,” Int. J. Heat Mass Transf.
, 38
, pp. 2047
–2055
.31.
Fisher
, T. S.
, and Torrance
, K. E.
, 1998
, “Free Convection Limits for Pin-Fin Cooling
,” ASME J. Heat Transfer
, 120
, pp. 633
–640
.32.
Ledezma
, G. A.
, and Bejan
, A.
, 1997
, “Optimal Geometric Arrangement of Staggered Vertical Plates in Natural Convection
,” ASME J. Heat Transfer
, 119
, pp. 700
–708
.33.
Bejan
, A.
, and Sciubba
, E.
, 1992
, “The Optimal Spacing for Parallel Plates Cooled by Forced Convection
,” Int. J. Heat Mass Transf.
, 35
, pp. 3259
–3264
.34.
Petrescu
, S.
, 1994
, “Comments on the Optimal Spacing of Parallel Plates Cooled by Forced Convection
,” Int. J. Heat Mass Transf.
, 37
, pp. 1283
1283
.35.
Fowler
, A. J.
, Ledezma
, G. A.
, and Bejan
, A.
, 1997
, “Optimal Geometric Arrangement of Staggered Plates in Forced Convection
,” Int. J. Heat Mass Transf.
, 40
, pp. 1795
–1805
.36.
Bejan
, A.
, 1995
, “The Optimal Spacings for Cylinders in Crossflow Forced Convection
,” ASME J. Heat Transfer
, 117
, pp. 767
–770
.37.
Stanescu
, G.
, Fowler
, A. J.
, and Bejan
, A.
, 1996
, “The Optimal Spacing of Cylinders in Free-Stream Cross-Flow Forced Convection
,” Int. J. Heat Mass Transf.
, 39
, pp. 311
–317
.38.
Ledezma
, G. A.
, Morega
, A. M.
, and Bejan
, A.
, 1996
, “Optimal Spacing Between Fins With Impinging Flow
,” ASME J. Heat Transfer
, 118
, pp. 570
–577
.39.
Heinrich
, B.
, 1981
, “The Mechanism and Energetics of Honeybee Swarm Temperature Regulation
,” J. Exp. Biol.
, 91
, pp. 25
–55
.40.
Basak
, T.
, Rao
, K. K.
, and Bejan
, A.
, 1996
, “A Model for Heat Transfer in a Honey Bee Swarm
,” Chem. Eng. Sci.
, 51
, pp. 387
–400
.41.
Bejan
, A.
, Ikegami
, Y.
, and Ledezma
, G. A.
, 1998
, “Constructal Theory of Natural Crack Pattern Formation for Fastest Cooling
,” Int. J. Heat Mass Transf.
, 41
, pp. 1945
–1954
.42.
Bejan
, A.
, 1997
, “Constructal-Theory Network of Conducting Paths for Cooling a Heat Generating Volume
,” Int. J. Heat Mass Transf.
, 40
, pp. 799
–816
.43.
Ledezma
, G.
, Bejan
, A.
, and Errera
, M. R.
, 1997
, “Constructal Tree Networks for Heat Transfer
,” J. Appl. Phys.
, 82
, pp. 89
–100
.44.
Rodriguez-Iturbe, I., and Rinaldo, A., 1997, Fractal River Basins, Cambridge University Press, Cambridge, UK.
45.
Meakin, P., 1998, Fractals, Scaling and Growth Far From Equilibrium, Cambridge University Press, Cambridge, UK.
46.
Cohn
, D. L.
, 1954
, “Optimal Systems: I. The Vascular System
,” Bull. Math. Biophys.
, 16
, pp. 59
–74
.47.
Thompson, D’A., 1942, On Growth and Form, Cambridge University Press, Cambridge, UK.
48.
Mandelbrot, B. B., 1982, The Fractal Geometry of Nature, Freeman, New York.
49.
Almogbel
, M.
, and Bejan
, A.
, 1999
, “Conduction Trees With Spacings at the Tips
,” Int. J. Heat Mass Transf.
, 42
, pp. 3739
–3756
.50.
Dan
, N.
, and Bejan
, A.
, 1998
, “Constructal Tree Networks for the Time-Dependent Discharge of a Finite-Size Volume to One Point
,” J. Appl. Phys.
, 84
, pp. 3042
–3050
.51.
Neagu
, M.
, and Bejan
, A.
, 1999
, “Constructal-Theory Tree Networks of ‘Constant’ Thermal Resistance
,” J. Appl. Phys.
, 86
, pp. 1136
–1144
.52.
Neagu
, M.
, and Bejan
, A.
, 1999
, “Three-Dimensional Tree Constructs of ‘Constant’ Thermal Resistance
,” J. Appl. Phys.
, 86
, pp. 7107
–7115
.53.
Nelson
, R. A.
, and Bejan
, A.
, 1998
, “Constructal Optimization of Internal Flow Geometry in Convection
,” ASME J. Heat Transfer
, 120
, pp. 357
–364
.54.
Malkus
, W. V. R.
, 1954
, “The Heat Transport and Spectrum of Thermal Turbulence
,” Proc. R. Soc. London, Ser. A
, 225
, pp. 196
–212
.55.
Glansdorff, P., and Prigogine, L., 1971, Thermodynamic Theory of Structure, Stability and Fluctuations, John Wiley and Sons, London.
56.
Avnir
, D.
, Biham
, O.
, Lidar
, D.
, and Malcai
, O.
, 1998
, “Is the Geometry of Nature Fractal?
,” Science
, 279
, pp. 39
–40
.57.
Bejan
, A.
, and Tondeur
, D.
, 1998
, “Equipartition, Optimal Allocation, and the Constructal Approach to Predicting Organization in Nature
,” Rev. Gen. Therm.
, 37
, pp. 165
–180
.58.
Nottale, L., 1993, Fractal Space-Time and Microphysics, World Scientific, Singapore.
59.
Errera
, M. R.
, and Bejan
, A.
, 1998
, “Deterministic Tree Networks for River Drainage Basins
,” Fractals
, 6
, pp. 245
–261
.60.
Bejan
, A.
, and Errera
, M. R.
, 2000
, “Convective Trees of Fluid Channels for Volumetric Cooling
,” Int. J. Heat Mass Transf.
, 43
, pp. 3105
–3118
.61.
Hamburgen, W. R., 1986, “Optimal Finned Heat Sinks,” WRL Research Report 86/4, Digital, Western Research Laboratory, Palo Alto, CA.
62.
Kraus
, A. D.
, 1999
, “Developments in the Analysis of Finned Arrays
,” Int. J. Transp. Phenom.
, 1
, pp. 141
–164
.63.
Gardner
, K. A.
, 1945
, “Efficiency of Extended Surfaces
,” Trans. ASME
, 67
, pp. 621
–631
.64.
Bejan
, A.
, and Dan
, N.
, 1999
, “Constructal Trees of Convective Fins
,” ASME J. Heat Transfer
, 121
, 675
–682
.65.
Bejan
, A.
, and Almogbel
, M.
, 2000
, “Constructal T-Shaped Fins
,” Int. J. Heat Mass Transf.
, 43
, pp. 2101
–2115
.66.
Alebrahim
, A.
, and Bejan
, A.
, 1999
, “Constructal Trees of Circular Fins for Conductive and Convective Heat Transfer
,” Int. J. Heat Mass Transf.
, 42
, pp. 3585
–3597
.67.
Lin
, W. W.
, and Lee
, D. J.
, 1997
, “Diffusion-Convection Process in a Branching Fin
,” Chem. Eng. Commun.
, 158
, pp. 59
–70
.68.
Lee
, D. J.
, and Lin
, W. W.
, 1995
, “Second-Law Analysis on a Fractal-Like Fin Under Crossflow
,” AIChE J.
, 41
, pp. 2314
–2317
.69.
Lin
, W. W.
, and Lee
, D. J.
, 1997
, “Second-Law Analysis on a Pin-Fin Array Under Cross-Flow
,” Int. J. Heat Mass Transf.
, 40
, pp. 1937
–1945
.70.
Bejan
, A.
, 1997
, “Constructal Tree Network for Fluid Flow Between a Finite-Size Volume and One Source or Sink
,” Rev. Gen. Therm.
, 36
, pp. 592
–604
.71.
Bejan
, A.
, and Errera
, M. R.
, 1997
, “Deterministic Tree Networks for Fluid Flow: Geometry for Minimal Flow Resistance between a Volume and One Point
,” Fractals
, 5
, pp. 685
–695
.72.
Errera
, M. R.
, and Bejan
, A.
, 1999
, “Tree Networks for Flows in Porous Media
,” J. Porous Media
, 2
, pp. 1
–18
.73.
Weibel, E. R., 1963, Morphometry of the Human Lung, Academic Press, New York.
74.
Nonnenmacher, T. F., Losa, G. A., and Weibel, E. R., eds., 1994, Fractals in Biology and Medicine, Birkha¨user Verlag, Basel, Switzerland.
75.
MacDonald, N., 1983, Trees and Networks in Biological Models, Wiley, Chichester, UK.
76.
Bloom, A. L., 1978, Geomorphology, Prentice-Hall, Englewood Cliffs, NJ.
77.
Leopold, L. B., Wolman, M. G., and Miller, J. P., 1964, Fluvial Processes in Geomorphology, W. H. Freeman, San Francisco, CA.
78.
Scheiddeger, A. E., 1970, Theoretical Geomorphology, 2nd Ed., Springer-Verlag, Berlin.
79.
Chorley, R. J., Schumm, S. A., and Sugden, D. E., 1984, Geomorphology, Methuen, London.
80.
Morisawa, M., 1985, Rivers: Form and Process, Longman, London.
81.
Bejan, A., 2000, “The Tree of Convective Heat Streams: Its Thermal Insulation Function and the Predicted 3/4-Power Relation between Body Heat Loss and Body Size,” Int. J. Heat Mass Transf., 43, to appear.
82.
Weinbaum
, S.
, and Jiji
, L. M.
, 1985
, “A New Simplified Bioheat Equation for the Effect of Blood Flow on Local Average Tissue Temperature
,” ASME J. Biomech. Eng.
, 107
, pp. 131
–139
.83.
Huang
, H. W.
, Chen
, Z. P.
, and Roemer
, R. B.
, 1996
, “A Counter Current Vascular Network Model of Heat Transfer in Tissues
,” ASME J. Biomech. Eng.
, 118
, 120
–129
.84.
Bejan
, A.
, 1979
, “A General Variational Principle for Thermal Insulation System Design
,” Int. J. Heat Mass Transf.
, 22
, pp. 219
–228
.85.
Bejan
, A.
, 1997
, “Theory of Organization in Nature: Pulsating Physiological Processes
,” Int. J. Heat Mass Transf.
, 40
, pp. 2097
–2104
.86.
Hildebrandt, S., and Tromba, A., 1985, Mathematics and Optimal Form, Scientific American Books, New York.
Copyright © 2000
by ASME
You do not currently have access to this content.
