...Tanmay Basak; Sankaran Durairaj A detailed theoretical analysis has been carried out to study efficient microwave assisted heating of thermoplastic (Nylon 66) slabs via polymer-ceramic-polymer composite attached with ceramic plate at one side. The ceramic layer or plate is chosen as Al 2 O 3 or SiC...

... of a flying winged experimental payload has been performed in order to assess the thermomechanical behavior and resistance of ultrahigh temperature ceramics (UHTC) in real flight aerothermal environment. The EXPERT flying winglet article is intended to reproduce such conditions. Particular interest covers...

...Jörg Petrasch; Birte Schrader; Peter Wyss; Aldo Steinfeld The effective thermal conductivity of reticulate porous ceramics (RPCs) is determined based on the 3D digital representation of their pore-level geometry obtained by high-resolution multiscale computer tomography. Separation of scales...

... Ordered Macroporous SiCN Ceramic Using Sacrificing Template Method ,” Microporous Mesoporous Mater. 1387-1811 10.1016/j.micromeso.2005.01.014 , 80 , 357 – 362 , and references therein. Siegel , R. , and Howell , J. , 1992 , Thermal Radiation Heat Transfer , 3rd ed. , Hemisphere...

... has a branching network embedded within low temperature cofire ceramic (LTCC) and the same network embedded within thick film silver, which has the ability of being cofired with low temperature cofired ceramic substrates. The performance is evaluated using both a channel-level lumped model and a CFD...

...Frank E. Pfefferkorn; Frank P. Incropera; Yung C. Shin A procedure using a long-wavelength pyrometer is developed for the measurement of surface temperatures on materials that are semitransparent at shorter wavelengths, and specific application is made to a dense zirconia ceramic (Mg-PSZ...

... is predicted. It is shown that introduction of a carrier gas can lead to a significant modification of the plasma jet, and can have an effect on the thermal histories of the injected particles. The study is motivated by the processing of non-traditional materials, specifically nanostructured ceramics...

...Michael F. Modest; Thomas M. Mallison Lsaers are emerging as a valuable tool for shaping and cutting hard and brittle ceramics. Unfortunately, the large, concentrated heat flux rates that allow the laser to efficiently cut and shape the ceramic also result in large localized thermal stresses...