On-the-fly laser machining is defined as a process that aims to generate pockets/patches on target components that are rotated or moved at a constant velocity. Since it is a nonintegrated process (i.e., linear/rotary stage system moving the part is independent of that of the laser), it can be deployed to/into large industrial installations to perform in situ machining, i.e., without the need of disassembly. This allows a high degree of flexibility in its applications (e.g., balancing) and can result in significant cost savings for the user (e.g., no dis(assembly) cost). This paper introduces the concept of on-the-fly laser machining encompassing models for generating user-defined ablated features as well as error budgeting to understand the sources of errors on this highly dynamic process. Additionally, the paper presents laser pulse placement strategies aimed at increasing the surface finish of the targeted component by reducing the area surface roughness that are possible for on-the-fly laser machining. The overall concept was validated by balancing a rotor system through ablation of different pocket shapes by the use of a Yb:YAG pulsed fiber laser. In this respect, first, two different laser pulse placement strategies (square and hexagonal) were introduced in this research and have been validated on Inconel 718 target material; thus, it was concluded that hexagonal pulse placement reduces surface roughness by up to 17% compared to the traditional square laser pulse placement. The concept of on-the-fly laser machining has been validated by ablating two different features (4 × 60 mm and 12 × 4 mm) on a rotative target part at constant speed (100 rpm and 86 rpm) with the scope of being balanced. The mass removal of the ablated features to enable online balancing has been achieved within < 4 mg of the predicted value. Additionally, the error modeling revealed that most of the uncertainties in the dimensions of the feature/pocket originate from the stability of the rotor speed, which led to the conclusion that for the same mass of material to be removed it is advisable to ablate features (pockets) with longer circumferential dimensions, i.e., stretched and shallower pockets rather than compact and deep.
Skip Nav Destination
Article navigation
March 2017
Research-Article
On-The-Fly Laser Machining: A Case Study for In Situ Balancing of Rotative Parts
M. Stoesslein,
M. Stoesslein
Rolls-Royce Manufacturing and
On-Wing University Technology Centre,
Faculty of Engineering,
University of Nottingham,
Nottingham NG7 2RD, UK;
On-Wing University Technology Centre,
Faculty of Engineering,
University of Nottingham,
Nottingham NG7 2RD, UK;
Department of Mechanical,
Materials and Manufacturing Engineering,
Coates Building, Room C31,
University Park,
Nottingham NG7 2RD, UK
e-mail: moritz@stoesslein.com
Materials and Manufacturing Engineering,
Coates Building, Room C31,
University Park,
Nottingham NG7 2RD, UK
e-mail: moritz@stoesslein.com
Search for other works by this author on:
D. Axinte,
D. Axinte
Rolls-Royce Manufacturing and
On-Wing University Technology Centre,
Faculty of Engineering,
University of Nottingham,
Nottingham NG7 2RD, UK;
On-Wing University Technology Centre,
Faculty of Engineering,
University of Nottingham,
Nottingham NG7 2RD, UK;
Department of Mechanical,
Materials and Manufacturing Engineering,
Coates Building, Room A63,
University Park,
Nottingham, NG7 2RD, UK
e-mail: dragos.axinte@nottingham.ac.uk
Materials and Manufacturing Engineering,
Coates Building, Room A63,
University Park,
Nottingham, NG7 2RD, UK
e-mail: dragos.axinte@nottingham.ac.uk
Search for other works by this author on:
D. Gilbert
D. Gilbert
Rolls-Royce Manufacturing and
On-Wing University Technology Centre,
Faculty of Engineering,
University of Nottingham,
Nottingham NG7 2RD, UK;
On-Wing University Technology Centre,
Faculty of Engineering,
University of Nottingham,
Nottingham NG7 2RD, UK;
Department of Mechanical,
Materials and Manufacturing Engineering,
Coates Building, Room C31,
University Park,
Nottingham NG7 2RD, UK
e-mail: epxdg4@exmail.nottingham.ac.uk
Materials and Manufacturing Engineering,
Coates Building, Room C31,
University Park,
Nottingham NG7 2RD, UK
e-mail: epxdg4@exmail.nottingham.ac.uk
Search for other works by this author on:
M. Stoesslein
Rolls-Royce Manufacturing and
On-Wing University Technology Centre,
Faculty of Engineering,
University of Nottingham,
Nottingham NG7 2RD, UK;
On-Wing University Technology Centre,
Faculty of Engineering,
University of Nottingham,
Nottingham NG7 2RD, UK;
Department of Mechanical,
Materials and Manufacturing Engineering,
Coates Building, Room C31,
University Park,
Nottingham NG7 2RD, UK
e-mail: moritz@stoesslein.com
Materials and Manufacturing Engineering,
Coates Building, Room C31,
University Park,
Nottingham NG7 2RD, UK
e-mail: moritz@stoesslein.com
D. Axinte
Rolls-Royce Manufacturing and
On-Wing University Technology Centre,
Faculty of Engineering,
University of Nottingham,
Nottingham NG7 2RD, UK;
On-Wing University Technology Centre,
Faculty of Engineering,
University of Nottingham,
Nottingham NG7 2RD, UK;
Department of Mechanical,
Materials and Manufacturing Engineering,
Coates Building, Room A63,
University Park,
Nottingham, NG7 2RD, UK
e-mail: dragos.axinte@nottingham.ac.uk
Materials and Manufacturing Engineering,
Coates Building, Room A63,
University Park,
Nottingham, NG7 2RD, UK
e-mail: dragos.axinte@nottingham.ac.uk
D. Gilbert
Rolls-Royce Manufacturing and
On-Wing University Technology Centre,
Faculty of Engineering,
University of Nottingham,
Nottingham NG7 2RD, UK;
On-Wing University Technology Centre,
Faculty of Engineering,
University of Nottingham,
Nottingham NG7 2RD, UK;
Department of Mechanical,
Materials and Manufacturing Engineering,
Coates Building, Room C31,
University Park,
Nottingham NG7 2RD, UK
e-mail: epxdg4@exmail.nottingham.ac.uk
Materials and Manufacturing Engineering,
Coates Building, Room C31,
University Park,
Nottingham NG7 2RD, UK
e-mail: epxdg4@exmail.nottingham.ac.uk
1Corresponding author.
Manuscript received March 4, 2016; final manuscript received August 6, 2016; published online October 3, 2016. Assoc. Editor: Y. B. Guo.
J. Manuf. Sci. Eng. Mar 2017, 139(3): 031002 (14 pages)
Published Online: October 3, 2016
Article history
Received:
March 4, 2016
Revised:
August 6, 2016
Citation
Stoesslein, M., Axinte, D., and Gilbert, D. (October 3, 2016). "On-The-Fly Laser Machining: A Case Study for In Situ Balancing of Rotative Parts." ASME. J. Manuf. Sci. Eng. March 2017; 139(3): 031002. https://doi.org/10.1115/1.4034476
Download citation file:
Get Email Alerts
Cited By
Related Articles
Multiscale Finite Element Modeling of Alumina Ceramics Undergoing Laser-Assisted Machining
J. Manuf. Sci. Eng (January,2016)
An Analytical Representation of Chip Area for Corner-Radiused Tools Under Both Depth-of-Cut and Feed Variations
J. Manuf. Sci. Eng (November,2000)
Reproduction of Three-dimensional Microstructures on Inconel 718 utilizing Laser-textured PECM Cathodes
J. Manuf. Sci. Eng (January,0001)
Modeling of the Holding Force in an Electromagnetic Chuck
J. Manuf. Sci. Eng (August,2000)
Related Proceedings Papers
Related Chapters
Interlaboratory Comparison of the Thickness of the Destroyed Surface Layer of Closed-cell Foam Insulation Specimens
Heat-Air-Moisture Transport: Measurements on Building Materials
Errors in Automated Pavement Surface Distress Data Collection
Surface Characteristics of Roadways: International Research and Technologies
Analysis of Errors in Guarded Hot Plate Measurements as Compiled by the Finite Element Method
Guarded Hot Plate and Heat Flow Meter Methodology