... DED process exhibits geometric inaccuracies resulting from the variability in the bead geometry and demonstrates heterogeneity in microstructure and mechanical properties. This study investigates the use of tailored periodic machining interventions during the Wire Arc DED process to address...

... different from the conventionally manufactured case and this necessitates post-AM heat treatments. The current paper reviews the effects of printing parameters and heat treatment on microstructure and mechanical properties of PBF/L produced maraging steel 300 alloy. Tensile, impact, fracture, and fatigue...

... attempted to achieve this on commercially pure aluminum by utilizing the friction-assisted lateral extrusion process (FALEP), which has the capability of producing sheets from bulk or powder metal in a single step, by applying large shear strain. The texture, microstructure, and mechanical properties...

... of the microhardness, tensile strength, and corrosion resistance of an LPBF manufactured Al-5024 alloy by optimization of heat treatment parameters. The effect of the isothermal heat treatment (IHT) process on the microstructure evolution, mechanical properties, and electrochemical properties of an LPBF-processed Al...

... for this study are included in the paper. References [1] Murthy , C. V. S. , Gopala Krishna , A. , and Reddy , G. M. , 2019 , “ Microstructure and Mechanical Properties of Similar and Dissimilar Metal Gas Tungsten Constricted Arc Welds: Maraging Steel to 13-8 Mo Stainless Steel ,” Defence...

... FSP TiB 2 mechanical properties wear corrosion Thanks to low density, better specific strength, and good damping capacities of magnesium alloys, considerable attention has been paid to use of these alloys in aerospace and automotive industries [ 1 ]. However, poor mechanical, wear...

... the results of mechanical and microstructural investigations on a modified AISI-8630 steel subjected to CDW. The effects of welding process parameters, including rotational speed, friction, and forge forces, during CDW were explored to determine an optimum welding condition. The mechanical properties...

...Tanveer Majeed; Nooruddin Ansari; Yashwant Mehta; Arshad Noor Siddiquee Material flow and heat generation by tool shoulder during Friction Stir Welding (FSW) significantly alters the microstructural and thermomechanical behavior of joints. The effect of shoulder size on mechanical properties...

...) Email: seidi@hawaii.edu Email: scott20@hawaii.edu Email: blair.carlson@gm.com 21 10 2020 07 04 2021 07 04 2021 29 06 2021 additive manufacturing coating solid-state deposition process parameters characterization mechanical properties Friction surfacing...

... samples was carried out at the same flow rate, and a significantly larger surface area of the tubular samples required a much larger volume of acid to pump through to achieve comparable results. Table 5 Comparison of the porosity, permeability and mechanical properties of titanium scaffolds...

...Nafiseh Mohammadtabar; Mohammad Bakhshi-Jooybari; Hamid Gorji; Roohollah Jamaati; Jerzy A. Szpunar The present work focused on the effect of the electric current pulse type on the springback, microstructure, texture, and mechanical properties during the V-bending process of AA2024 aluminum alloy...

...Chunjie Li; Sansan Ao; J. P. Oliveira; Zhi Zeng; Huijie Cui; Zhen Luo The influence of postweld heat treatments (PWHTs) on the phase transformation characteristics, microstructural evolution, and mechanical properties of ultrasonic spot welded NiTi alloy with Al interlayer was investigated. At room...

...-related parameters. The reported data on density, dimensional and geometric accuracy, and mechanical properties achieved by metal binder jetting are summarized. With parameter optimization and a suitable sintering process, ten materials have been proven to achieve a relative density of higher than 90...

...Zhi-li Hu; Hai-yang Yu; Qiu Pang Interfacial layers greatly influence the performance of steel–aluminum friction stir welding (FSW) joints, and understanding the formation and evolution of intermetallic compounds (IMC) can help improve the mechanical properties of the welds. In this study, FSW...

...Bao Le; Jibran Khaliq; Dehong Huo; Xiangyu Teng; Islam Shyha Micromachining of nanocomposites is deemed to be a complicated process due to the anisotropic, heterogeneous structure, and advanced mechanical properties of these materials associated with the size effects in micromachining. It leads...

...Bao Le; Jibran Khaliq; Dehong Huo; Xiangyu Teng; Islam Shyha Micromachining of nanocomposites is deemed to be a complicated process due to the anisotropic, heterogeneous structure and advanced mechanical properties of these materials associated with the size effects in micromachining. It leads...

..., 2018. Assoc. Editor: Martine Dubé. 24 06 2018 17 09 2018 composites manufacturing voids permeability mechanical properties Due to growing industrial demand for materials with high strength-to-weight ratio, fiber-reinforced composites have become more attractive...

... for the unprocessed specimens, primary sandwich and first, second, and third cycles of ARB process by ASTM E561 and compact tension (CT) specimens. Also, the microstructure and mechanical properties have been investigated using optical microscopy, scanning electron microscopy, uniaxial tensile tests...

...Salah Eddine Brika; Yaoyao Fiona Zhao; Mathieu Brochu; Justin Mezzetta This paper proposes an integrated approach to determine optimal build orientation for powder bed fusion by laser (PBF-L), by simultaneously optimizing mechanical properties, surface roughness, the amount of support structure...

... line resulted in products with poor mechanical properties compared with those produced under laboratory conditions. The contamination by steel during the process resulted in the formation of a Ti–Fe solid solution phase at localized areas in the parts, decreasing the elongation to below 4%. Methods...