This paper examines the effect of varying the microstructural composition of titanium aluminide on the evolution of residual stresses in titanium aluminide matrix composites. An analytical model is developed to determine residual stresses in fiber and matrix phases of unidirectional, SiC/Ti-Al composites subjected to axisymmetric thermal loading. The model uses elements of the concentric cylinder model and the method of cells to calculate residual thermal stresses in the presence of temperature-dependent and inelastic behavior of the fiber and matrix phases. The concentric cylinder model is employed as a geometric model for the unidirectional composite, whereas the method of cells is employed in modeling the microstructure of the titanium aluminide matrix phase. The titanium aluminide matrix consists of distinct brittle and ductile α and β phases whose volume content is varied in the present scheme to understand how the resulting residual stresses can be altered. Both spatially uniform and nonuniform variations of the α and β phases are considered. The results explain the occurrence of radial microcracks in SiC/Ti-Al composites in the presence of a β-depleted region at the fiber/matrix interface, and validate the potential of engineering the matrix phase to reduce residual stresses in these composites.
Skip Nav Destination
Article navigation
April 1994
Research Papers
The Effect of Matrix Microstructure on Thermally Induced Residual Stresses in SiC/Titanium Aluminide Composites
Marek-Jerzy Pindera,
Marek-Jerzy Pindera
Civil Engineering & Applied Mechanics Department, University of Virginia, Charlottesville, VA 22903
Search for other works by this author on:
Alan D. Freed
Alan D. Freed
Processing Science & Technology Branch, NASA-Lewis Research Center, Cleveland, OH 44135
Search for other works by this author on:
Marek-Jerzy Pindera
Civil Engineering & Applied Mechanics Department, University of Virginia, Charlottesville, VA 22903
Alan D. Freed
Processing Science & Technology Branch, NASA-Lewis Research Center, Cleveland, OH 44135
J. Eng. Mater. Technol. Apr 1994, 116(2): 215-221 (7 pages)
Published Online: April 1, 1994
Article history
Received:
March 22, 1993
Online:
April 29, 2008
Citation
Pindera, M., and Freed, A. D. (April 1, 1994). "The Effect of Matrix Microstructure on Thermally Induced Residual Stresses in SiC/Titanium Aluminide Composites." ASME. J. Eng. Mater. Technol. April 1994; 116(2): 215–221. https://doi.org/10.1115/1.2904276
Download citation file:
Get Email Alerts
Modeling Growth and Viscous Flow of Oxide on Cylindrical Silicon Surfaces Including Piezoviscous Inhibition
J. Eng. Mater. Technol (April 2025)
Thermal Conductivity of 3D-Printed Metal Using Extrusion-Based Metal Additive Manufacturing Process
J. Eng. Mater. Technol (April 2025)
Related Articles
Low-Temperature Compressive Strength of Glass-Fiber-Reinforced
Polymer Composites
J. Offshore Mech. Arct. Eng (August,1994)
Dynamic Fracture in Brittle Solids at High Rates of Loading
J. Appl. Mech (May,2003)
Residual Thermal Stresses Due to Cool-Down of Epoxy-Resin Composites
J. Appl. Mech (September,1979)
A Micromechanical Damage Model for Uniaxially Reinforced Composites Weakened by Interfacial Arc Microcracks
J. Appl. Mech (December,1991)
Related Proceedings Papers
Related Chapters
In Situ Observations of the Failure Mechanisms of Hydrided Zircaloy-4
Zirconium in the Nuclear Industry: 20th International Symposium
Fatigue Failure Mechanisms in a Unidirectionally Reinforced Composite Material
Fatigue of Composite Materials
Research on Strengthening Mechanism of Plant Root in Slope Protection
Geological Engineering: Proceedings of the 1 st International Conference (ICGE 2007)