Actuators for physical human-robot interaction (pHRI) such as rehabilitation or assistive systems should generate the desired torque precisely. However, the resistive and inertia loads inherent in the actuators (e.g., friction, damping, and inertia) set challenges in the control of actuators in a force/torque mode. The resistive factors include nonlinear effects and should be considered in the controller design to generate the desired force accurately. Moreover, the uncertainties in the plant dynamics make the precise torque control difficult. In this paper, nonlinear control algorithms are exploited for a rotary series elastic actuator to generate the desired torque precisely in the presence of nonlinear resistive factors and modeling uncertainty. The sliding mode control smoothed by a boundary layer is applied to enhance the robustness for the modeling uncertainty without chattering phenomenon. In this paper, the rotary series elastic actuator (RSEA) is installed on the knee joint of an orthosis, and the thickness of the boundary layer is changed by gait phases in order to minimize the torque error without the chattering phenomenon. The performance of the proposed controller is verified by experiments with actual walking motions.
Skip Nav Destination
Article navigation
September 2011
Research Papers
Gait Phase-Based Control for a Rotary Series Elastic Actuator Assisting the Knee Joint
Joonbum Bae,
Joonbum Bae
Department of Mechanical Engineering,
University of California
, Berkeley, CA 94720 e-mail:
Search for other works by this author on:
Kyoungchul Kong,
Kyoungchul Kong
Department of Mechanical Engineering,
Sogang University
, Seoul, Korea 121-742 e-mail:
Search for other works by this author on:
Masayoshi Tomizuka
Masayoshi Tomizuka
Department of Mechanical Engineering,
University of California
, Berkeley, CA 94720 e-mail:
Search for other works by this author on:
Joonbum Bae
Department of Mechanical Engineering,
University of California
, Berkeley, CA 94720 e-mail:
Kyoungchul Kong
Department of Mechanical Engineering,
Sogang University
, Seoul, Korea 121-742 e-mail:
Masayoshi Tomizuka
Department of Mechanical Engineering,
University of California
, Berkeley, CA 94720 e-mail: J. Med. Devices. Sep 2011, 5(3): 031010 (6 pages)
Published Online: August 23, 2011
Article history
Received:
December 31, 2010
Revised:
July 18, 2011
Accepted:
July 26, 2011
Online:
August 23, 2011
Published:
August 23, 2011
Citation
Bae, J., Kong, K., and Tomizuka, M. (August 23, 2011). "Gait Phase-Based Control for a Rotary Series Elastic Actuator Assisting the Knee Joint." ASME. J. Med. Devices. September 2011; 5(3): 031010. https://doi.org/10.1115/1.4004793
Download citation file:
Get Email Alerts
Validation of a Repurposed pH Monitoring Capsule for Cecal Applications Using Novel Synthetic Cecal Contents
J. Med. Devices (March 2025)
Related Articles
Modeling and Control Considerations for Powered Lower-Limb Orthoses: A Design Study for Assisted STS
J. Med. Devices (June,2007)
An Efficient Robotic Tendon for Gait Assistance
J Biomech Eng (October,2006)
An Improved Smart Ankle Foot Othosis Design Using Dual Fluid Power Cylinders
J. Med. Devices (June,2010)
Design of a Variable Stiffness Actuator Based on Flexures
J. Mechanisms Robotics (August,2011)
Related Proceedings Papers
Related Chapters
QP Based Encoder Feedback Control
Robot Manipulator Redundancy Resolution
Stable Analysis on Speed Adaptive Observer in Low Speed Operation
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
Fans and Air Handling Systems
Thermal Management of Telecommunications Equipment