To respond to the urgent needs of verification, training, and drill for full scope severe accident management guidelines (FSSAMG) among nuclear regulators, utilities, and research institutes, the FSSAMG verification and drill system is developed. The FSSAMG includes comprehensive scenarios under power condition, shutdown condition, spent fuel pool (SFP) condition, and refueling conditions. This article summarized the research and development of validation and drill system for FSSAMG by using the severe accident analysis computer code modular accident analysis program 5 (MAAP5). Realistic accident scenarios can be verified and exercised in the developed system to support FSSAMG training, drill, examination, and verification.
Issue Section:
Research Papers
References
1.
EPRI
, 2011
, “MAAP5 User's Manual
,” Burr Ridge, IL.2.
EPRI
, 2012
, “Severe Accident Management Guidance Technical Basis Report
,” Vol. 1
, Electric Power Research Institute, Palo Alto, CA, Report No. 1025295
.https://www.epri.com/#/pages/product/000000000001025295/3.
Yang, Z., He, D., Peng, Z., and Zhang, J.,
2012
, “Severe Accident Management Guidance for Ningde Nuclear Power Plant Unit 1 and Unit 2. ZB.NF.12YZ.ND4.006
,” Rev.A, 2, p. 2
.4.
Luo, H.,
2013
, “PSA-HD User Guide. UG PSA-HD
,” GSE Power Systems, Inc., Sykesville, MD, p. 6
.5.
Zhang
, J.
, 2013
, “Full Range Simulation Validation Verification Engineer Station Human Machine Interface Design Report
,” China Nuclear Power Technology Research Institute Press, Shenzhen, China.6.
Zhao
, X.
, Liu
, D.
, Wang
, J.
, and He
, T.
, 2013
, “Software Development of Severe Accident Simulation Based on SAMG Sequence
,” Nucl. Power Eng.
, 30
(z1
), p. 212.7.
Kim, K., Park, S., Song, Y., and Ahn, K.,
2010
, “Development of Desktop Sever Accident Training Simulator
,” Nucl. Eng. Technol.
, 42
(2
), pp. 151–162.8.
Chen, Y., Chang, Y., and Wang, T.,
2010
, “A Real-Time Computer Graphical User Interface for Advanced Boiling Water Reactor Case Comparison Using MAAP Software
,” International Computer Symposium
(ICS
), Tainan, Taiwan, Dec. 16–18, Vol. 1
, pp. 274–278.Copyright © 2017 by ASME
You do not currently have access to this content.