Dynamics of a large moored floating body in ocean waves involves frequency dependent added mass and radiation damping as well as the linear and nonlinear mooring line characteristics. Usually, the added mass and radiation damping matrices can be estimated either by potential theory-based calculations or by experiments. The nonlinear mooring line properties are usually quantified by experimental methods. In this paper, we attempt to use a nonlinear system identification approach, specifically the reverse multiple input-single output (R-MISO) method, to coupled surge-pitch response (two-degrees-of-freedom) of a large floating system in random ocean waves with linear and cubic nonlinear mooring line stiffnesses. The system mass matrix has both frequency independent and frequency dependent components whereas its damping matrix has only frequency dependent components. The excitation force and moment due to linear monochromatic waves which act on the system are assumed to be known that can either be calculated or obtained from experiments. For numerical illustration, a floating half-spheroid is adopted. The motion as well as the loading are simulated assuming Pierson-Moskowitz (PM) spectrum and these results have been analyzed by the R-MISO method yielding frequency dependent coupled added mass and radiation damping coefficients, as well as linear and nonlinear stiffness coefficients of mooring lines satisfactorily.
Skip Nav Destination
e-mail: pselvam@sercm.org
Article navigation
August 2006
Technical Papers
System Identification of a Coupled Two DOF Moored Floating Body in Random Ocean Waves
R. Panneer Selvam,
R. Panneer Selvam
Wind Engineering Laboratory,
e-mail: pselvam@sercm.org
Structural Engineering Research Center
, CSIR Campus Chennai, India
Search for other works by this author on:
S. K. Bhattacharyya
S. K. Bhattacharyya
Department of Ocean Engineering,
Indian Institute of Technology Madras
, Chennai, India
Search for other works by this author on:
R. Panneer Selvam
Wind Engineering Laboratory,
Structural Engineering Research Center
, CSIR Campus Chennai, Indiae-mail: pselvam@sercm.org
S. K. Bhattacharyya
Department of Ocean Engineering,
Indian Institute of Technology Madras
, Chennai, IndiaJ. Offshore Mech. Arct. Eng. Aug 2006, 128(3): 191-202 (12 pages)
Published Online: December 23, 2005
Article history
Received:
July 27, 2005
Revised:
December 23, 2005
Citation
Selvam, R. P., and Bhattacharyya, S. K. (December 23, 2005). "System Identification of a Coupled Two DOF Moored Floating Body in Random Ocean Waves." ASME. J. Offshore Mech. Arct. Eng. August 2006; 128(3): 191–202. https://doi.org/10.1115/1.2199557
Download citation file:
Get Email Alerts
Cited By
Slamming characteristics of a rigid wedge during symmetric and asymmetric water entry
J. Offshore Mech. Arct. Eng
Layout Optimization of Wave Energy Park Based on Multi-Objective Optimization Algorithm
J. Offshore Mech. Arct. Eng
Wear of Wave Energy Converters Mooring Lines Belts
J. Offshore Mech. Arct. Eng (April 2025)
Related Articles
Parameter Identification of a Large Floating Body in Random Ocean Waves by Reverse MISO Method
J. Offshore Mech. Arct. Eng (May,2003)
Nonlinear Model for Sub- and Superharmonic Motions of a MDOF Moored Structure, Part 1—System Identification
J. Offshore Mech. Arct. Eng (November,2005)
JOMAE Special Issue on Ocean Engineering
J. Offshore Mech. Arct. Eng (February,2003)
Design, Analysis, and Evaluation of the UC-Berkeley Wave-Energy Extractor
J. Offshore Mech. Arct. Eng (May,2012)
Related Proceedings Papers
Related Chapters
The Research on Infrared Radiation Images of Ocean Waves
International Conference on Computer Technology and Development, 3rd (ICCTD 2011)
The Numerical Scheme for the History Force Integrals in Hydrodynamics
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Phase Field/Fluctuating Hydrodynamics Approach for Bubble Nucleation
Proceedings of the 10th International Symposium on Cavitation (CAV2018)