Flow-induced vibrations and hydroelastic instabilities of rectangular parallel-plate assemblies are studied theoretically. The extended Galerkin method is employed to solve the plate equation, while the Fourier transform technique is used to solve for the perturbation pressure from the potential flow equations. The mixed fluid-plate interaction boundary condition leads to a singular integral equation, which is solved numerically. The complex frequencies versus flow velocity and critical velocities are obtained for various plate aspect ratios and channel-height-to-plate-width ratios. The frequencies and critical velocities are found to decrease as the plate length increases and as the channel height decreases. Two types of instability are found, namely, single-mode divergence, mostly in the first mode, and coupled-mode flutter involving adjacent modes. Damping has a significant effect on post-divergence stability and coupled-mode flutter of the system. [S0094-9930(00)00403-0]

Issue Section:
Technical Papers
Keywords:
pressure vessels, nuclear reactor instrumentation, failure (mechanical), vibrations, damping, flow instability, fission reactor coolants, channel flow
Topics:
Boundary-value problems, Damping, Deflection, Flow (Dynamics), Flutter (Aerodynamics), Plates (structures), Pressure, Stability, Fourier transforms, Integral equations, Vibration, Fluids
1.
Doan
,
W. K.
,
1958
, “
The Engineering Test Reactor-A Status Report
,”
Nucleonics
,
16
, No.
1
, pp.
102
–
105
.
1.
Zabriskie, W. L., 1959, “An Experimental Evaluation of the Effect of Length to Width Ratio on the Critical Flow Velocity of Single Plate Assemblies,” General Electric Report No. 59GL209;
2.
also, 1959, AECU-4388, Sept.
1.
Groninger
,
R. D.
, and
Kane
,
J. J.
,
1963
, “
Flow Induced Deflections of Parallel Flat Plates
,”
Nucl. Sci. Eng.
,
16
, pp.
218
–
226
.
2.
Smissaert
,
G. E.
,
1968
, “
Static and Dynamic Hydro-Elastic Instabilities in MTR-Type Fuel Elements, Part I: Introduction and Experimental Investigation
,”
Nucl. Eng. Des.
,
7
, pp.
535
–
546
.
3.
Miller
,
D. R.
,
1960
, “
Critical Flow Velocities for Collapse of Reactor Parallel-Plate Fuel Assemblies
,”
ASME J. Eng. Power
,
82
, pp.
83
–
95
.
4.
Johansson, R. B., 1960, “Hydraulic Instability of Reactor Parallel Plate Fuel Assemblies,” Nuclear Engineering Science Conference, April 4–7, Preprint Paper No. 57.
5.
Scavuzzo
,
R. J.
,
1965
, “
Hydraulic Instability of Flat Parallel-Plate Assemblies
,”
Nucl. Sci. Eng.
,
21
, pp.
463
–
472
.
6.
Wambsganss
,
M. W.
,
1967
, “
Second-Order Effects as Related to Critical Coolant Flow Velocities and Reactor Parallel Plate Fuel Assemblies
,”
Nucl. Eng. Des.
,
5
, pp.
268
–
276
.
7.
Rosenberg
,
G. S.
, and
Youngdahl
,
C. K.
,
1962
, “
A Simplified Dynamic Model for the Vibration Frequencies and Critical Coolant Flow Velocities for Reactor Parallel Plate Fuel Assemblies
,”
Nucl. Sci. Eng.
,
13
, pp.
91
–
102
.
8.
Smissaert
,
G. E.
,
1969
, “
Static and Dynamic Hydro-Elastic Instabilities in MTR-Type Fuel Elements, Part II: Theoretical Investigation and Discussion
,”
Nucl. Eng. Des.
,
9
, pp.
105
–
122
.
9.
Davis, D. C., and Kim, G., 1991, “Design against Hydrodynamic Instabilities in Flat-Plate Type Fuel Element Assemblies,” Trans., 11th International Conference on Structural Mechanics in Reactor Technology (SMiRT), J, pp. 105–109.
10.
Epstein
,
R. J.
,
Srinivasan
,
R.
, and
Dowell
,
E. H.
,
1995
, “
Flutter of an Infinitely Long Panel in a Duct
,”
AIAA J.
,
33
, No.
1
, pp.
109
–
115
.
11.
Erdogan
,
F.
, and
Gupta
,
G. D.
,
1972
, “
On the Numerical Solution of Singular Integral Equations
,”
Q. Appl. Math.
,
29
, pp.
525
–
534
.
12.
Paı¨doussis, M. P., 1998, Fluid-Structure Interactions: Slender Structures and Axial Flow, Vol. 1, Academic, London, U.K., pp. 130–132.
13.
Weaver
,
D. S.
, and
Unny
,
T. E.
,
1970
, “
The Hydroelastic Stability of a Flat Plate
,”
ASME J. Appl. Mech.
,
37
, pp.
823
–
827
.
14.
Higuchi
,
K.
, and
Dowell
,
E. H.
,
1992
, “
Effects of Structural Damping on Flutter of Plates with a Follower Force
,”
AIAA J.
,
33
, No.
3
, pp.
820
–
825
.
Copyright © 2000
 by ASME
You do not currently have access to this content.