In a previous paper, a cost-efficient modal analysis method for the vibration of a floating roof coupled with nonlinear sloshing in a circular cylindrical oil storage tank is presented. This method is extended to the case in which the out-of-plane deformation of the roof-deck caused by the radial second mode of sloshing induces an elliptical deformation of the pontoon around the deck. First, the radial contraction of the deck is calculated from the slope of the out-of-plane deformation of the deck, and the following two points are confirmed: (i) the circumferential variation in this radial contraction results in the elliptical deformation of the pontoon, and (ii) the present theoretical prediction for the radial contraction is in good agreement with a numerical result obtained by LS-DYNA. Based on these points, the stresses arising in the pontoon are calculated by considering the contraction of the deck as an enforced displacement of the pontoon. Numerical results show that (a) the elliptical deformation of the pontoon causes a large circumferential in-plane stress, (b) reduction achieved by the increase in the thickness of the deck is larger for the radial contraction of the deck and the stresses in the pontoon than for the out-of-plane deformation of the deck, and (c) the radial contraction of the deck for a fixed value of the out-of-plane deformation of the deck increases with the decrease in the radius of the deck.
Skip Nav Destination
Article navigation
April 2010
Research Papers
Vibration Analysis of a Floating Roof Subjected to Radial Second Mode of Sloshing
M. Utsumi,
M. Utsumi
Department of Machine Element, Technical Research Laboratory,
IHI Corporation
, 1 Shinnakaharacho, Isogo-ku, Yokohama, Kanagawa Prefecture 235-8501, Japan
Search for other works by this author on:
K. Ishida
K. Ishida
Energy and Plant,
IHI Corporation
, 1-1 Toyosu 3-chome, Koto-ku, Tokyo 135-8710, Japan
Search for other works by this author on:
M. Utsumi
Department of Machine Element, Technical Research Laboratory,
IHI Corporation
, 1 Shinnakaharacho, Isogo-ku, Yokohama, Kanagawa Prefecture 235-8501, Japan
K. Ishida
Energy and Plant,
IHI Corporation
, 1-1 Toyosu 3-chome, Koto-ku, Tokyo 135-8710, JapanJ. Pressure Vessel Technol. Apr 2010, 132(2): 021303 (8 pages)
Published Online: March 30, 2010
Article history
Received:
August 27, 2008
Revised:
February 22, 2009
Online:
March 30, 2010
Published:
March 30, 2010
Citation
Utsumi, M., and Ishida, K. (March 30, 2010). "Vibration Analysis of a Floating Roof Subjected to Radial Second Mode of Sloshing." ASME. J. Pressure Vessel Technol. April 2010; 132(2): 021303. https://doi.org/10.1115/1.3148083
Download citation file:
Get Email Alerts
Cited By
The Behavior of Elbow Elements at Pure Bending Applications Compared to Beam and Shell Element Models
J. Pressure Vessel Technol (February 2025)
Related Articles
Vibration Analysis of a Floating Roof Taking Into Account the Nonlinearity of Sloshing
J. Appl. Mech (July,2008)
Elliptical Deformation of a Floating Roof Pontoon Due to Radial Second Mode of Sloshing (Effect of the Geometry of Pontoon Cross-Section on the Hoop Membrane Stress)
J. Pressure Vessel Technol (October,2011)
Internal Resonance of a Floating Roof Subjected to Nonlinear Sloshing
J. Appl. Mech (January,2010)
Nonlinear Vibrations and Chaos in Floating Roofs
J. Comput. Nonlinear Dynam (April,2012)
Related Chapters
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design
Analysis of Components: Strain- and Deformation-Controlled Limits
Design & Analysis of ASME Boiler and Pressure Vessel Components in the Creep Range
Analysis of Components Strain and Deformation-Controlled Limits
Analysis of ASME Boiler, Pressure Vessel, and Nuclear Components in the Creep Range