Volume 130 Issue 4 | J. Pressure Vessel Technol.

Skip Nav Destination

Research Papers

Design and Analysis

A Novel and Simple Approach for Predicting Creep Life Based on Tertiary Creep Behavior

Khosrow Zarrabi, Lawrence Ng

J. Pressure Vessel Technol. November 2008, 130(4): 041201. doi: https://doi.org/10.1115/1.2967879

Abstract

View articletitled, A Novel and Simple Approach for Predicting Creep Life Based on Tertiary Creep Behavior

Open the PDF for in another window

Topics: Creep , Damage , Stress

Study of Parameter Effects on Residual Stresses and Thermal Deformation of Brazed Plate-Fin Structure Using Finite Element Method

Hu Chen, Jian-Ming Gong, Shan-Tung Tu, Lu-Yang Geng

J. Pressure Vessel Technol. November 2008, 130(4): 041202. doi: https://doi.org/10.1115/1.2967740

Abstract

View articletitled, Study of Parameter Effects on Residual Stresses and Thermal Deformation of Brazed Plate-Fin Structure Using Finite Element Method

Open the PDF for in another window

Topics: Brazing , Filler metals , Thermal deformation , Stress , Residual stresses , Temperature , Vacuum , Finite element analysis , Pressure , Finite element methods

Finite Element Analysis of the Effect of Brazed Residual Stress on Creep for Stainless Steel Plate-Fin Structure

Wen-Chun Jiang, Jian-Ming Gong, Hu Chen, S. T. Tu

J. Pressure Vessel Technol. November 2008, 130(4): 041203. doi: https://doi.org/10.1115/1.2967807

Abstract

View articletitled, Finite Element Analysis of the Effect of Brazed Residual Stress on Creep for Stainless Steel Plate-Fin Structure

Open the PDF for in another window

Topics: Creep , Finite element analysis , Stainless steel , Stress , Brazing

Modeling the Effects of Initial Tube-Tubesheet Clearance, Wall Reduction and Material Strain Hardening on Rolled Joint Strength

A. Al-Aboodi, N. Merah, A. R. Shuaib, Y. Al-Nassar, S. S. Al-Anizi

J. Pressure Vessel Technol. November 2008, 130(4): 041204. doi: https://doi.org/10.1115/1.2967809

Abstract

View articletitled, Modeling the Effects of Initial Tube-Tubesheet Clearance, Wall Reduction and Material Strain Hardening on Rolled Joint Strength

Open the PDF for in another window

Topics: Clearances (Engineering) , Stress , Work hardening , Rollers , Pressure , Finite element analysis

Elastoplastic Analysis of a Miniature Circular Disk Bending Specimen

Vishnu Verma, A. K. Ghosh, G. Behera, Kamal Sharma, R. K. Singh

J. Pressure Vessel Technol. November 2008, 130(4): 041205. doi: https://doi.org/10.1115/1.2967812

Abstract

View articletitled, Elastoplastic Analysis of a Miniature Circular Disk Bending Specimen

Open the PDF for in another window

Topics: Deflection , Disks , Finite element analysis , Stress , Yield stress , Steel , Ductility

An Inverse Method for the Determination of Thermal Stress-Intensity Factors Under Arbitrary Thermal-Shocks

J. Meeker, A. E. Segall, E. Gondar

J. Pressure Vessel Technol. November 2008, 130(4): 041206. doi: https://doi.org/10.1115/1.2967737

Abstract

View articletitled, An Inverse Method for the Determination of Thermal Stress-Intensity Factors Under Arbitrary Thermal-Shocks

Open the PDF for in another window

Topics: Fracture (Materials) , Stress , Temperature , Thermal shock , Temperature distribution , Polynomials , Slabs

Structural Integrity Assessment of Steam Generator Tube by the Use of Heterogeneous Finite Element Method

Xinjian Duan, Michael J. Kozluk, Sandra Pagan, Brian Mills

J. Pressure Vessel Technol. November 2008, 130(4): 041207. doi: https://doi.org/10.1115/1.2967727

Abstract

View articletitled, Structural Integrity Assessment of Steam Generator Tube by the Use of Heterogeneous Finite Element Method

Open the PDF for in another window

Topics: Boilers , Failure , Pressure , Finite element methods , Finite element model , Finite element analysis , Failure mechanisms , Condition monitoring

Failure Modes of Perforated Material Under Finite Deformation

Xinjian Duan, Arnaud Weck, David S. Wilkinson, Don R. Metzger

J. Pressure Vessel Technol. November 2008, 130(4): 041208. doi: https://doi.org/10.1115/1.2967881

Abstract

View articletitled, Failure Modes of Perforated Material Under Finite Deformation

Open the PDF for in another window

Topics: Deformation , Failure mechanisms , Fracture (Materials) , Fracture (Process) , Failure , Finite element model

General Variable Material Property Formulation for the Solution of Autofrettaged Thick-Walled Tubes With Constant Axial Strains

G. H. Farrahi, E. Hosseinian, A. Assempour

J. Pressure Vessel Technol. November 2008, 130(4): 041209. doi: https://doi.org/10.1115/1.2973239

Abstract

View articletitled, General Variable Material Property Formulation for the Solution of Autofrettaged Thick-Walled Tubes With Constant Axial Strains

Open the PDF for in another window

Topics: Autofrettage , Plane strain , Materials properties

Study of Plastic Limit Load on Pressurized Cylinders With Lateral Nozzle

N. Li, Z. F. Sang, G. E. O. Widera

J. Pressure Vessel Technol. November 2008, 130(4): 041210. doi: https://doi.org/10.1115/1.2967743

Abstract

View articletitled, Study of Plastic Limit Load on Pressurized Cylinders With Lateral Nozzle

Open the PDF for in another window

Topics: Cylinders , Finite element analysis , Nozzles , Stress , Vessels , Computer simulation , Deformation

A 3-D Model for Evaluating the Residual Stress Field Due to Swage Autofrettage

J. Perry, M. Perl

J. Pressure Vessel Technol. November 2008, 130(4): 041211. doi: https://doi.org/10.1115/1.2967741

Abstract

View articletitled, A 3-D Model for Evaluating the Residual Stress Field Due to Swage Autofrettage

Open the PDF for in another window

Topics: Autofrettage , Stress , Three-dimensional models , Pressure , Displacement

The Assessment of Residual Stress Effects on Ductile Tearing Using Continuum Damage Mechanics

Andrew H. Sherry, Mark A. Wilkes, John K. Sharples, Peter J. Budden

J. Pressure Vessel Technol. November 2008, 130(4): 041212. doi: https://doi.org/10.1115/1.2967876

Abstract

View articletitled, The Assessment of Residual Stress Effects on Ductile Tearing Using Continuum Damage Mechanics

Open the PDF for in another window

Topics: Ductile fracture , Fracture (Materials) , Stress , Calibration , Residual stresses , Fracture toughness , Damage mechanics , Plane strain

Fluid-Structure Interaction

$J$ -Resistance Properties of Narrow Gap GTAW Welds for Ferritic Primary Loop Piping

One Yoo, Ki-Seok Yoon, Tack-Sang Choi, Bong-Sang Lee, Min-Chul Kim

J. Pressure Vessel Technol. November 2008, 130(4): 041301. doi: https://doi.org/10.1115/1.2967810

Abstract

View articletitled, <math xmlns="http://www.w3.org/1998/Math/MathML"><mi xmlns="">J</mi></math>-Resistance Properties of Narrow Gap GTAW Welds for Ferritic Primary Loop Piping

Open the PDF for in another window

Topics: Fracture toughness , Pipes , Welded joints , Welding , Fracture (Materials)

Characteristics of the Suppression of Sloshing in a Vessel by a Bulkhead

Nobuyuki Kobayashi, Masahiro Watanabe, Tomokazu Honda, Katsunori Ohno

J. Pressure Vessel Technol. November 2008, 130(4): 041302. doi: https://doi.org/10.1115/1.2967828

Abstract

View articletitled, Characteristics of the Suppression of Sloshing in a Vessel by a Bulkhead

Open the PDF for in another window

Topics: Breakwaters , Damping , Flow (Dynamics) , Sloshing , Vessels , Vortices , Excitation

Harmonic Analysis of a Cylinder Cluster in Square Confinement With Position-Dependent Fluid Damping

Radu Pomirleanu

J. Pressure Vessel Technol. November 2008, 130(4): 041303. doi: https://doi.org/10.1115/1.2967755

Abstract

View articletitled, Harmonic Analysis of a Cylinder Cluster in Square Confinement With Position-Dependent Fluid Damping

Open the PDF for in another window

Topics: Cylinders , Damping , Fluids , Modal analysis , Vibration , Fuel rods , Finite element analysis

Materials and Fabrication

Effect of High-Pressure Hydrogen Gas on Fracture of Austenitic Steels

C. San Marchi, D. K. Balch, K. Nibur, B. P. Somerday

J. Pressure Vessel Technol. November 2008, 130(4): 041401. doi: https://doi.org/10.1115/1.2967833

Abstract

View articletitled, Effect of High-Pressure Hydrogen Gas on Fracture of Austenitic Steels

Open the PDF for in another window

Topics: Fracture (Materials) , Fracture (Process) , High pressure (Physics) , Hydrogen , Stainless steel , Ductility , Alloys , Yield strength

Determination of $J$ -Integral Using the Load-COD Record for Circumferential Through-Wall Cracked Pipes

Nam-Su Huh, Yun-Jae Kim

J. Pressure Vessel Technol. November 2008, 130(4): 041402. doi: https://doi.org/10.1115/1.2967830

Abstract

View articletitled, Determination of <math xmlns="http://www.w3.org/1998/Math/MathML"><mi xmlns="">J</mi></math>-Integral Using the Load-COD Record for Circumferential Through-Wall Cracked Pipes

Open the PDF for in another window

Topics: Displacement , Finite element analysis , Fracture (Materials) , Pipes , Stress , Tension , Testing

Computational and Experimental Studies of High Temperature Crack Initiation in the Presence of Residual Stress

Noel P. O’Dowd, Kamran M. Nikbin, Robert C. Wimpory, Farid R. Biglari, Manus P. O’Donnell

J. Pressure Vessel Technol. November 2008, 130(4): 041403. doi: https://doi.org/10.1115/1.2967831

Abstract

View articletitled, Computational and Experimental Studies of High Temperature Crack Initiation in the Presence of Residual Stress

Open the PDF for in another window

Topics: Creep , Stress , Finite element analysis , Damage , Fracture (Materials)

Seismic Engineering

Discrete Models for Seismic Analysis of Liquid Storage Tanks of Arbitrary Shape and Fill Height

G. C. Drosos, A. A. Dimas, D. L. Karabalis

J. Pressure Vessel Technol. November 2008, 130(4): 041801. doi: https://doi.org/10.1115/1.2967834

Abstract

View articletitled, Discrete Models for Seismic Analysis of Liquid Storage Tanks of Arbitrary Shape and Fill Height

Open the PDF for in another window

Topics: Finite element methods , Finite element model , Fluids , Pressure , Seismic analysis , Shapes , Sloshing , Storage tanks , Springs , Excitation

Research Papers

Design and Analysis

A Novel and Simple Approach for Predicting Creep Life Based on Tertiary Creep Behavior

Study of Parameter Effects on Residual Stresses and Thermal Deformation of Brazed Plate-Fin Structure Using Finite Element Method

Finite Element Analysis of the Effect of Brazed Residual Stress on Creep for Stainless Steel Plate-Fin Structure

Modeling the Effects of Initial Tube-Tubesheet Clearance, Wall Reduction and Material Strain Hardening on Rolled Joint Strength

Elastoplastic Analysis of a Miniature Circular Disk Bending Specimen

An Inverse Method for the Determination of Thermal Stress-Intensity Factors Under Arbitrary Thermal-Shocks

Structural Integrity Assessment of Steam Generator Tube by the Use of Heterogeneous Finite Element Method

Failure Modes of Perforated Material Under Finite Deformation

General Variable Material Property Formulation for the Solution of Autofrettaged Thick-Walled Tubes With Constant Axial Strains

Study of Plastic Limit Load on Pressurized Cylinders With Lateral Nozzle

A 3-D Model for Evaluating the Residual Stress Field Due to Swage Autofrettage

The Assessment of Residual Stress Effects on Ductile Tearing Using Continuum Damage Mechanics

Fluid-Structure Interaction

$J$ -Resistance Properties of Narrow Gap GTAW Welds for Ferritic Primary Loop Piping

Characteristics of the Suppression of Sloshing in a Vessel by a Bulkhead

Harmonic Analysis of a Cylinder Cluster in Square Confinement With Position-Dependent Fluid Damping

Materials and Fabrication

Effect of High-Pressure Hydrogen Gas on Fracture of Austenitic Steels

Determination of $J$ -Integral Using the Load-COD Record for Circumferential Through-Wall Cracked Pipes

Computational and Experimental Studies of High Temperature Crack Initiation in the Presence of Residual Stress

Seismic Engineering

Discrete Models for Seismic Analysis of Liquid Storage Tanks of Arbitrary Shape and Fill Height

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Design and Analysis

Fluid-Structure Interaction

Materials and Fabrication

Seismic Engineering

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only