Skip Nav Destination
Issues
April 2009
ISSN 0094-9930
EISSN 1528-8978
Research Papers
Design and Analysis
On the Effect of External Bending Loads in Bolted Flange Joints
J. Pressure Vessel Technol. April 2009, 131(2): 021201.
doi: https://doi.org/10.1115/1.3006895
Topics:
Flanges
,
Gaskets
,
Leakage
,
Stress
,
Finite element analysis
,
Bolted flanges
One-Dimensional Moving Heat Source in a Hollow FGM Cylinder
J. Pressure Vessel Technol. April 2009, 131(2): 021202.
doi: https://doi.org/10.1115/1.3006953
Leakage Predictions for Static Gasket Based on the Porous Media Theory
J. Pressure Vessel Technol. April 2009, 131(2): 021203.
doi: https://doi.org/10.1115/1.3008031
Topics:
Gaskets
,
Leakage
,
Porous materials
,
Flow (Dynamics)
,
Permeability
Mechanical Analysis and Optimal Design for Carbon Fiber Resin Composite Wound Hydrogen Storage Vessel With Aluminum Alloy Liner
J. Pressure Vessel Technol. April 2009, 131(2): 021204.
doi: https://doi.org/10.1115/1.3027459
Topics:
Aluminum alloys
,
Carbon fibers
,
Composite materials
,
Cylinders
,
Design
,
Hydrogen storage
,
Pressure
,
Resins
,
Stress
,
Vessels
The Effect of the Distance From the Center of a Weld to the Fixed End on the Residual Stress and Stress Intensity Factor of a Piping Weld
J. Pressure Vessel Technol. April 2009, 131(2): 021205.
doi: https://doi.org/10.1115/1.3007428
Topics:
Pipes
,
Stress
,
Fracture (Materials)
Plastic Collapse Load for Vessel With External Flaw Simultaneously Subjected to Internal Pressure and External Bending Moment: Experimental and FEA Results
J. Pressure Vessel Technol. April 2009, 131(2): 021206.
doi: https://doi.org/10.1115/1.3027472
Topics:
Collapse
,
Finite element analysis
,
Fitness-for-service
,
Pressure
,
Stress
,
Cylinders
,
Yield stress
,
Vessels
Residual Stress in an Autofrettaged Tube Taking Bauschinger Effect as a Function of the Prior Plastic Strain
J. Pressure Vessel Technol. April 2009, 131(2): 021207.
doi: https://doi.org/10.1115/1.3062937
Topics:
Autofrettage
,
Stress
,
Stress analysis (Engineering)
,
Stress concentration
,
Yield stress
,
Young's modulus
,
Plasticity
,
Steel
,
Stress-strain curves
,
Cylinders
Development of Maximum Secondary Creep Strain Method for Lifetime of HDPE Pipes
J. Pressure Vessel Technol. April 2009, 131(2): 021208.
doi: https://doi.org/10.1115/1.3066913
Prediction of Fully Plastic Collapse Stresses for Pipes With Two Circumferential Flaws
J. Pressure Vessel Technol. April 2009, 131(2): 021209.
doi: https://doi.org/10.1115/1.3066967
Cyclic and Fatigue Behavior of the P355NL1 Steel Under Block Loading
J. Pressure Vessel Technol. April 2009, 131(2): 021210.
doi: https://doi.org/10.1115/1.3062965
An Efficient Computing Explicit Method for Structural Dynamics
J. Pressure Vessel Technol. April 2009, 131(2): 021211.
doi: https://doi.org/10.1115/1.3066850
Topics:
Algorithms
,
Degrees of freedom
,
Hardening
,
Stability
,
Stiffness
,
Structural dynamics
,
Nonlinear systems
,
Damping
Thermal Stress Distribution in Thick Wall Cylinder Under Thermal Shock
J. Pressure Vessel Technol. April 2009, 131(2): 021212.
doi: https://doi.org/10.1115/1.3066882
Topics:
Cylinders
,
Laplace transforms
,
Temperature
,
Thermal shock
,
Thermal stresses
,
Stress concentration
,
Heat conduction
,
Pressure
Simplified Limit Load Determination Using the -Tangent Method
J. Pressure Vessel Technol. April 2009, 131(2): 021213.
doi: https://doi.org/10.1115/1.3067001
Topics:
Finite element analysis
,
Stress
Fluid-Structure Interaction
Numerical Calculation of Shear Stress Distribution on the Inner Wall Surface of CANDU Reactor Feeder Pipe Conveying Two-Phase Coolant
J. Pressure Vessel Technol. April 2009, 131(2): 021301.
doi: https://doi.org/10.1115/1.3008038
Topics:
Pipes
A Parametric Study of the Resonance Mechanism of Two Tandem Cylinders in Cross-Flow
J. Pressure Vessel Technol. April 2009, 131(2): 021302.
doi: https://doi.org/10.1115/1.3027452
Topics:
Acoustics
,
Cylinders
,
Resonance
,
Flow (Dynamics)
,
Vortex shedding
Sloshing in a Cylindrical Liquid Storage Tank With a Single-Deck Type Floating Roof Under Seismic Excitation
J. Pressure Vessel Technol. April 2009, 131(2): 021303.
doi: https://doi.org/10.1115/1.3062939
Topics:
Roofs
,
Sloshing
,
Storage tanks
,
Excitation
,
Stiffness
,
Equations of motion
Materials and Fabrication
An Anisotropic Creep Damage Model for Anisotropic Weld Metal
J. Pressure Vessel Technol. April 2009, 131(2): 021401.
doi: https://doi.org/10.1115/1.3007429
An Experimental Study of the Crack Growth Behavior of 16MnR Pressure Vessel Steel
J. Pressure Vessel Technol. April 2009, 131(2): 021402.
doi: https://doi.org/10.1115/1.3008034
Topics:
Fracture (Materials)
,
Stress
,
Steel
,
Pressure vessels
Multiaxial Fatigue of 16MnR Steel
J. Pressure Vessel Technol. April 2009, 131(2): 021403.
doi: https://doi.org/10.1115/1.3008041
Topics:
Fatigue
,
Shear (Mechanics)
,
Steel
,
Stress
,
Torsion
,
Fracture (Process)
,
Fatigue life
,
Fatigue damage
,
Fracture (Materials)
,
Tension
Dynamic Strength Estimates for a High-Strength Experimental Steel
J. Pressure Vessel Technol. April 2009, 131(2): 021404.
doi: https://doi.org/10.1115/1.3027453
Ratcheting of Stainless Steel 304 Under Multiaxial Nonproportional Loading
J. Pressure Vessel Technol. April 2009, 131(2): 021405.
doi: https://doi.org/10.1115/1.3027498
Topics:
Hardening
,
Kinematics
,
Stainless steel
,
Stress
,
Cycles
,
Constitutive equations
Evaluation of Microstructures and Creep Damages in the HAZ of P91 Steel Weldment
J. Pressure Vessel Technol. April 2009, 131(2): 021406.
doi: https://doi.org/10.1115/1.3028021
Topics:
Creep
,
Damage
,
Steel
,
Welded joints
Fatigue Damage Behavior of a Structural Component Made of P355NL1 Steel Under Block Loading
J. Pressure Vessel Technol. April 2009, 131(2): 021407.
doi: https://doi.org/10.1115/1.3066774
Topics:
Cycles
,
Fatigue
,
Fatigue damage
,
Steel
,
Stress
,
Structural elements (Construction)
,
Damage
,
Failure
A Comparison of Two- and Three-Dimensional Fracture Assessments in the Presence of Residual Stresses
J. Pressure Vessel Technol. April 2009, 131(2): 021408.
doi: https://doi.org/10.1115/1.3066938
Topics:
Failure
,
Fracture (Materials)
,
Residual stresses
,
Stress
,
Hardening
,
Modeling
,
Finite element analysis
,
Fracture (Process)
A Review of the Effects of Coolant Environments on the Fatigue Life of LWR Structural Materials
J. Pressure Vessel Technol. April 2009, 131(2): 021409.
doi: https://doi.org/10.1115/1.3027496
Topics:
Alloys
,
Carbon
,
Cycles
,
Fatigue
,
Fatigue design
,
Fatigue life
,
Light water reactors
,
Steel
,
Water
,
Stress
Trends and Cost Analysis of AWJ Operation at Pressure
J. Pressure Vessel Technol. April 2009, 131(2): 021410.
doi: https://doi.org/10.1115/1.3008033
Topics:
Cutting
,
Flow (Dynamics)
,
Pressure
,
Aluminum
Nde
Three-Dimensional Identification of Semi-Elliptical Crack on the Back Surface by Means of Direct-Current Electrical Potential Difference Method With Multiple-Probe Sensor (PVP2006-ICPVT-11-93359)
J. Pressure Vessel Technol. April 2009, 131(2): 021501.
doi: https://doi.org/10.1115/1.3006952
Topics:
Fracture (Materials)
,
Probes
,
Sensors
,
Electric potential
Image Fusion for Infrared Thermography and Inspection of Pressure Vessel
J. Pressure Vessel Technol. April 2009, 131(2): 021502.
doi: https://doi.org/10.1115/1.3066801
Pipeline Systems
Leak Detection in a Pipeline Using Modified Line Volume Balance and Sequential Probability Tests
J. Pressure Vessel Technol. April 2009, 131(2): 021701.
doi: https://doi.org/10.1115/1.3062936
Topics:
Leakage
,
Pipelines
,
Flow (Dynamics)
,
Probability
,
Pressure
Technology Reviews
Applicable Contact Force Models for the Discrete Element Method: The Single Particle Perspective
J. Pressure Vessel Technol. April 2009, 131(2): 024001.
doi: https://doi.org/10.1115/1.3040682
A Review Paper on Aging Effects in Alloy 617 for Gen IV Nuclear Reactor Applications
J. Pressure Vessel Technol. April 2009, 131(2): 024002.
doi: https://doi.org/10.1115/1.2967885
Proposed New Fatigue Design Curves for Carbon and Low-Alloy Steels in High Temperature Water
J. Pressure Vessel Technol. April 2009, 131(2): 024003.
doi: https://doi.org/10.1115/1.3006896
Topics:
Alloys
,
ASME Standards
,
Carbon
,
Fatigue
,
Fatigue design
,
Fatigue strength
,
Fracture (Materials)
,
Steel
,
Water
,
Fatigue cracks
Technical Briefs
True Cross Sectional Area of Screw Threads With Helix and Root Radius Geometries Taken Into Consideration
J. Pressure Vessel Technol. April 2009, 131(2): 024501.
doi: https://doi.org/10.1115/1.2967884
Topics:
Screw threads
,
Thread
,
Algebra
Optical Strain Measurement Techniques to Assist in Life Monitoring of Power Plant Components
J. Pressure Vessel Technol. April 2009, 131(2): 024502.
doi: https://doi.org/10.1115/1.3062935
Topics:
Creep
,
Gages
,
Pipes
,
Power stations
,
Strain gages
,
Strain measurement
,
Steel
,
Finite element analysis
,
Errors
,
Steam
Risk-Based Inspection Analysis for High-Pressure Hydrogenation Cracking Unit
J. Pressure Vessel Technol. April 2009, 131(2): 024503.
doi: https://doi.org/10.1115/1.3006949
Topics:
Damage
,
Failure
,
Fracture (Process)
,
High pressure (Physics)
,
Inspection
,
Pipes
,
Risk
,
Risk-based inspection
,
Corrosion
,
Failure mechanisms
Email alerts
RSS Feeds
Measurement of Steam-Generator-Tube Vibration Damping Caused by Anti-Vibration-Bar Supports
J. Pressure Vessel Technol (February 2025)
Surface Strain Measurement for Non-Intrusive Internal Pressure Evaluation of a Cannon
J. Pressure Vessel Technol (December 2024)
Dynamic Response and Damage Analysis of a Large Steel Tank Impacted by an Explosive Fragment
J. Pressure Vessel Technol (February 2025)