Solar desalination is an important way to obtain fresh water. Nowadays, the all-glass evacuated tube with only one open end (blind pipe) is widely used in hot-water system, and the glass-metal evacuated tube is commonly used in solar trough concentrating system in medium temperature area. But both of them have drawbacks for seawater desalination. The former cannot quickly heat seawater to 100 °C, and the latter is expensive and fails to make full use of its high temperature advantage. A new design of a medium-temperature full-glass evacuated tube whose inner tube is wound by a spiral structure is proposed in to achieve a more cost-effective solar trough concentrating system for solar desalination. The sealing stress between inner and outer tube is analyzed and the thermal performance is tested. The results showed that the evacuated tube could withstand temperature of 250 °C, quickly heat seawater, and has good corrosion resistance and can keep a long-term vacuum. Such a tube enables seawater to flow directly without oil heat-exchange system, so it is a more promising solution for seawater desalination.

References

1.
Price
,
H.
,
Lupfert
,
E.
,
Kearney
,
D.
,
Zarza
,
E.
,
Cohen
,
G.
,
Gee
,
R.
, and
Mahoney
,
R.
,
2002
, “
Advances in Parabolic Trough Solar Power Technology
,”
ASME J. Sol. Energy Eng.
,
124
(
2
), pp.
109
125
.
2.
Lei
,
D.
,
Wang
,
Z.
, and
Li
,
J.
,
2010
, “
The Calculation and Analysis of Glass-to-Metal Sealing Stress in Solar Absorber Tube
,”
Renewable Energy
,
35
(
2
), pp.
405
411
.
3.
Lei
,
D.
,
Wang
,
Z.
, and
Li
,
J.
,
2010
, “
The Analysis of Residual Stress in Glass-to-Metal Seals for Solar Receiver Tube
,”
Mater. Des.
,
31
(
4
), pp.
1813
1820
.
4.
Stollo
,
A.
,
Chiarappa
,
T.
,
D'Angelo
,
A.
,
Maccari
,
A.
, and
Matino
,
F.
,
2016
, “
LCOE Reduction Parabolic Trough CSP: Innovative Solar Receiver With Improved Performance at Medium Temperature
,”
AIP Conf. Proc.
1734
(
1
), p.
030034
.
5.
Wei
,
C.
, and
Jiming
,
D.
,
2010
, “The UV Quartz Glass,” CN201584425U[P].
6.
Shekoofa
,
O.
,
Wang
,
J.
,
Qi
,
J.
,
Zhang
,
J.
, and
Yin
,
Z.
,
2014
, “
Analysis of Residual Stress for Mismatch Metal–Glass Seals in Solar Evacuated Tubes
,”
Sol. Energy Mater. Sol. Cells
,
128
(
2
), pp.
421
426
.
7.
Wang
,
M.
,
Tao
,
H. E.
, and
Bin
,
L. U.
,
2013
, “
Application Analysis on Medium Temperature Solar Thermal Technology
,”
Building Sci.
, 29(2), pp. 7–9,52.
8.
Boonchom
,
K.
,
Vorasingha
,
A.
,
Ketjoy
,
N.
,
Souvakon
,
C.
, and
Bongkarn
,
T.
,
2007
, “
Performance Evaluation of a Helix Tube Solar Collector System
,”
Int. J. Energy Res.
,
31
(
12
), pp.
1169
1179
.
9.
Bourouni
,
K.
,
Martin
,
R.
,
Tadrist
,
L.
, and
Chaibi
,
M. T.
,
1999
, “
Heat Transfer and Evaporation in Geothermal Desalination Units
,”
Appl. Energy
,
64
(
1–4
), pp.
129
147
.
10.
You
,
H.
,
2015
, “An All-Glass Evacuated Solar Collecting Tube,” CN104344581A[P].
11.
Cui
,
W.
,
Li
,
L.
,
Xin
,
M.
,
Jen
,
T.-C.
,
Chen
,
Q.
, and
Liao
,
Q.
,
2006
, “
A Heat Transfer Correlation of Flow Boiling in Micro-Finned Helically Coiled Tube
,”
Int. J. Heat Mass Transfer
,
49
(
17–18
), pp.
2851
2858
.
12.
Hongwen
,
L.
,
1985
,
Mechanics of Advanced Materials
,
Higher Education Press
, Beijing, China.
13.
ISO, 1998, “Borosilicate Glass 3.3—Properties,” International Organization for Standardization, Geneva, Switzerland, Standard No.
ISO 3585–1998
.https://www.iso.org/standard/24774.html
You do not currently have access to this content.