Skip Nav Destination
Issues
May 2021
ISSN 0090-3973
EISSN 1945-7553
In this Issue
Technical Papers
A New Application of Generalized Linear Failure Rate Distribution in Agriculture Using Ranked Set Sampling
J. Test. Eval.. May 2021, 49(3): 1379–1388.
doi: https://doi.org/10.1520/JTE20180952
A Novel Oscillation-Free Force Measurement for the Determination of Material Properties during High-Speed Tests
J. Test. Eval.. May 2021, 49(3): 1389–1411.
doi: https://doi.org/10.1520/JTE20180887
A Proposition to Standardize the Microstructural Grain Size Measurements of Hip Stems
Patricia O. Cubillos, Claudio T. dos Santos, Vinícius O. dos Santos, Ieda M. V. Caminha, Edison da Rosa, Carlos R. M. Roesler
J. Test. Eval.. May 2021, 49(3): 1412–1422.
doi: https://doi.org/10.1520/JTE20190038
A Study of Photon Interaction with Phantom Material Made of Rhizophora Spp. Binderless Particleboard in the Energy Range 59.54–356 keV
J. Test. Eval.. May 2021, 49(3): 1423–1432.
doi: https://doi.org/10.1520/JTE20180866
An Experimental Study on Physical, Mechanical, and CO2 Permeability Behavior of Sandstone after High-Temperature Treatment
J. Test. Eval.. May 2021, 49(3): 1433–1453.
doi: https://doi.org/10.1520/JTE20190915
Analyzing and Predicting Permeability Coefficient of Roller-Compacted Concrete (RCC)
J. Test. Eval.. May 2021, 49(3): 1454–1473.
doi: https://doi.org/10.1520/JTE20180718
Anisotropic Damage Model of Soft and Hard Composite Rock and Experimental Verification
J. Test. Eval.. May 2021, 49(3): 1474–1488.
doi: https://doi.org/10.1520/JTE20180756
Application of Replicas in the Measurement of the Wear of Forging Dies with Deep Hollows Using a Laser Scanner
J. Test. Eval.. May 2021, 49(3): 1489–1502.
doi: https://doi.org/10.1520/JTE20180807
Auxiliary Particle Filter–Based Multisensor Data Fusion for Quantification of Corrosion in Aerostructures
J. Test. Eval.. May 2021, 49(3): 1503–1515.
doi: https://doi.org/10.1520/JTE20180705
Breast Cancer Diagnosis Based on Feature Extraction Using Dynamic Models of Thermal Imaging and Deep Autoencoder Neural Networks
J. Test. Eval.. May 2021, 49(3): 1516–1532.
doi: https://doi.org/10.1520/JTE20200044
Comparison of Test Methodologies for Computing Bending and Shear Stiffness of Cross-Laminated Timber
J. Test. Eval.. May 2021, 49(3): 1533–1549.
doi: https://doi.org/10.1520/JTE20200121
Comparison of Thermally Measured Setting of Cement Paste and Penetrometer Measured Setting of Ready Mixed Concrete
J. Test. Eval.. May 2021, 49(3): 1550–1569.
doi: https://doi.org/10.1520/JTE20180745
Correspondence Relationship between the Maximum Tensile Stress and Cycle Number during the Initial Stage of Low-Cycle Fatigue Test
J. Test. Eval.. May 2021, 49(3): 1570–1585.
doi: https://doi.org/10.1520/JTE20200087
Design and Manufacture of a Magnetorheological Brake System Applicable for Wheelchair Manipulations
J. Test. Eval.. May 2021, 49(3): 1586–1598.
doi: https://doi.org/10.1520/JTE20180926
Design of Compliant Mechanism Microgripper Utilizing the Hoekens Straight Line Mechanism
J. Test. Eval.. May 2021, 49(3): 1599–1612.
doi: https://doi.org/10.1520/JTE20190091
Design Optimization of Instrumented Strikers for Charpy V-Notch Pendulum Impact Testing
J. Test. Eval.. May 2021, 49(3): 1613–1630.
doi: https://doi.org/10.1520/JTE20180878
Development and Characterization of Kevlar-Reinforced Ceramic Composite Materials
J. Test. Eval.. May 2021, 49(3): 1631–1650.
doi: https://doi.org/10.1520/JTE20190873
Development of a Drop Weight Machine for Adhesive Joint Testing
Diogo P. C. Antunes, António M. Lopes, Carlos M. S. Moreira da Silva, Lucas F. M. da Silva, Paulo D. P. Nunes, Eduardo A. S. Marques, Ricardo J. C. Carbas
J. Test. Eval.. May 2021, 49(3): 1651–1673.
doi: https://doi.org/10.1520/JTE20190147
Dynamic Modulus Characteristics of Mixtures Containing Recycled Asphalt Pavements, Warm Mix Additives, and Antistrip Agents
J. Test. Eval.. May 2021, 49(3): 1674–1690.
doi: https://doi.org/10.1520/JTE20200006
Dynamic Response of Ballastless Track XCC Pile-Raft Foundation under Train Axle Loads
J. Test. Eval.. May 2021, 49(3): 1691–1704.
doi: https://doi.org/10.1520/JTE20180032
Effect of Grain Refinement by Laser Surface Treatment on Cell Adhesion Behavior of AZ91D Magnesium Alloy
Changgang Guo, Lingqian Wang, Jiansong Zhou, Baocheng Cao, Yimeng Xu, Bushra Sufyan Almaqrami, Bowu Zhu
J. Test. Eval.. May 2021, 49(3): 1705–1715.
doi: https://doi.org/10.1520/JTE20180779
Effect of Process-Induced Resin Bead on the Measured Tensile Strength of Polyacrylonitrile-Based Carbon Fibers
J. Test. Eval.. May 2021, 49(3): 1716–1728.
doi: https://doi.org/10.1520/JTE20180471
Evaluation of Calibration Procedures of British Pendulum Tester
J. Test. Eval.. May 2021, 49(3): 1729–1746.
doi: https://doi.org/10.1520/JTE20200288
Experimental Study on Road Base Material of Geopolymer Recycled Concrete
J. Test. Eval.. May 2021, 49(3): 1747–1762.
doi: https://doi.org/10.1520/JTE20180100
Experimental Validation of a New Antivibration Elastomeric Material Fabricated from End-of-Life Tires for Slab Track Systems with Embedded Rail
Jorge Gómez, José Antonio Casado, Isidro A. Carrascal, Soraya Diego, Diego Ferreño, Catalina Mondragón
J. Test. Eval.. May 2021, 49(3): 1763–1777.
doi: https://doi.org/10.1520/JTE20180804
Experimental Validation of Photovoltaic System with Isolated Dual Inductor dc-dc Converter for Grid-Connected Application
J. Test. Eval.. May 2021, 49(3): 1778–1796.
doi: https://doi.org/10.1520/JTE20190122
Fatigue Performance of Polyamide 12 Additively Manufactured Structures Designed with Topology Optimization
J. Test. Eval.. May 2021, 49(3): 1797–1813.
doi: https://doi.org/10.1520/JTE20180793
Feasibility Study on Functionalization of Mesoporous Titanium Dioxide by Electron Beam Irradiation for Smart Delivery of Oncology Drugs
S. Ghafoorzadeh, M. Askarbioki, S. P. Shirmardi, S. Khakshournia, S. Kargar, A. Amooee, R. Ranjbar Jamalabadi, E. Saniei
J. Test. Eval.. May 2021, 49(3): 1814–1823.
doi: https://doi.org/10.1520/JTE20200192
Functional Assessment of Port Pavements: The Case of Container Terminals
J. Test. Eval.. May 2021, 49(3): 1824–1836.
doi: https://doi.org/10.1520/JTE20180729
Identification and Sizing of Neighboring Pits Using Three-Axis Magnetic Flux Leakage Technique
J. Test. Eval.. May 2021, 49(3): 1837–1852.
doi: https://doi.org/10.1520/JTE20180287
Indentation Creep Response and Rupture Mechanisms in GLARE: Experimental and Statistical Evaluation
J. Test. Eval.. May 2021, 49(3): 1853–1863.
doi: https://doi.org/10.1520/JTE20180965
Investigation of Cryogenically Treated Physical Vapor Deposition TiAlN/NbN-Coated Carbide Inserts in End Milling of Hard Titanium Alloy
J. Test. Eval.. May 2021, 49(3): 1864–1878.
doi: https://doi.org/10.1520/JTE20180728
Investigation of the Coarse Aggregate Texture Property Using an Improved Laplacian Smoothing Algorithm
J. Test. Eval.. May 2021, 49(3): 1879–1896.
doi: https://doi.org/10.1520/JTE20180626
Laboratory Investigation of the Composite of Slurry Seal Asphalt Reinforced by Hybrid Nanomaterials and Fiber
J. Test. Eval.. May 2021, 49(3): 1897–1913.
doi: https://doi.org/10.1520/JTE20180805
Laboratory Measurement of Excavation Disturbance Effect Due to Trenchless Construction Using Distributed Fiber Optics Strain Sensing
J. Test. Eval.. May 2021, 49(3): 1914–1926.
doi: https://doi.org/10.1520/JTE20180645
Mechanical Properties Improvement of Polyvinyl Acetate Polymer-Treated Sand with Plant Fiber Reinforcement
Jin Liu, Xiao Shi, Changqing Qi, Zhihao Chen, Fan Bu, Wei Qian, Canhui Jiang, Xiaowei Lan, Zezhuo Song
J. Test. Eval.. May 2021, 49(3): 1927–1941.
doi: https://doi.org/10.1520/JTE20190883
Observations of Machining Performance during Turning AA6351-B4C Composite
J. Test. Eval.. May 2021, 49(3): 1942–1955.
doi: https://doi.org/10.1520/JTE20180429
Optimization of Process Parameters of Epoxy Granite for Strength and Damping Characteristics Using TOPSIS Method
Shanmugam Chinnuraj, Thyla Pudukarai Ramaswamy, Mohanram Pidugun Venkatachalam, Mahendrakumar Nataraj, Ramu Murugan, Mohanraj Selvakumar, Shanmugasundaram Dhandabani, K. N. ManojKumar
J. Test. Eval.. May 2021, 49(3): 1956–1975.
doi: https://doi.org/10.1520/JTE20190002
Physio-Mechanical Characterization of Rocks
J. Test. Eval.. May 2021, 49(3): 1976–1998.
doi: https://doi.org/10.1520/JTE20180955
Portable WIM Systems: Comparison of Sensor Installation Methods for Site-Specific Traffic Data Measurements
Lubinda F. Walubita, Enad Mahmoud, Luis Fuentes, Julius J. Komba, Eyoab Zegeye Teshale, Abu N. M. Faruk
J. Test. Eval.. May 2021, 49(3): 1999–2016.
doi: https://doi.org/10.1520/JTE20190040
Shear Behavior of Crushed Mudstone and Claystone under Macrostructural and Microstructural Approaches
J. Test. Eval.. May 2021, 49(3): 2017–2027.
doi: https://doi.org/10.1520/JTE20180486
Synergetic Effect of Multi-Dimensional Nanomaterials on Aging Resistance of Asphalt
J. Test. Eval.. May 2021, 49(3): 2028–2034.
doi: https://doi.org/10.1520/JTE20200391
Tensile Testing of Carbon FRP (CFRP) and Glass FRP (GFRP) Bars: An Experimental Study
J. Test. Eval.. May 2021, 49(3): 2035–2050.
doi: https://doi.org/10.1520/JTE20180660
Test and Evaluation of Using Thermoelectric Technology to Monitor the Wear of the Journal Bearing of a Diesel Engine
J. Test. Eval.. May 2021, 49(3): 2051–2064.
doi: https://doi.org/10.1520/JTE20180630
Testing and Evaluation on Dynamic Response of a New Modified Soil Subgrade under Freeze-Thaw Cycles
J. Test. Eval.. May 2021, 49(3): 2065–2081.
doi: https://doi.org/10.1520/JTE20180635
The Adaptive Amplitude-Phase Control for Sinusoidal Fatigue Test of Automobile Engine Flywheel
J. Test. Eval.. May 2021, 49(3): 2082–2097.
doi: https://doi.org/10.1520/JTE20180272
The Early Hydration Characteristics of Cement-GGBS Pastes Based on Calorimetry and Electrical Resistivity Measurements
J. Test. Eval.. May 2021, 49(3): 2098–2107.
doi: https://doi.org/10.1520/JTE20180289
The Effect of Graphene Nanoplatelets on Chloride Binding and Chloride Migration in Cement Paste
J. Test. Eval.. May 2021, 49(3): 2108–2118.
doi: https://doi.org/10.1520/JTE20200198
Thermal Performance of Single Glazing Flat Plate Photovoltaic Thermal Hybrid System with Various Air Channels
J. Test. Eval.. May 2021, 49(3): 2119–2150.
doi: https://doi.org/10.1520/JTE20170750
Review Articles
Comparative Studies on the Ablation/Erosion Mechanisms of Silicone Rubber Composites under Erosion of Different Particles by New Testing Method
J. Test. Eval.. May 2021, 49(3): 2151–2161.
doi: https://doi.org/10.1520/JTE20180305
Technical Notes
An Approach to Characterize the Impact Absorption Performance of Construction Helmets in Top Impact
J. Test. Eval.. May 2021, 49(3): 2162–2174.
doi: https://doi.org/10.1520/JTE20180604
An Investigation and Optimization Study of Borax Content in the Slime Products
J. Test. Eval.. May 2021, 49(3): 2175–2186.
doi: https://doi.org/10.1520/JTE20200212
Evaluation of Cement Paste Cylinder Preparation Methods for Mechanical Property Measurements
J. Test. Eval.. May 2021, 49(3): 2187–2196.
doi: https://doi.org/10.1520/JTE20180798
Email alerts
RSS Feeds
Mechanical Evaluation of Asphalt Mixtures Containing Recycled Bituminous Membranes (RBMs)
J. Test. Eval. (November 2025)
Microcrack Propagation of Basalt Fiber Reinforced Pavement Concrete under Wheel Load and Freeze-Thaw Cycles Coupling
J. Test. Eval. (November 2025)
Materials, Performance Studies, and Application Progress of Fiber-Reinforced 3D-Printed Concrete
J. Test. Eval. (July 2025)
