Yamamoto [1] examined a vertical Jeffcott rotor model with bearing clearances and showed that a small bearing “dead-band” clearance could have a dramatic influence on synchronous rotor response. Recent test results for a turbopump in a liquid-rocket-engine development program showed a twice-running-speed response (2E) on the order of 8 gs over a wide speed range, while synchronous response levels were only at an 0.5 g level. Childs [2] predicted a sharp 2E response for the Advanced Technology Development, High-Pressure Fuel Turbopump (ATD-HPFTP) of the Space Shuttle Main Engine due to bearing clearances, when the running speed was nearly one half of a housing-mode natural frequency, i.e., when the 2E frequency was close to the housing mode natural frequency. However, his model did not predict significant 2E response over a broad running-speed range. Ellipticity of the bearing dead-band clearances was suggested as a possible cause for the observed 2E phenomenon. An extension of Yamamoto’s analysis [1] is presented including bearing ellipticity to examine that proposed explanation. The analysis results show that clearance ellipticity will produce 2E response over a considerable running-speed range during which the bearing clearance is engaged; however, the predicted 2E-response amplitude corresponding to an ellipticity of 0.1 were about 10% of the synchronous levels, and the projected 2E acceleration levels were about 40% of synchronous. The predicted 2E response includes a resonance peak (that can be sharp) at speeds slightly above 25% of the rotor critical speed. The perturbation-analysis results provide an explanation for persistent, lower 2E-response levels observed in many turbopumps, but do not explain the high levels observed with this turbopump.
Skip Nav Destination
Article navigation
January 2003
Technical Papers
Twice-Running-Speed Response Due to Elliptical Bearing Clearances
Dara W. Childs, Leland T. Jordan Professor of Mechanical Engineering,
Dara W. Childs, Leland T. Jordan Professor of Mechanical Engineering,
Turbomachinery Laboratory, Texas A&M University, College Station, TX 77843
Search for other works by this author on:
Dara W. Childs, Leland T. Jordan Professor of Mechanical Engineering,
Turbomachinery Laboratory, Texas A&M University, College Station, TX 77843
Contributed by the Technical Committee on Vibration and Sound for publication in the JOURNAL OF VIBRATION AND ACOUSTICS. Manuscript received December 2001; Revised September 2002. Associate Editor. G. W. Flowers.
J. Vib. Acoust. Jan 2003, 125(1): 64-67 (4 pages)
Published Online: January 6, 2003
Article history
Received:
December 1, 2001
Revised:
September 1, 2002
Online:
January 6, 2003
Citation
Childs, D. W. (January 6, 2003). "Twice-Running-Speed Response Due to Elliptical Bearing Clearances ." ASME. J. Vib. Acoust. January 2003; 125(1): 64–67. https://doi.org/10.1115/1.1526509
Download citation file:
Get Email Alerts
Cited By
Related Articles
Vibration Characteristics of the HPOTP (High-Pressure Oxygen Turbopump) of the SSME (Space Shuttle Main Engine)
J. Eng. Gas Turbines Power (January,1985)
Recent Developments in Turbomachinery Modeling for Improved Balancing and Vibration Response Analysis
J. Eng. Gas Turbines Power (July,2005)
Steady-State Analysis of a Nonlinear Rotor-Housing System
J. Eng. Gas Turbines Power (October,1991)
Spiral Vibration of a Turbogenerator Set: Case History, Stability Analysis, Measurements and Operational Experience
J. Eng. Gas Turbines Power (January,2008)
Related Proceedings Papers
Related Chapters
A Dynamic Risk Assessment of Space Shuttle Two Engine out Contingency Abort Scenarios (PSAM-0095)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)
Unbalance
Fundamentals of Rotating Machinery Diagnostics
Research Tools
Bearing Dynamic Coefficients in Rotordynamics: Computation Methods and Practical Applications