This paper describes a numerical and experimental investigation on the flexural wave propagation properties of a novel class of negative Poisson’s ratio honeycombs with tetrachiral topology. Tetrachiral honeycombs are structures defined by cylinders connected by four tangent ligaments, leading to a negative Poisson’s ratio (auxetic) behavior in the plane due to combined cylinder rotation and bending of the ribs. A Bloch wave approach is applied to the representative unit cell of the honeycomb to calculate the dispersion characteristics and phase constant surfaces varying the geometric parameters of the unit cell. The modal density of the tetrachiral lattice and of a sandwich panel having the tetrachiral as core is extracted from the integration of the phase constant surfaces, and compared with the experimental ones obtained from measurements using scanning laser vibrometers.
Skip Nav Destination
e-mail: f.scarpa@bristol.ac.uk
Article navigation
June 2010
Research Papers
Wave Propagation in Auxetic Tetrachiral Honeycombs
K. F. Tee,
K. F. Tee
Department of Aerospace Engineering,
University of Bristol
, Bristol BS8 1TR, UK
Search for other works by this author on:
A. Spadoni,
A. Spadoni
Aerospace,
California Institute of Technology
, MC 105–50, Pasadena, CA 91125
Search for other works by this author on:
F. Scarpa,
F. Scarpa
Department of Aerospace Engineering,
e-mail: f.scarpa@bristol.ac.uk
University of Bristol
, Bristol BS8 1TR, UK
Search for other works by this author on:
M. Ruzzene
M. Ruzzene
School of Aerospace Engineering,
Georgia Institute of Technology
, Ferst Drive, Atlanta, GA
Search for other works by this author on:
K. F. Tee
Department of Aerospace Engineering,
University of Bristol
, Bristol BS8 1TR, UK
A. Spadoni
Aerospace,
California Institute of Technology
, MC 105–50, Pasadena, CA 91125
F. Scarpa
Department of Aerospace Engineering,
University of Bristol
, Bristol BS8 1TR, UKe-mail: f.scarpa@bristol.ac.uk
M. Ruzzene
School of Aerospace Engineering,
Georgia Institute of Technology
, Ferst Drive, Atlanta, GAJ. Vib. Acoust. Jun 2010, 132(3): 031007 (8 pages)
Published Online: April 22, 2010
Article history
Received:
March 11, 2009
Revised:
November 10, 2009
Online:
April 22, 2010
Published:
April 22, 2010
Citation
Tee, K. F., Spadoni, A., Scarpa, F., and Ruzzene, M. (April 22, 2010). "Wave Propagation in Auxetic Tetrachiral Honeycombs." ASME. J. Vib. Acoust. June 2010; 132(3): 031007. https://doi.org/10.1115/1.4000785
Download citation file:
Get Email Alerts
Designing Topological Acoustic Lattices via Electroacoustic Analogies
J. Vib. Acoust (October 2023)
On the Feasibility of Dynamic Substructuring for Hybrid Testing of Vibrating Structures
J. Vib. Acoust (August 2023)
Related Articles
Kirigami Auxetic Pyramidal Core: Mechanical Properties and Wave Propagation Analysis in Damped Lattice
J. Vib. Acoust (August,2013)
Lightweight Actuator Structure With SMA Honeycomb Core and CFRP Skins
J. Mech. Des (January,2011)
A Material-Mask Overlay Strategy for Continuum Topology Optimization of Compliant Mechanisms Using Honeycomb Discretization
J. Mech. Des (August,2008)
The Imperfection Sensitivity of Isotropic Two-Dimensional Elastic Lattices
J. Appl. Mech (September,2008)
Related Proceedings Papers
Related Chapters
Transverse Free Vibration Analysis of Hybrid SPR Steel Joints
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)
Concluding Remarks and Future Work
Ultrasonic Welding of Lithium-Ion Batteries
Vibration Measurement and Load Identification of Offshore Platforms
International Conference on Mechanical and Electrical Technology 2009 (ICMET 2009)